🎮 Shield your Switch in style—clarity, toughness, and touch perfected!
The iVoler 3-Pack Tempered Glass Screen Protectors are precision-engineered for the Nintendo Switch 2017 and New Model HAC-001(-01). Featuring ultra-clear 99.9% HD transparency, a resilient 9H hardness rating, and an ultra-thin 0.3mm profile, these protectors deliver superior scratch resistance without compromising touchscreen sensitivity. Each pack includes three protectors, installation wipes, and a guide, ensuring effortless application and lasting screen defense.
Finish Type | Glossy |
Water Resistance Level | Water Resistant |
Screen Surface Description | Glossy |
Clarity | 99.90 |
Screen Size | 6.2 Inches |
Compatible Phone Models | Nintendo Switch 6.2 inch |
Special Features | Scratch Resistant |
Compatible Devices | Nintendo Switch 6.2 inch |
Item Hardness | 9H |
Unit Count | 3 Count |
Number of Items | 3 |
Item Dimensions L x W | 6.34"L x 3.65"W |
Material Type | Tempered Glass |
M**
Toddler Proof
I bought these for our switch. With them being so affordable , and coming in a multi pack , I didn’t have high expectations for them. However , my toddler has thrown , spit and stamped the darn thing and STILL has not cracked. I still have the other 2 in the closet. It was easy to apply onto the switch , and was a perfect fit. You honestly can’t tell that it’s on there unless you’re specifically looking for it. The screen protector does not affect the visibility at all. I’m not sure if it’s meant to be, but the protectors seem to also be scratch resistant.
F**Y
Great fit and comes with everything needed for a perfect install!
This pack comes with everything you need to get a perfect, bubble free installation!While the wipes are very small, only about a 2in by 2in square, they are definitely sufficient for the job! The wet wipe is very wet and easily covers the whole screen with the cleaning agent. The dry wipe, while it gets the job done, could benefit from being a little larger just to cut down the amount of time spent drying and removing any remaining debris. The included dust stickers are REALLY sticky which I found to be too much. It is very easy to move the whole device around and even pick it up if too much of the sticker contacts the screen. That can kick up more dust and means you have more to remove from the screen. That said, they do remove dust and debris as they should!What works for me to get a perfect, bubble free installation is as follows:Start with the wet wipe, focus on the edges and corners to get them really clean, but also wet the whole screen. Grab the dry wipe and get the screen dry. Continue to use the dry wipe to get every spec of dust and debris off of the screen. Move the device around under a bright light to see if anything is still attached to the screen. Feel free to grab the wet wipe again to spot treat areas that the dry wipe can't clean easily. The screen doesn't need to be perfectly streak free, just dust and debris free. Don't spend too much time trying to clean and clean as you'll just end up making more work for yourself. Once the screen is dust free, grab the dust removal sticker and gently stick a very small part of it to the screen for easy access.With a perfectly clean screen, hold only the sides of the protector and have the removable film on the bottom side. SLOWLY peel the film off of the back of the screen protector (as in, take 30+ seconds to remove that film). If you go too fast, dust might get sucked into the space between the adhesive and the protective film and then get stuck to the back of the screen protector. If that happens, you'll have a bubble you can't get rid of. Before placing the protector on the device, grab the dust removal sticker and remove any dust that may have fallen on the screen. Be sure to keep the screen protector facing adhesive-side down and don't touch anywhere besides the edges. Once you are confident the screen is 100% dust and debris free, align the left or right edge of the protector with the screen while keeping the other edge a few inches away from the screen. I aim for a tiny gap away from the plastic around the screen, something like a fingernail worth of thickness. Once the gap is even from the top to the bottom of the side edge, simply hold that position with your free hand and completely let go of the protector so it falls down into place. The adhesive should start grabbing and just let it go. If it does not start after a few seconds, gently press on one edge of the protector. Once fully seated, work outwards from the center to remove any air bubbles that may have gotten trapped.Overall, these protectors are a great value and I can absolutely recommend them!
C**K
Great value for money
Works and looks great super easy to install great value for money and no extra glaring.
J**T
A+ for cost and effectiveness.
As often as my son drops his switch, these screen protectors have done a fantastic job protecting it. The instillation was simple and looks as if nothing is there. There isn't any flare reduction in my opinion, but good quality for the price.
G**L
Works fine for what it is, but not the easiest to install
I've bought countless screen protectors for a wide variety of devices over the years, so much so that I can never remember what brand I've bought in the past, but I know I've bought ivoler-brand protectors previously. They're well-made and protect the screen well.However, in this case, the protector for my Switch Lite wasn't as easy as previous ones to install. The wet cleaner was too damp and required extra drying with the dry cloth and to get the streaks out. Then the dust speck removing sticker was pretty hard to use as it seemed to stick a little too well. The instructions weren't very clear either: the picture showed you using the dust sticker to help guide the protector in place, but the text didn't say anything about that. There were also "guide stickers" that the text said nothing about, but were in the pictures. I probably should've followed the pictures because sitting the protector in place by hand was tricky, then I had to remove it twice to clear dust specks I couldn't see originally, but certainly showed up while trying to push out the bubbles. Speaking of which, this kit didn't include a spudger to help press out the air bubbles, which every other protector I've gotten has included.Overall, if you follow the pictures, and can figure out how to use guide stickers and are fine not having a spudger, then I see no reason not to buy this screen protector. Four for this price is very reasonable.
G**
It only protects the screen but not the top corner sides
Great product! It was easy to put on and there weren’t any bubbles left behind.
W**Y
IT WORKS!
This screen protector truly SAVED my switch! I’m the absolute worst at randomly dropping things and literally threw my switch across the floor somehow early this week. When I picked it up I was super nervous thinking the screen itself shattered but thankfully it was just this amazing screen protector! I had misplaced my extras so I ordered a new pack ASAP and will never go without it now. You also can’t beat the price, especially when it works this well!
J**H
Works great
Easy to install and looks great on my new screen.
Trustpilot
2 days ago
4 days ago