Deep Pour Epoxy Resin Kit. 2” Pours, Crystal Clear - 51 Oz | Bubble Free, UV Resistant & Food Safe Casting Resin Epoxy for River Tables, Wood, Flower Preservation & DIY Crafts

This was my first time ever working with epoxy, and I'm so happy with the results. I wanted to preserve the flowers from my mother's spray from her casket, so I REALLY didn't want to mess it up. After watching lots of tutorial videos and reading lots of reviews, I chose this crystal clear deep pour option. It was very easy to work with and there was no smell at all. It was a little messy/sticky, but I wore gloves, covered my work area, and cleaned up immediately afterwards. I made sure that my flowers were completely dried before I began, warmed the bottles each time before use as recommended, made sure I mixed to the precise 2:1 ratio, stirred in one direction to minimize bubbles as recommended for 5 minutes each time, and I poured in thinner layers over several days. I did have a few bubbles, but I monitored after each pour and was able to pop most of them before they hardened. After my final layer I left it to cure for a full 48 hours. They very easily pulled out of the molds (I did use mold release spray that I'd seen in tutorials but don't know that it was necessary) and were completely hardened. One thing that I will note - and I have emailed the seller and waiting for a reply - as other reviews mentioned, I did not have enough hardener for the amount of epoxy, even though I was very careful and precise in my measurements. I originally purchased the 1.5 gallons but needed a little more so I purchased these smaller bottles. I had to use this bottle of hardener to finish out the epoxy from the original purchase, so now I'm left with almost a full bottle of epoxy and very little hardener left (see last photo - the hardener bottle should still be half full for that amount of remaining epoxy). That would be my only complaint about this product, but overall I'm thrilled with my results. As a first time epoxy user, I highly recommend this product! **Edited to add - The seller quickly responded to my message and sent me another set at no charge. Could not be happier with this product or this seller! Highly recommend! 5+ stars

Recieved my order in good time, it was packaged good. This is the first Deep pour I have used. The only issue I had with the instructions was it is 2 to 1 and I know there is more A 2 bottles and only 1 bottle B so that made me think I use 2 parts of A 1 part of B .I did some research to verify this just expected something in the instructions. That does not take away from the product. So I decided to make a big snail added very lite blue and glitter. Just to see how the product took those items. The resin mixed well, was easy to measure, I did have a few bubbles but I figure that is from my lack of experience but the bubbles came out easy and the snail came out clear. I have attached pictures to see what I used for color and the size of the mold I used. I will use the product for any deep pours I try, next up will be a small table with a beach scene. Good value, easy to mix very happy with this product highly recommend this product.

I’ve tried many resin brands but Craft Resin is by far the best out there! Their deep pour epoxy has excellent clarity with no bubbles in sight. You have a long working time and NO ODOR at all. The finish product is strong and crystal clear with no cloudiness. Cure time is about 48hrs which is normal for deep pours. Craft Resins Deep Pour is absolutely worth it. It’s reliable, consistent, and produces a finish that looks high-end every time.

I could smell no odor at all. I have always used a very expensive epoxy (~$900/6 gal). In my experience the expensive epoxy has a toxic smell. It is also a better epoxy for deep pour tables, in my experience. When I mixed this epoxy there were more bubbles than I have ever seen. I was tempted to put it in a vacuum chamber but did not have the time. Poured it, went over it with a torch, and there were still bubbles everywhere. Came back 2 hours later and no bubbles anywhere and it stayed that way. My complaint is the desk top I poured is not as stiff as the expensive epoxy I have used. That said I am hesitant to complain. This epoxy sets much quicker and I took it out of the mold sooner. It deformed and I had to flatten it thinner than I like. My guess now is it might have been fine if I had left it in the mold for the 6 to 7 days I have in the past. This set so quickly I might have rushed it although I did stick to the directions, I think. I also made other mistakes that could have contributed to my problems. The desk top I made was mine and an experiment so I cared less about the outcome. I used wood from a birch tree that fell in a windstorm last winter. I dried the wood myself but as some of the wood was somewhat rotten it dried differently throughout each piece of wood. I tested the wood but with 2" cuts I wonder if I tested and poured too soon.The middle of the harder wood may have been more moist. I ended up putting a hidden backing and some 1" square metal tubing to keep the desk flat. It works, was a fun inexpensive experiment (sale - 3 gallons for $99), and I learned a lot so complaining seems out of line. In any regard, I am getting another 3 gallons to use for lathe projects. I have found that epoxy that is only mostly hardened can be turned without chipping better (still learning turning epoxy). The way this epoxy set seems like it may be perfect. I cannot comment on the clarity as I dyed mine. I am giving it 4 stars for now. May well move it up or down with more experience. Certainly good enough and inexpensive enough to try it again.

Great product. Instructions spot on. Everything came out clear. So happy we use this for our bar top. Did wish the it came with instructions on how to get out of your clothes when it splash is on it. Would definitely buy this product again.

I’ve been using craft resin for a while now and I have to say I have never been disappointed. I wanted to try out the deep pour in a smaller portion to try, so that I can get a big set and make my wedding flowers into a small side table, coasters and clock set. This resin is easy to work with and sets clear. There was no cloudiness, no odor and very minimal bubbles (even though the bubbles might have been my mistake). I tried it on a coaster for a teacher friend and it’s so clear. The price is great and I’m definitely going to continue to use Craft Resin.

This project isn’t like other epoxy resins I have purchased. The other epoxy’s I used had a lot of movement while setting but this one set with very little movement at all. I’m extremely disappointed in it. The project I’m working on looks so boring and probably the worst one I’ve done. I will never buy this epoxy again! If you want epoxy that will have a lot of movement while setting but a more expensive one. You definitely get what you pay for.

First time using resin, easy to use. Sets well. Only a couple bubbles. Was able to make a lot of good crafty projects. High quality resin. I shared some with a friend who uses resin more often and she also highly recommended

Hobbymäßig arbeite ich sehr viel mit Holz und Harz. Deshalb habe ich bisher auch schon zahlreiche Projekte mit Harz umgesetzt vom ganzen Tisch bis zu kleinen Murmeln habe ich schon verschiedene Harz-Systeme verwendet. Bisher hatte ich oft das Problem, dass große Blasen im Harz bleiben oder das Harz sich nach langer Zeit gelblich verfärbt. Aufgrund des guten Preises und der versprochenen Eigenschaften, habe ich für meine aktuellen Projekte mal das Harz von Craft Resin ausprobiert. Schon mal vornweg, es ist das beste Harz was ich bisher verwendet habe. Es lässt sich einfach verarbeiten. Harz und Härter mit einer Küchenwaage je zur Hälfte mischen und anschließend vorsichtig einige Minuten gründlich verrühren. Am besten nicht zu schnell rühren um blasen zu vermeiden. Anschließend kann es verarbeitet werden. Nach 24 Stunden ist es bereits vollständig fest. Neben meinem Kopfhörer-Ständer der mit diesem Harz ausgefüllt wurde und den Ständer auch von außen schützt, habe ich das Harz auch noch für andere Projekte verwendet. Der größte Pluspunkt dabei ist, dass es wirklich glasklar ist. Man sieht es bei den Rohlingen (wird wohl noch Schmuck draus) die ich zusätzlich gemacht habe auf den Bildern. Ein großer Vorteil des Harz-Systems ist auch das es sich selbständig entlüftet. So verschwinden größere Blasen in der Regel von selber. Ganz kleine Blasen bleiben aber manchmal noch drin die dann im Harz eingeschlossen bleiben. Dies kann man jedoch vermeiden, wenn man keine hohe Gießhöhe hat. Laut dem Hersteller kann man bis zu 5 cm auf einmal Gießen. Das hat bei meinem Versuch auch super geklappt ohne das es zu warm geworden ist oder aufgekocht ist. Zusätzlich kann man dem Harz auch Pigmente beimischen um verschiedene Farbakzente zu setzten. Es lässt sich super schleifen und wenn man am Ende noch eine Schicht Harz über die geschliffenen Bereiche macht wird es auch wieder glasklar. Für kleine Projekte wie Schmuck oder kleinere Bauprojekte ist dieses Harz super geeignet und es verblüfft mich, dass es wirklich so Glasklar bleibt. Das habe ich bisher noch bei keinem meiner verwendeten Harz-System gesehen. Auf jeden Fall kann ich dieses Harz mit gutem gewissen weiterempfehlen und werde es auch noch für einige Projekte bei mir in der Werkstatt einsetzten. Preis-Leistung ist top daher gibt es von mir 5 Sterne für das Harz-System von Craft Resin.

Sarà che ho capito male io che non venisse spedito dalla Unione Europea, comunque sono rimasta un po' visto che ho dovuto pagare 13€ di dogana. La prossima volta prenderò un altro fornitore.

This was my first time ever using Epoxy Resin and I couldn't be more happy with the results! I've had the Ikea HEMNES desk for about 2 years and used various products to try protect the wood such as mouse pads and pvc sheets. However their durability wasn't the best and always ended-up having to buy another protection after a couple of months. If any of you are familiar with this type of desk, it can become easily dirty, chipped or stained. There isn't any glossy layer on it, it's just wood with paint so not meant to stay in pristine condition when used daily. Recently I was thinking about a more durable solution while still keeping the desk neat and tidy. I thought about a glass-top but the sound of putting plates of coffee cups on it would have driven me insane with time. I watched some Youtube videos with some people using epoxy resin but it looked really complicated and seemed to require some diy knowledge, which I don't. I was still determined to find a solution and came across this product which seemed more beginner-friendly. I spent some time going through the reviews, checking the instructions for best results and decided to give it a go. * This is how it went: - I put a protective sheet all around the desk (you absolutely need one if doing this at home!!) and mixed the resin and harder together 50/50 as instructed. - I mixed them together slowly for about 5 minutes and poured it straight on the desk. I then used a foam brush which I ordered based on what people were advising in the reviews to spread it on the desk. - And then that's it, all you need to do is wait. - I checked every couple of hours and it settles very quickly. This stuff is stronger than super glue so make sure you use gloves when checking if it's hard. - The dripping eventually stops after a couple of hours. It started settling after 6-12 hours and was fully settled/rock hard after 24 hours. As you can see from the pictures the results are pretty good - I was really happy and impressed by it. I did get a couple of tiny bubbles on the surface but you need to look close to see them and I'm really not bothered by it. I didn't even try to get rid of them with an air dryer or lighter because they're so small it's really not a big deal to me. My desk is 120 cm x 40 cm so 1 bottle of 1L did the job and gave me a layer of about 2-3mm. If you're working on a bigger surface you'll definitely need more. Overall I'm super happy with this product, it's exceeded my expectations and wasn't that hard to do. It does take a bit of preparation, I had to order the sheets and brushes especially for this job but it worked out the same price as getting a glass-top except that this looks and feels better!

Bom preço e qualidade

بصراحه منتج رايع وسهل ولايوجد فيه فقاعات وكانت هادي اول تجرّبه لي ممتاز