Size: approx. 105 x 95 mm. Volume: approx. 160 ml. Consumption guideline: approx. Plasticine 250 g + 64 ml of water. All information includes Base Simply fill the latex moulds with plaster, wax or resin, allow to dry, de-mould, paint individually, done. The latex moulds can be used over and over again. How to do it: 1. Place the latex mould on a cardboard and mark. Then cut out a little smaller so that the filled mould cannot slip through the cardboard and the Hang the appropriate latex mould. 2. Now you have to make the casting material for filling according to the instructions. 3. Fill the mould halfway and lightly tap the edge. The air bubbles escape. Then fill the mould up to the edge of the mould and again at the edge. knock. 4. The finished casting parts can be removed after the drying time (for wax, plaster and resin vary). become the most 5. Allow the finished casting parts to dry, then grade or unclean edges with a sharp knife. Remove carefully. If you pour with wax, you need to attach the wick with some clay at the bottom of the mould and fix the wick to the opening with a rod.
Trustpilot
1 month ago
2 months ago
