LANCOOL 207 Black Compact ATX Case, 4 Pre-Installed Fans

. If you’re on the fence, this is one of those cases that’s easy to recommend and easy to upvote. Build quality: As expected from Lian Li, the materials feel solid and well-finished. No sharp edges, no flimsy panels, and the steel frame feels sturdy without being overly heavy. The side panel fits perfectly and doesn’t flex or rattle. Airflow & thermals: This case absolutely nails airflow. The mesh front is wide open without looking cheap, and airflow-focused layouts clearly drove the design. My CPU and GPU temps dropped noticeably compared to my previous case, even under load. You can tell this was designed by people who actually care about cooling. Layout & ease of building: Cable management is straightforward and forgiving, even if you’re not a perfectionist. There’s plenty of room behind the motherboard tray, sensible routing holes, and good clearance for modern GPUs and air coolers. Everything just makes sense when you’re building in it. Looks: Clean, modern, and not overdone. It looks great on a desk without screaming “RGB gamer box,” but still gives you plenty of room to show off components if that’s your thing. Value: For the price, this case punches way above its weight. You’re getting Lian Li quality, excellent airflow, and a builder-friendly layout without paying a premium. Final thoughts: If you want a case that’s easy to build in, keeps components cool, and looks great. One thing to add is I wouldn’t recommend if you are moving your PC around a lot as it’s all snap in panels.

I got this case to transfer my build from a less desirable one. Building in this case is very easy! The cable management can take a bit of finagling, but it can be done and look well. It's a solid and while compact, does still provide plenty of room to work with. I like the simple, clean looks of the case. The only thing I'm not a fan of is the included front fans (not enough to remove a star). They can be a bit noisy/resonant on the case. I've read that tuning fan curves helps. Ultimately, I installed rubber/silicone gaskets between the case and front fans and the fans are quiet again.

This is an amazing case. 1. Airflow is just perfect, at most you'll need 3 additional fans for exhaust, no need for to buy extra intake fans. 2. RGB looks good and can be disabled if wanted for stealth look. 3. It has built in GPU Support bracket to avoid sag. 4. Opening/Closing is really well design, building a pc is a delight as well as changing components. 5. Front USB-C is a nice detail. 6. Enough space for large gpu and cpu cooling 7. The best case on it's price range. Cons: 1. Due to the placement of the PSU, you might need a modular power supply. 2. Manually switching the PSU requires screwing (fortunately it's a easy screw by hand). 3. Cable management could be difficult on complex builds (RGA controllers, etc). For simple builds this is not a real issue imo. 4. Power supply air intake could have a bit more room. 5. Graphics card intake doesn't have a filter, could led to pet hair / more dust getting into the system. (easily fixable by using a DIY PC Case Dust Mesh Filter).

Saw this a few times on Gamer's Nexus and got it based on their reviews Pros: + Looks great + Cheap price + Cools well + Lots of room despite small size + Easy to install everything + Easy to remove and clean filters/mesh - Fans have annoying humming noticeable when room is quiet - GPU makes contact with case near front of case - Not a lot of room on the side for cable management. Recommend flat cables - No reset button ,only power button - No filter for bottom back intake ~ LED fans cannot be manged in Linux

I'm actually shocked by how good this case if for the price. The metal is more sturdy that other cases I've had that were much more expensive. I love the cable channels and Velcro ties, and this is one of the few cases that I had zero issues getting the back flush so the rear panel goes on easily. The side and top panels all come off easily with no tools and comes with some good quality fans. Make sure your motherboard is a standard ATX and not larger or odd size or it won't fit. Go watch a YouTube video to see all the features before you buy. This case is so great, I'd happily put top-end and expensive components in this case. Looks great as well. I'm honestly just so impressed and as of 2025, this case CANNOT be beat for this price.

A sleek and modern case with excellent airflow. Feels premium too! Important Details: - Cable management is a little tight but not impossible! - Stock fans aren't silent, but they aren't loud by any means. Either way, 4 free fans is a steal, and you can always upgrade them later on! - I would say OpenRGB is the best software to mess around with the RGB fans on the front.

For about $80, this a really nice pc case. You will be hard-pressed to find a case that matches the thermals, the performance, and the price. The front mounted psu is a really cool design which meant there is room for 120mm fans to give fresh air flow your gpu. You will need to be wary of cable size on your psu since it will be a tight fit unless your cables are flat and your psu is fully modular. But, that small negative aside it was rated by Tom's Hardware as the best budget pc case, and Gamer's Nexus said its one of the best performing pc cases they have ever tested (especially in the thermals). So, far I am really happy with it. It does come with a usb-c type header which is also a plus.

I recently built my first PC and used this case due to seeing it being called "the best airflow case." 6 months later, I can confirm this. The case quality is good, and the amount of possible airflow that the case allows is unmatched. It also comes with 4 fans (2 RGB front fans) which work great and I've had no problems so far. My CPU and GPU run cool, and I believe this case is a big reason for that. I have my PC in a stealth build (turned off all RGB), and I think it looks sick. However, the default RGB in the front was VERY cool (though having 2 infinity mirrors that you can't see through the front mesh panel seemed like a weird thing to have). Overall, amazing value, amazing airflow, and amazing case that I'd recommend to anyone.

O vidro lateral do gabinete veio trincado na ponta.

Top

Moving the power supply to the front and pointing fans directly at the GPU is very smart design. Including 4 fans for this price is excellent value. Use a spare fan for rear exhaust and you are set, but the case is so well ventilated only the hottest components would actually need one. This design would also work on carpet if you install the power supply fan up. The intake mesh does get visibly dusty but honestly on cases I've used before that had an open front and a dust filter, the case would get filled with dust regardless of the filter. So I just use a duster on the intakes every few days when I notice it, easier than cleaning dust filters! Only complaint is that the front, top, and both side panels should have optional screw mounts to secure them to the case during shipping. But the front panel magnet and the other panels press in very firmly, so they are unlikely to move unless there is a big impact, you should just have the option like the bottom intake side panel does.

Absolutely fantastic. It's been a good few years since I last built a PC, and it's astonishing to see how much things have progressed since then. The advancements in PC cases alone are remarkable, and I am thoroughly impressed with the features and design of this particular case. One of the standout features is the excellent cable management system. Gone are the days of messy cables cluttering the interior of the case and obstructing airflow. This case provides multiple cable routing options and convenient cutouts, allowing for clean and efficient cable management. It helps keep everything organized and enhances the overall aesthetics of the build. Additionally, there are strategically placed Velcro straps and cable tie points that further assist in securing and managing cables effectively. Another fantastic aspect is the separate section dedicated to the power supply unit (PSU) and hard disk drives (HDDs). This compartmentalization not only improves the organization of components but also contributes to better airflow and cooling performance. The PSU shroud hides unsightly cables and creates a cleaner look inside the case. It also helps isolate the heat generated by the PSU from the rest of the components, ensuring that the system stays cool and runs efficiently. Speaking of airflow, the ventilation system in this case is nothing short of impressive. With strategically placed fan mounts and ample ventilation areas, it provides optimal airflow to keep the components cool even during intense gaming or heavy workloads. The case supports multiple fans and radiators, allowing for various cooling configurations. The well-designed airflow pathways ensure that fresh air is drawn in from the front and expelled from the rear and top, effectively dissipating heat and maintaining stable temperatures. The build quality of the case is also worth mentioning. It feels robust and durable, giving confidence that it will protect the valuable components inside. The materials used are of high quality, and the construction is solid. The case's sturdy frame provides excellent support and reduces vibrations, ensuring a quieter and more stable system. Additionally, the tempered glass panel adds a touch of elegance, showcasing the internal components and any ARGB lighting effects beautifully. Overall, this case offers a remarkable combination of functionality, aesthetics, and build quality. It caters to the needs of modern PC builders, providing them with the tools and features necessary for a clean and efficient build. Whether you're a seasoned builder or someone returning to the world of PC building after a few years, this case is sure to impress with its innovative design and thoughtful features.

Lo mejor en desempeño a un buen precio y tamaño