K1C 3D Printer, 600mm/s High-Speed Auto Leveling Clog-Free Robust Direct Extruder K1 SE Upgraded 3D Printer with AI Camera 300°C Printing Silent Mode Support Carbon Fiber Filaments

Really nice printer... I've been using it for a couple weeks now and printed many things... The best thing to do is to get a dryer along with the 3d printer... It will improve your prints greatly. Also learning to fines the settings helped a lot. I saw a big difference in PETG print quality just changing the temp of the hot bed from 57C to 56C... I recommend downloading other peoples 3d modles from online sources like [Printable.com, makerworld.com or thangs.com] for the door hinges, front plate, exhaust fan upgrades and (riser plates (if you intend on using CF filaments)) to get started and learn about how the cad models work and need to be physically one piece for the Creality Print or Cura to work with them. Most software can only do so much to "repair" models someone might create in Blender... FreeCAD isn't that great but using TinkerCAD with Blender has shown me some decent results and is completely free. AutoDesks 360 fusion looks nice if you have some cash for softwawre they also have a free trial where you can make 9 editable files with there cloudbased software. I have enjoyed this new device since I'm always looking to fix or upgrade things and this allows for SOOOO much more inventive creativity. It has a setting called [ Silent ] too, which slows the printer down to silent volumes which is very awesome since I live next to persnickety people in apartments. It won't turn down the "travel" speed that much so the setting will need to be adjusted inside Creality print advanced settings if true silence is needed since it has insanely quick and efficient motors. It has auto leveling/calibrations, Lan and usb connectivity if you don't trust Wifi and I don't in apartments. It's easy enough to mess the prints up let alone having wifi hackers interrupting file transmissions.. I've heard and seen lid risers are needed to print Carbon Fiber prints due to the angle of the Bowden stock tube... ASA makes a good filament for the risers since its high working temp, rigidness and resistance to chemicals like those emited during prints sometimes. Since starting I haven't had to do much of anything to make it work soundly (since I haven't used CF filaments yet) and that is awesome! Make sure to use glue stick. Customer support is responsive for any needs and many videos online to help replace, upgrade, install, and maintain the device. I used the original plastic off the sides of the machine to help create a better seal on the front door (looks ugly but it's free and came with the machine), this keeps everything nice inside when printing and lowers the dB volume outside. Make sure if you decide to upgrade the back fan that you use a DC24v fan. You can place a piece of active carbon filter where the original fan once was... I also put a 5lbs sand back on the edge of the top of the machine which reduces vibrations and movement of the machine when travel is going fast... Don't place it in the center or you will scratch the bottom of the plate like I accidentally did... Risers would have stopped that but I haven't finished them yet... an old tooth brush with either isopropyl alcohol or water works really well to clean the build plate rather than using rags and having to wash them... plus if you do it right you can use the old glue and just make a nice finish with just a little water and effort.

Simple to use. Never had an issue. Great app. Kids love it and can use it on their own. Prints very quickly. Wish I purchased earlier.

Tis great and easy to use. The u tube directions were easy to follow and the product site was superb to help me operate it

I wanted to love this printer, but the reality has been extremely frustrating. The hardware looks solid, but the software experience is a mess. Multicolor printing with the CFS is confusing, poorly documented, and full of cryptic errors. The printer and slicer constantly fall out of sync — one thinks you’re using the CFS, the other thinks you’re using an external spool, and suddenly prints cancel with zero clear explanation. OrcaSlicer integration feels half-baked. Basic things like reducing purge waste, understanding prime towers, or preventing hundreds of unnecessary filament swaps require digging through GitHub wikis and trial-and-error. Even then, settings frequently reset or disappear without warning. Error messages are vague (“system error, try restarting”), and when the printer locks up, the only fix is a full power cycle. That’s unacceptable at this price point. When it does print, the quality is fine — but getting there is painful. I’ve spent more time troubleshooting menus and redoing slicer profiles than actually printing. This is not a plug-and-play experience, and definitely not suitable for anyone who just wants to print without becoming a firmware and slicer expert. Unless you enjoy debugging software more than printing, I’d look elsewhere.

Awesome printer

Not even a month old yet, and the extruder gear has a big chunk of teeth missing! Printed with pla/cf, pla silk, hyper pla, and pla+. All prints were great until the last one failed, cleaned nozzle, tried again, wouldn't feed. Now I know why. Time to reach out to creality.

This printer is solid and easy to use. I wish I had one when I was younger. However, its use crosses generations. I bought the printer for my daughter. With the help of some downloaded instructions the setup was easy and she completed it in no time (so a big thanks to all the folks who gave setup instructions). My daughter printed a couple of small pieces to assess the speed and functionality of the printer. All corners and edges came out smooth and we will continue to assess durability. I purchased multiple colors, the piece was beautiful with minimal filament loss. I would recommend this printer to others based on its initial use. We can comment later about above when we have used over time.

Right out of the box this thing has been printing great! Ive had it all week and have moved to using this printer as my go to printer so its been running almost non-stop after setup! While it does make some noise but the start up noise sounds almost scifi. With its soild frame it feels pretty durable and with the door and hatch shut its quiet when its not wiping the nozzle. Over all with how easy and high quality the prints have been coming out for my projects at work and around the house its been an absolute blast printing with this machine an i highly recommend it if youre looking at getting one for yourself!

Es una bestia! La velocidad de impresión con hyper PLA es impresionante. Excelente producto

Estoy muy satisfecho con la impresora, si la encuentran de oferta se las recomiendo 100% Me sorprendió mucho 10/10