G4 SlimPWRpatch - Ultra Thin Qi Wireless Receiver NFC Antenna Sticker Card Patch Module for LG G4. Compatible with Verizon, T-Mobile, Sprint. Recommended to use with QiStone+, WoodPuck or KoolPad

This is my first experience with wireless charging and I'm happy to report the SlimPWRpatch from Fonesalesman works like a charm. Besides the clear and easy to understand instructions that comes with the patch, there's also a great step by step video available to watch online before you do the installation. My own installation went perfectly on the first attempt thanks to the quality design of the patch. I've had absolutely no issues at all with aligning my phone on the wireless charging pad- just set it on and it charges every time. I especially liked the pre-allignment adhesive tabs that allow you to test and re-position the patch BEFORE permanently adhering the patch to your phone! One tip I'd like to pass along: The factory installed NFC sticker on my phone came off very hard! I assume because the phone is over a year old and has gone through many charging (warm up / cool down) cycles which apparently makes the sticker dry and brittle. Mine came off in tiny fragments of plastic and dried adhesive, and I resorted to using hot water and Goo-b-Gone to completely remove it! My LG G-4 back cover happens to be the plain plastic type so this method doesn't cause any harm as long as you dry it completely, and keep the phone body well away from your work area (No kidding!- it was a huge mess!) If you have the leather back cover, you'll need to take extra care in the removal process if your factory sticker is as stubborn as mine was! In either event the SlimPWRpatch is well worth the money and brief installation time, and I'm happy to recommend it.

Went kaput in less than a month (purchsed 12/19; died 1/18). Worked great then suddenly stopped working at all. The charger stand I got is working fine so I know it isn't that. I have changed literally nothing since the initial install. I even double-checked several times today and no dice.

I have purchased a few different versions of this brand (SlimPWRpatch) over the years for many different phones. I've never had a problem until now. It worked fine for a couple of months in a brand new back (I used the one from the LG promo so I wouldn't void the warranty on the original case). However, NFC then stopped functioning, which is really bad considering I use a Yubikey as part of a multifactor authentication for a password manager. At first I thought it might be the phone, but I swapped back in the original cover and NFC worked fine with that, so it was definitely this patch. Qi charging still worked without issue, so it was pretty odd. I ended up buying a different Qi receiver patch (NeWisdom one) that came with a protective sticker that matches more of the OEM back and it has been working fine with NFC and Qi charging for now.

After buying the LG G4 circle case, I wanted to try this patch just because you can no longer use certain protective covers with the circle case. So, I watched the videos about this product and saw how easy it looked to install it. Then, I bought it to try it out. I watched the video one more time and then went about removing the OEM NFC backing. I installed this just as prescribed in the video, and it worked the first time out. I now have it permanently installed on my LG G4. I'm using it with the Soundbot wireless charger and it charges fine. If you have a LG G4 and you want wirless charging, then this is a great option. I highly recommend this.Note: I haven't tried the NFC yet. I will update this accordingly if the NFC doesn't work. Otherwise, you can assume that it does work.June 10, 2018 update- the NFC works great. Great option.

I have an extra original cover as reference, so I can say that with 100% confidence. The installation video is also a bit misleading since I had to literally scrub off the copper NFC antenna with sandpaper since it was glued with cyanoacrylate or something equally strong.Think twice (or even thrice) before ordering this thing. It is not as easy to apply as they want you to believe and NFC functionality doesn't seem to work at all.UPDATE: As of today (March 16, 2018) it stopped working. No wireless charging, no NFC, nothing. It is dead. Very disappointing. Changing three stars to one.

It was fairly straight forward and easy to install. Worked right away with NFC and Qi charging without any difficulty. I recommend watching the video for installation, and testing it before final application. It is thicker than the sticker that comes on the back cover originally but the back does still snap in place.

I was skeptical at first, but it works quite well. It was not as easy to install as the video lets on, seeing how the NFC sticker on my phone's cover refused to peel off in one continuous piece, but the included "guitar" pick was a lifesaver. It was extremely useful in cleaning up the residue. The sticker itself is not as robust as I would like, but we'll see how long it holds up.TIP: Use the included pick instead of a pocketknife or screwdriver to remove the sticker and sticker residue so you don't scratch the cover. Deep gouges could interfere with the new sticker's adhesion.

Did ton's of research. Yes, you can buy it cheaper on ebay. But installation is so much easier with this one. You can watch all the videos you want on competing companies to see how they make it seem so simple to align and use their QI patch. Well keep in mind, they have been doing it over and over again, hence they make it look easy. I paid a little extra because I didn't want to misalign and hence ruin a QI antenna. NFC charger works great too. It's one time investment if you put it on right, you put it on wrong, you will be frustrated and have to possibly get another one.

Il prodotto funziona bene ed é di semplice installazione (seguendo il video segnalato [...]).Consiglio vivamente di:1) posizionare il prodotto con attenzione e di testarlo accuratamente prima di procedere al fissaggio finale (verificare che sul lock screen [o sullo stato della batteria] che la dicitura charging rimanga fissa)2) dopo aver terminato il fissaggio, rimuovere i due adesivi necessari per il posizionamento che, anche se non sembra, fanno spessore! Rimuovendoli il coperchio sarà più semplice da chiudere.Nota: all'interno del plico é esplicitamente segnalato che rimuovendo il sensore NFC del coperchio si perde la copertura della garanzia. Personalmente, ho provveduto ad acquistare un coperchio secondario.

Of no use waste of money

Le produit fonctionne très bien. La vidéo explique comment faire: il suffit de retirer la connectique existante et le scotch très délicatement puis de la remplacer par le nouveau patch qui est très facilement installé grâce aux petits autocollants fournis. Tout est très bien pensé, il suffit juste d'être minutieux et très légèrement bricoleur ;-)C'est super de pouvoir recharger mon LG G4 sans fil.The product works very well. The video explains how: simply remove the existing connections and the tape very gently and then replace it with the new patch that is easily installed thanks to small stickers provided. Everything is very well thought out, you just have to be thorough and very slightly handyman ;-)It's great to recharge my LG G4 wireless.

It's ace is this, bit of a fiddle to remove the original sticker from the back of a standard G4 case even with the included guitar pick, but really good common sense instructions and approach to fitting this wireless patch. Just make sure you take your and don't rush. I will suggest already having a Qi charger before fitting this as you need to be able to test alignment of the contacts before sticking it down (it comes with a 3M sticker already attached). Overall it works very well, it is a bit thicker than the original sticker and I had to remove some tabs on my leather case so it wasn't hindering the use of the volume down button. The ceramic case doesn't have these tabs on it for some reason.

La verdad es que he tenido otras bobinas de carga para otros teléfonos, y la presentación e instrucciones de instalación son inmejorables.- Colocación a la primera.- Carga según lo previsto. (ya sabemos que son lentas y hay que colocar el teléfono con cierta habilidad en una determinada posición del cargador)- No abulta apenas en la tapa posterior.Da cierta "cosa" arrancar la antena NFC de fábrica de la tapa para poner este modulo (que hace las veces de NFC también), pero vamos, está asumido.....Lo que sí te cuestionas son las razones que haya podido tener LG para haber quitado esta funcionalidad respecto al G3.Como compre el modelo con tapa de cuero, y viene otra tapa en la caja, no creo que lo de la anulación de la garantía sea un problema llegado el caso......En resumen, por el precio vale la pena, sobre todo porque tengo cinco cargadores inalámbricos repartidos por la casa y el coche....Salu2