Oregon 105670 Replacement Guide Bar and Chainsaw Chain Combo, 18-Inch, Fits Stihl, Grey

Works great, but I had to do some research to make sure I got the right bar type for my saw. Much cheaper and comes with a chain which is working great. Will buy again.

Fits the saw it was purchased for and works great. I’ve always been a Oregon fan. High quality products

I haven't bought a stihl bar in years. These are just great value and a real workhorse.

I needed to replace my chainsaw bar for my Stihl farm boss 290. The bar fits perfectly, and works as expected but the included chain was a safety chain, which I did not expect.

This fits perfectly on my MS261CM. It would work perfectly on my 290 AND my 271 if I still had them.A little background.The day I bought my 290 and my 271, my 290 came with a 3/8 bar and chain but the 271 came with a .325! I asked our local Stihl dealer if they could convert the new 271 to 3/8 so both my saws will be set up the same for obvious reasons. They said yes and it was for FREE, included in the price of the 271. Both saws worked wonderfully for years until 1 day my shoulder (both) started hurting when I started the chainsaws cold. Arthritis sucks and so does being 75 a little. Anyhow my cure was to buy a "PRO" model chainsaw! If you have shoulder problems like i do you may want to do what I did?I went to the local Stihl dealership again and bought a MS261CM. If you have a 290 or a 310 or a 271 and you pick up a 261cm and use it for, i want to say just 10 minutes, you wont go back to your other Stihls. SO I sold my 290 and 271 Stihls to a couple guys without shoulder problems. BOTH of them very very happy!Those 4 models of Stihl chainsaws that i talked about can be converted back and forth in about 2 minutes from 3/8 to .325. The Bar, The Chain and the engine sprocket are the only difference between the 2.My 261cm came with a .325, .063, 81 drive links, 20" bar and chain and engine sprocket. I wondered how that would work so I kept the saw with the .325. It makes a narrower cut and removes a little less wood and so far the .325 chains do not dull any faster then the 3/8. From time to time while cutting 20" or bigger rounds in wet cottonwood or alder I noticed my front tip sprocket making steam using the original .325-20" Stihl bar. I thought maybe my chain oiling system had a problem but NO, not the problem. The front sprocket was just working too hard and it was getting hot. I spit and it sizzled. I then wondered if my Stihl front sprocket had run out of grease? THERE IS NO WAY TO TELL!I bought this wonderful Oregon 20" .325 replacement bar and chain combo and it fits and works perfectly on my MS261CM. It would work perfectly on the other 3 Stihl chainsaws that I talked about. This bar has the little grease holes on the front sprocket and I keep the little pusher type grease gun with me when I'm cutting and i use it every 15-20 minutes or so. I got the little pusher grease gun right here on Amazon.I have read a lot of reviews about this bar&chain combo. I saw some people said It doesn't work on their chainsaw. I think I saw a 290 owner and a 271 owner mention that. If your chainsaw has the 3/8 bar and chain it will ALSO have a 3/8 engine sprocket. You must have a .325 engine sprocket for this bar to work. When you buy this wonderful Oregon bar you need to set it right next to your current bar and compare, see if all the numbers match! 20"? .325? .063? 81 Drive links? YA GOTTA HAVE ALL 4 OF THOSE NUMBERS MATCH BEFORE YOU ORDER THIS!I love Oregon products. My other MS170 saw has an Oregon bar. I wish Stihl had the option of coming with an Oregon Bar and chain from the factory.Ya know what I did? I went and priced my exact factory supplied Stihl 20", 81 drive links, .325 .063 bar WITHOUT A CHAIN! Amazon sold me this BAR AND A BRAND NEW CHAIN INCLUDED for a less than the Stihl bar all by itself.I would recommend this to my friends only they use 3/8. (but they ALL use Oregon bars)

It didn't fit my stihl but it fit my Salem master and so far has been good.

I bought this bar and chain for my 271 bc the 20 inch bar was a bit much for brush cutting. I use this to log up average sized trees as well. Honestly I haven't had a reason to put the 20 inch bar and chain back on. It'd a wider cut and at times a faster cut. I've used oregon chains for a long time I swear by them tbh. This is my first bar from them but I've heard good things about their bars. Their full chizzle chains are better than stihls chains. So obviously their doing something right

I made sure all measurements were in place and ordered a replacement bar and chain for my Stihl MS250C 18" Bar. I was assured this would fit by information on Amazon. I finally got around to putting the bar and chain on...and found out, NO, it doesn't fit. I can't recommend this seller. I'm past the replacement date (that is my fault) but to mislead is wrong. I won't be back

Happy with the bar and chain, cuts well and fits my ms261 saw. This is the second one I’ve bought from Amazon. The first one lasted about six face cords of wood before getting noisy from chain wear in the channel. Lots of oil but not enough transfer to the channel.

Pour faire mon bois de chauffage

It's nice quality

The product was used completely blunt.

Pairs well with my Stihl ms261. Good quality