How to use the satellite finder?Step 1: Connect the "satellite" to the antenna tuner side and connect the "Receiver" port on the other side to the receiver and turn on the receiver and the TV.Step 2: After the receiver is turned on, the voltage supplied from the receiver is 13-18V. Check that the star instrument is on and the lamp is on.Step 3: Set the data (including local oscillator frequency, downlink frequency, symbol rate, polarization, etc.) of the star to be received in the receiver and turn on the signal strength and signal quality cursor status.Step 4: Adjust the knob on the side of the finder counterclockwise to the maximum (otherwise the signal will always be 0%).Step 5: Adjust the antenna azimuth and elevation angle, LCD display 99%, adjust the side of the knob, so that part of the received signal attenuation, and then adjust the antenna azimuth, elevation and LNB polarization angle, repeated several times until The signal is no longer increased.Step 6: Combine the satellite receiver to determine whether the signal is the desired star signal. If it is, remove the finder and reconnect the receiver to the LNB. If the received signal is not the desired star signal, repeat the above work.Please Note: Between the tall buildings or strong interference zone on the star, looking for the instrument will be caused by the whistle and cause the LCD display figures.Product Specification:Input Level Range: - 40 to -10 dBmImpedance: 75Gain: ≥10dBPower Supply: 13-18V DCOperating Temperature: 0-40℃Package Includes:1 x TV signal finder meterPackage Including.
Trustpilot
5 days ago
1 month ago
