2.5" leveling kit

Great product. The stance on my truck is awesome. Recommend highlighting that it is recommended to also install an alignment caster/camber kit so the alignment is done right and the front end remains aligned after the first bump. You'll enjoy the leveling kit much more when you avoid alignment issues.

Great product for the money. If I were to do it again I would get the 2" instead of the 2.5" for the fact that my truck has the baby-boost engine (2.7) so i think i got more height out of it than planned. Unloaded the truck looks great! Pulling the big boat it squats pretty bad. I plan to add a camper shell and gear during duck season this year and will add a spacer to the rear to compensate the weight so there isn't a lot of squat. Install was simple if you've ever worked on anything with an independent suspension. I did have trouble getting the strut out and back in even after taking extra stuff off and loosening the lower a arm. One thing to note when putting on the spacer, the spacer has a little wiggle around the bolts so don't tighten one side up more than the other (which you shouldn't anyway). Snugg them down equally. Ride quality is about the same. The only time I notice a difference is hitting pot holes in the road. Running stock tires for now, September or October I'll go to a 275/70r18 tire which will make it look just right

Well where do I start. After doing extensive research I bought the Motofab 2.5” level kit for my 2019 F-150 XLT Supercrew cab. A Ford dealership was going to charge $1250 for a front level kit installed. A 3rd party garage was asking $850 with me supplying the parts. I phoned a friend (master mechanic with over 30 years experience). It took us 3 hours to install even after reading instructions and watching the video’s. Pretty straight forward but had it’s challenges. Passenger side was easier than the driver’s side. The big issue is all the brake lines and ABS wiring. You have to disconnect wiring all the way up and try not to pop a fluid line. The kit itself is super easy to fit to the struts. It’s the take out and install that’s a challenge. The look of the truck is now awesome. Money well spent. The Motofab kit is quality material and worth every penny. I saved $1000 doing this with a friend.

I originally spent $6k on an Icon Dynamics full suspension kit that had adjustable height coilovers with high speed and low speed compression on the front and rear shocks along with their billet upper control arm. Wow what a freaking joke that was. On their softest settings they rode worse than a 1 ton truck! All that to say these leveling pucks are the way to go! 2.5” is a little high for the CV axels, factory upped control arms, and tie rods, however it pretty much completely levels out my 2025 F-150 Platinum Plus 4x4 PowerBoost, it’s about 1/4” higher in the front. I’m running 295/55R22 Toyo Open Country AT3s on the OEM 22”x 8.5” +44 wheel with zero rubbing anywhere. I may end up ordering a set of 1/4” spacers for the front because it appears the rears stick out a bit further than the fronts. The tires do get close to the UCA at full lock but nothing I’m concerned about, plus with the spacers installed it’ll give it even more clearance. My biggest complaint with these are the lack of studs in the puck. Instead of using studs to mount the puck to the frame like the OEM strut, they supply allen head bolts. The issue with these is there is no room to put an allen wrench in the bolts on the passenger side of the PowerBoosts. There are brackets that are mounted to the inside of the frame that hold high voltage cables right on top of the strut housing. The bracket isn’t easily unbolted so the only thing you can do is slightly bend it out of the way and use a flex head ratchet wrench to get the OEM nuts off. So instead of using the supplied allen bolts I opted to use some Grade 8 hex head bolts and tightened them using a flex head ratchet wrench with ease. Overall this kit works well, time will tell how it affects the suspension components but that’s not the fault of the puck. If your truck is primary a pavement princess like mine, don’t go all out on a new suspension, just buy this!!! Also, never do business with Icon! I’m now stuck with this kit as they don’t accept returns!!!!

The overall quality seems good, especially for the price. My overall ride quality was effected, it is a little more stiff, but less than I had expected. I was able to fit 34.6" X 11.5" wide tires on +12mm offset wheels without any trimming or rubbing. The install went alright. They say it can be done without a spring compressor, which is true, but it would definitely be easier with one. Fitment of the strut on the install is tight. My only gripe is the bolts that fasten the strut spacer to the strut mount. They are socket head hex bolts, but they should really be flange head, or at least include washers. If you install this with the supplied bolts you ABSOLUTELY need washers beneath, the supplied bolt head is barely larger than the strut mount holes. It is an accident waiting to happen.

Son buenos sacan bastante!

Product is difficult to install by yourself but it is doable. Make sure to have 21 inch and 18 inch deep sockets. When installing leveling kit make sure to have a 17mm deep sockets but the chrome ones. There is not a lot of room to tighten down bolts to strut. Also purchase a set of ratchet wrenches. Makes removing and installing the strut much easier. You will need to change the orientation of the bottom strut bolts. Strut has to be turned 180 degrees in order to install. I removed top 3 bolts and pulled strut out. I then used bottom bolt as leverage and pulled it towards me until the bolts change direction. Remove strut completely and then re install. It helps to have somebody with you or be creative and use pry bars and just brute strength to reinstall. It is a bit of a pain in the ass. I installed in my garage and it took about 4 hours.

Made in America without the high price tag. Installed in a little over an hour. Easy to follow instructions but also very straightforward. Front end sat about half an inch higher at first but settled to exactly level after about a mile of driving.

Just installed these on my 2021 f150.Very easy install if you remove your bottom strut bolts for reinstallation.Put a bit of heat on the press in bolts and tap them out.Measuring from the centre of my wheel up to the fender I ended up with 25 1/2” rear and 24 3/4” front . Very happy with the results.I also installed the bracket and nut to assir in the camber adjustment

Definitely good quality, For the price it’s definitely worth doing . Love the look , did lots of research and 2.5 is the max level you want to do without issues

Great product

Put this on my 2017 f150 5.0 with 285 75 17s and she sits nice. Almost dead level.

Product looks like its been used already... the box its like if its been opened multiple times its all destroyed and there is tape all around thats not too bad. The pucks have scratches on them and the bolts and also the bag is full of oil. Not very happy about it...