Loom Solar Panel 20W-12V for Home Lighting System, DIY Projects, Small Battery Charging(7Ah)| Pack of 1 | Max. Current - 1.04 amps & Max. Voltage - 19.25 Volts, Performance Warranty 25 Years

Best 600 watt solar panel arrived in good condition with best packaging.Working well as per said parameters.

Afraid while buying this but now happy becoz I had a solar fan with 20W panel from past 10 years which now was lower power proving becoz it’s not mono so brought this for this which I’m using now for router with dc to ac inverter and it’s only providing 2.08amps at peak sun at 1 Oclock let’s see how its performs.

Very good product

I bought Loom Solar 2 *375W Solar panels from Amazon for Rs 21500 (28.6Rs/W) during the Sale in October.Normally the panels is sold for 25K but during sale it was 23K and with 1500 off on Card offers.The price is great for Mono PERC.The panels were delevered witin 7 days which pretty good for rural location.The post will be a little longer ☺️(appologies).I have been using the system for more than 6 months so I think its a good time to write a review. Its has generated over 500Units according to my Solar Charge Controller.System Overview:I installed the system with Smartren Prime+ 30A MPPT Solar charge controller, Luminous 2KVA Cruze+ Inverter (24V) and 2 * Luminous 160Ah Tall Tubular battery.Review:I installed the system at my Village home at Paschim Medinipur, WB.I mounted the system with my father on the stairs roof which have an angle of arroud 35°. According to my location a angle of 15 to 20 degree would have been best for fixed array.I use the system as off grid system without connecting to mains as the inverter uses avg of 40W while doing nothing and the battery is also fully charged (Ideal Consumption), which is arround 1 unit (Rs 6 additional) per day.I switch to mains during night. (A bit manual work but I prefer the control).I have seen a maximum output of arround 600W from the panel to the Battery.I wanted to go with Ashapower charge controller but were not deliverable to my location, which has better tracking of MPPT and better efficiency.During day with good sun🌞, it produces like 14-16A from panels and 22-23A to battery. But avg battery charge current is arround 18A.Under cloudy weather panels produces around 100-150W to battery.During day it easily runs 2 fans(75W each), 1 TV(75W) 1 Fridge(110W), washing Machine (270W), Air Cooler(175W).Form 9AM to 4PM I use continuous a load of 200-400W directly from Solar.I can even run 1.1KW submersible pump during emergency. Power cuts and low voltage in Village which is common.My system can easily run my Induction which uses 1200W. (I usually avoid these loads with my other loads as it can overload my Inverter).The system generates 3-3.5 units per day under good sun.I am happy with the system but I see some QC issue with the panel out of the 2 panels cells of one panel is deep blue (close to black) but the other one is having some cells which are little light deep blue in colour.And the sillicone seal which is applied to seal the panel with the aluminium frame is not applied properly.But overall the system is awesome.And now Loom Solar have launched 390W (Rs15K per panel) Mono PERC and Shark 440W (Rs18K per panel) half cut cell panels but they seems bit expensive then the older 375W panel (Rs 13K).

Dispointment from loom solar,Very bad performance.My previous 10watt panel works better than this.

Good product

Rating: ★★☆☆☆ (2/5)I bought this 20W 12V solar panel for a DIY project, and while it does deliver the expected 12V output, I was disappointed with the condition it arrived in. Some of the cells were already broken when I received it, which was a letdown. It looks like it might have been handled roughly during shipping or poorly packaged.The panel still works, and the 12V output is steady enough for my project, but I can't ignore the fact that it arrived damaged. If you're planning to use this for any kind of serious installation or outdoor project, I wouldn't recommend it due to its fragility. However, if you're working on a simple DIY project and don't mind a bit of damage, it can get the job done.Just be prepared for the possibility of some broken cells and poor packaging.

I made the shoping twice. V good panel. It is giving good results. Without a second thought go for it.