Legrand Wiremold CDB-5 Corduct 5 Foot Cord Cover for Floors, Holds 1 Cord or Cable, Brown (1 Pack)

As many reviews have stated the product comes tightly rolled in the box so will not lay flat when you get it - but this is very easily remedied by rolling opposite direction then putting back in box overnight. It still had some rolling at the ends as a couple reviews have stated - this is how I addressed that and it works very well: Used my heat gun being VERY CAREFUL to not overheat and melt the cord protector. Got it very warm and pliable like a wet spaghetti noodle, focusing on the curled ends. Kept the heat gun always moving so it would not burn or melt any spot. Then laid it flat on my garage floor (didn't want to heat my finished wood floor) and allowed it to cool perfectly flat. It now lies flat and straight even at the ends. The dimensions are as advertised, length, width, height and channel. Easily accepted a 14 gauge power strip cord - but am certain this is the largest cord it will accept. If smaller interior extension cords, you could probably get 2 in without any problem, maybe 3? It looks MUCH better on my wood floor than just a slinky extension cord. The cord is also well-protected. A good solution for running permanent wiring to one of my end tables that sits away from any wall. I did not use the adhesive tape as I don't want that on my wood. But I did keep the tape roll to use for some other project at some time. Very happy with he purchase for price, shipping, quality and function. I would buy this again and I do recommend it.

I saw this in a few other reviews... and I only looked at a few other reviews. So, common problem.These come rolled up, and the material wants to stay that way. I placed it down on laminate, used the double sided tape and weighed down the corners and it still pulled up.It will flatten out eventually. What I would recommend - if you have the time - is flattening this out somewhere for an extend period of time (like a week or two) before putting it in place. I bought a second one for a different purpose and I have the legs of a couple of chairs on top of it to keep it flat.

All these reviews talking about trying to get this to lay flat can be ignored. When you receive the box it will be tightly rolled. Place the roll in a large pan, cover with water, and boil it for about 5 minutes. Take it out of the boiling water and lay on a flat surface to cool. It will now be perfectly flat! Trust me, it’s worth the time; just be sure to let it cool completely.

Aside from the tape this is solid and quality. However when it comes to actually using it, the tape is awful. It doesn't stick to the back of the cable protector if it starts to pull up and sticks to the floor so badly that removing it leaves residue on your fingers, but more significantly, on your floor which is the worst to try to clean up. If you're going to buy this, save your floors as I would strongly recommend using your own adhesive tape.

I put the cord in it and laid it on a tile floor. It works as intended. It was a little challenging to get the cord in place in the channel. Also it comes in a roll and did not want to lay flat. I used my hairdryer to heat it up and it softened and laid down about 90%. One area did raise back up slightly. I’m gonna try putting the hairdryer on it again, and see if it will relax and lay flat finally. I would buy it again if I needed one. And I would try softening it with a hairdryer before putting the cable in, That might make it easier. Sturdy.

I had to wrestle with it a bit to get it flat enough because it is shipped coiled up and it is a strong material that wants to stay the way it is used to being. But once you get it flatted out, it's great. Holds the cord tight. and is just the right length for where I put it.

I feel it is not a great enough adhesive to adhere to carpet

The main function we purchased this cord cover for was to keep people from tripping on an electrical cord running across our wood floor. The cover arrived coiled into a circle in its packaging. Despite trying to get it to lay flat and adhere to the floor, a 4" strip at the end of the cover has continued to come unattached to its adhesive (trying to wind up again) and create a trip hazard. After placing ten pound weights on the 4" segment for days at a time, the cover continues to come up from the floor and create a hazard.

Produto de péssima qualidade, pouco maleável, não adere à superfície com a cola enviada e ainda por cima vem com um alerta mal explicado de que provoca câncer. NÃO RECOMENDO.

Love the concept, cords fit well but having trouble getting one of the pieces to stick down properly to wooden floor

The double sided tape provided is not strong enough. The end of the cable protector all cove off the floor within a day

Works perfectly. Used a heat gun to make it lay flat.

I have been quite disappointed with this product, it was wound so tightly in the box it came in it won't lay flat no matter what I do