Color:Holographic Green INSTRUCTION 1. Create your own design / pattern on the computer 2. Adjust proper blade depth and cutting pressure. 3. Cut with the gloss side facing DOWN and the duller back of the vinyl facing up. 4. Weed away the excess vinyl, leaving your design on the carrier sheet. 5. Apply the design to your T-shirt with heat press at 300-320℉ for 10-15 seconds (if you use a home iron, press it with firm pressure). 6. Wait for the vinyl to cool and gently peel off backing after few minutes. Attention: Don't use steam in the iron Don't iron directly on transferred image after it has been applied to the garment * Recommendation: DO A TEST CUT BEFORE YOU BEGIN YOUR PROJECT Washing : Wait 24 hours before first washing Turn garment inside out and machine wash cold separately from other clothes Use color-safe detergent and remove promptly from the washer Do not use bleach Tumble dry low with garment turned inside out
D**.
Weeding issues are not product related...Read!!
Perfect once you figure out your cut depth!!! I am new to this, just purchased a Cricut Explore Air 2. The first one I cut out was a pain to weed as I set it on the basic iron-on setting. This priduct needs to be on the iron-on+ cut setting. Once I did this there were NO issues with weeding at all and this was a very intricate pattern. Will buy again definately!
A**C
Very pretty.
Your browser does not support HTML5 video. Ok so this is very pretty. If you use a cricut make sure you set the dial on card stock. Otherwise it wont cut deep enough. Besides that my heat press did it at 320 for 15sec. Came out nice!!
K**N
Beautiful results, a little hard to weed!
I loved how I had plenty of the item to make mistakes on because I made a few, but once I perfected my technique, I was able to pull off my design. I wanted a certain magical school crest to match some cute little shirts we found in small sizes but not adult sizes. It IS really difficult to weed, but if you are careful and use a sharp pair of scissors, there will be a pretty sharp result! (I worked in a sign shop for a year during art school so I know what easy to weed vinyl is...)
K**1
What’s all the fuss about??
Read reviews and decided to take a risk. I just bought a ScanNCut and this was my first time cutting and transferring. I don’t understand all the negative feedback about weeding?? Yes, it is a very different material from other htv, but if you roll the film and pickup the pieces with fingernail, it is actually easier and much faster to weed! It is so beautiful! I am only concerned at how durable it will be in the wash. Will it hold up? I’ll update when I get there. But as of now, I am very happy with my purchase. (And even though today was my first time using my machine, I had first used Siser htv for my first cut. So I do realize the difference in material and weeding process)
M**N
good vinyl for a good price
Your browser does not support HTML5 video. I liked this vinyl. It was delivered on time (maybe even a day early). They were rolled in individual 5 ft x 12" rolls that were individually covered as well . There was no damage to the vinyl from shipping and it was not peeling up at corners. It was easy to weed, but seeing how everyone's opinion is different on what constitutes "easy to weed", I am trying to upload a video so everyone can see the way it actually weeds. I didn't have any trouble using this vinyl and have no issues regarding it. Overall, it is very good vinyl for a very good price. I bought 3 rolls the first time around and will be ordering more.
M**W
Insert loud, blaring warning alarm here
Do NOTDo NOTDo NOTBuy.Mama always said actions speak louder than words, but how about a photo?This peeled off... The color came off... And the entire shirt was RUINED. It was for my MOM. Sad face. I'm so upset.I'm way past the return window, it's my stupid mistake to not have experimented with the 3 holographic ones I ordered as soon as they came in. Holographic HTV is just DREADFUL. Stay AWAY from it.
K**.
Pain in the A to weed!!
I was really excited to use this vinyl for my project but wasted a ton of material playing with the cutting depth just to have a hope of weeding it. I was able to weed it after using my Cricut at a "poster board" cutting depth and even then the weeding was extremely difficult and the foil tore so easily it was useless for my purpose. To be fair I didn't test how it looked/ease of transfer after weeding--could be a beautiful option if you plan to hand cut your shapes. I also bought the holographic linked below and highly recommend it over this inferior item.https://www.amazon.com/gp/product/B079N2VCJG/ref=ppx_yo_dt_b_asin_title_o03__o00_s00?ie=UTF8&psc=1
M**I
This is very pretty and works great if you know the settings.
Your browser does not support HTML5 video. So I read all the reviews. I still bought it because it was what I needed for this costume.First someone in the comments said to use holographic sparkle iron on as the setting for cricut. It worked perfectly I did not have to use extra pressure. You need to do a small test on your machine.Second the weaving is not like normal HTV it is more like a sticker. You need to peel it. Once you stop using weeding tool and start just pealing it the weeding is rather easy.The color is truly stunning. I am very pleased. It was easy to heat set and peeled off fine with on issue. I wish there where instructions but thanks to the reviews it helped a lot. I will not be machine washing this. The satin material can not be machine washed. So I don’t know if it will hold up on the was. I would recommend! Just make sure to test it and remember to peel not weave and you will be fine.
Trustpilot
4 days ago
3 days ago
