B450M-HDV R4.0 AMD B450 AM4 Socket Ryzen 2000 - 5000 Processors DDR4 3200 64GB HDMI DVI-D D-Sub Motherboard SATA 6Gb/s Micro ATX M.2

I had a prior build since early 2020, with an Antec PSU that shorted out recently and died with a bang, and in the process killed the motherboard (MSI). Fortunately, my M.2 NVMe Intel disc (with Windows 11 Pro) was intact, and I did not know then about the CPU (Ryzen 5 3400G Picasso) or RAM (16GB Crucial Ballistix 8GBx2). Typically, a PSU outputs first to the MOBO and CPU, and next to the RAM. Older memories were notoriously susceptible to current and used to die with the MOBO. Fortunately, things have gotten better. Antec was great in sending me a new replacement PSU under warranty. I needed a new replacement MOBO and wanted to stick with AM4 chipset without spending a lot. I found this board on Amazon at a great price, and the several positive reviews were encouraging. Throughout the years, I had always used MSI boards for my builds, except once (ASUS). This was my first experience with ASRock, and I am very pleased so far. The box I received states "AMD Ryzen Desktop 2000 Ready" and had an added sticker "AMD Ryzen 5000 Desktop Ready", and another "Windows 11 Ready". I imagine some (older) stock did not have the added (Ryzen 5000) sticker, which would explain some reviewers who had to update the Bios using an earlier generation CPU. When I received it, I did a minimal basic build outside the case, with the new PSU and tested my old CPU and RAM. It booted into BIOS and I was so relieved that the CPU and RAM were fine. I then put the Intel NVMe disc, placed the board in the case, hooked my old Plextor DVDRW, case fans and all the headers. Windows 11 Pro loaded up and all is good. The Bios/set up on this ASRock board is very easy to navigate and has a lot of 'AUTO' settings in the default parameters, and I only had to change few things. For the technically savvy, there are several settings you can adjust, but for most people, you will only need the boot menu, particularly for Win 11, and very few advanced configurations. I did not even use the included support CD. The box contains the MOBO, CD, Installation guide, 2 SATA cables, a small M.2 screw and the I/O shield. The guide and illustrations are very adequate. It has 2 DIMM slots (288 pin) and supports up to 64GB, 32GBx2, per ASRock. I bought new 32GB RAM (16GBx2) which was easily recognized. ASRock states for Picasso, the frequency is 2667/2933, but the new memory is 3200 and runs as such, with or without XMP. I am not a gamer and never overclock a CPU and don't use a discrete GPU anymore. It has on board USB2 (x2) and USB3 headers. The CPU connector is only 4 pin and if you have an 8-pin cable (4+4), you just split it. The MOBO is the standard 24 pin. There are 2 chassis fan connectors (4 pin and 3 pin), 4 SATA connectors, HD audio and a standard front panel system header. There is one M.2 and 2 PCI slots. The I/O shield is as shown (Single PS2, but supports Y-splitter, 2 USB2, 4 USB3, Gigabit LAN, rear audio, VGA, DVI and HDMI). It is a basic board (No WIFI, BT, M-Flash, USB C) and is very well priced. As such, I would recommend as a budget motherboard. Even though I am biased toward MSI boards (I guess force of habit), I will definitely keep this motherboard in mind. Thank you.I bought a second one to upgrade an older computer (Athlon A6 APU and FM2+ socket MOBO). It also had the Ryzen 5000 and Windows 11 ready stickers. Very satisfied, just like the first time. Recommend. Thank you.

Great motherboard with great features. It has 64gb of memory capacity and will work great in an all black color schemed build. It was easy to install being the matx size and comes with usb 3.0 and 4.0 cables. It isnt too expensive and it has a great design with the black and gray. My only complaint is its lack of 5v 3pin connecters but you can't expect to find those on budget boards.

works out of box for r5 2400g .quality made

I give it 4 stars, only because the seller does not explain which processor would not be advisable to use, and from my experience and research that I have done, it is better to use it only with Ryzens 5 maximum

For the price, the board is excellent. It just works and it’s 5000 series ready

Muy buen artículo

I was initially attracted to this ASRock B550 motherboard because of the low price, but it ended up costing me way more in time and frustration. It wouldn’t post out of the box, even after I flashed the BIOS using a USB stick through the BIOS menu. I tried multiple CPUs—Ryzen 5 3600, 3600X, and 1600—with no success. Swapped RAM, rechecked everything, and wasted a ton of thermal paste in the process. Got a replacement board, and it had the same issues. As soon as I switched to a different brand, everything worked perfectly. The cheap price isn’t worth it if the product doesn’t work. Would not recommend.

Simply very good for the use of an average Gamer, I put an R5 4500 and a Gtx 1660S, 32gb ram 3200h and nothing to desire or envy