Color:Shielded CAT6/50PCS Custom ethernet cables made easier and handly -Simplifies twisted pair terminations by allowing the wires to be inserted through -the connector and out the front -Technician can easily verify the proper wiring order Reliable, compliant performance -Shielded Pass Through cat6 Connectors are fully RoSH, UL and FCC compliant and are suitable for use in category 6 data networks. -Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector -Reduces the distance between the wire twists and contacts improves performance They work with virtually every model of RJ45 crimper tool and 23AWG cable. Specification: Shielded RJ45 pass through Ethernet ends Using:special for Category 6 unshielded stranded cable and solid wire Hole Diameter:1.1MM Recommended best fit size for wire(Max Insulated wire OD): 1.00-1.06MM IMPORTANT NOTE: 1.Please straighten the wires and cut it neatly so that pass throught easier 2.Please select suitable connector (If cable diameter is smaller than recommended size, when the cable is crimped, the cable will be biased,resulting in fail. If cable diameter is bigger than recommended size,it can be difficult to pass through.) 3.Please check that individual wire and connector's metal contacts are close contact if cables you made with these connectors failed connection tests. 4.If pins were not completely depressed,please note crimper and the way of using crimper.★Please do not hesitate to contact us if you have any queries and issues.We are here to help you until you satisfaction.
Y**⭐
Buy these coz they're Guided, 3 prone gold plated, sturdy connectors
I have been wiring networks here and there for many years, and just finally figured these out thanks to whoever invented these, these just made wiring and basically life easier, and just gives you no chance to make any mistakes on wiring. I have purchased these first time to try for my small business Network system setup, and I literally got the job done half the time I supposed to get it done for.Greatly appreciated ease of useWell made sturdy plastic3 prone gold plated contact tipsPass through rj45 modularEconomicZero failure chanceLatch is quality, doesn't breakGuided paas through channel makes it much more easier.I Would definitely recommend these connectors when considered price and quality. Buy these without hesitation. I have searched for hours, these have the best price and best quality.NOTE FOR THE SELLER/MANUFACTURER: WIRING SCHEME YOU HAVE ON LABEL 568A IS CORRECT BUT 568B IS SAME ON THE LABEL WITH 568A, LABEL NEEDS CORRECTION 👍
B**Z
Consistent fail on pins 4 and 5 (update to 5 starts)
I’ve put on many rj45 connectors and these consistently fail... well about every 5th one works.. pins 4 and 5 are the problems. I don’t recommend.Update 4/12/19: Amazon seems to have lost my update to the review of this item. Customer service was great. They contacted me and sent me another batch of RJ45 connectors and they work great. I highly recommend this seller.
D**R
Good connectors
I thought I could use my stardard crimper on feed through connectors and trim by hand. Wrong! In order for the connectors to seat properly in its recepticle, the wires must be trimmed flush with the body of the connector. See picture of not being trimed enough.
S**U
Very difficult for Cat6 shielded
These connectors do come with load bars, no guides, and can barely fit 8 conductors of a Cat 6 shielded wire. Also the color code for T568B is actually T568A
F**Z
DO NOT BUY! DAMAGES Ethernet jacks!!
These are poorly designed connectors!The dimensions are too large to fit into normal Ethernet ports.The connectors force the pins of the receiving port to lose their spring ability and make the port UN-usable.As I write this review I am using my damaged laptop with a USB to Ethernet adapter so that I can connect to the internet again! I have no Idea whet they were thinking making the dimensions too large. This should never have happened.A shielded jack with pass through wire assembly is a great idea. Their implementation is a total failure!!
R**Y
JUNK!!! DOES NOT FIT IN NETWORK PORT
These do not fit in standard network port.
H**N
Why so cheap, coz really bad quality!!
These cat6 connectors are terrible and I won't buy it again. Impossible to use. The fact that one must have the wires perfectly straight is counter productive to what they were supposed to do. I had too many of these fail. Never again. Don't waste your money.
H**Y
Defective&Bad
I wish it worked, but it's frustrating.10 out of 10 of the cables I made with these connectors failed connection tests！Not all pins were completely depressed, or went crooked, making an unusable connection. You are going to lost so much time and money! Won't buy it again.
Trustpilot
1 week ago
2 months ago
