Power Stop K2822 Front and Rear Z23 Carbon Fiber Brake Pads with Drilled and Slotted Brake Rotors Brake Kit For Lexus ES350 Toyota Avalon Camry

At first Powerstop didn’t send the front pads. I called the company and they sent them. The rotors are in great shape and work great! I put them on my 2009 Camry LE and fit like a glove. Be sure to use brake cleaner, copper anti seize, thread lock, silicone lube and a torque wrench where and when needed! Also, make sure you use a dial indicator (mine is a $31 magnetic Industrial Tool) to test for any rotor runout before putting the caliper bracket on. One of my rotors was 5/1000” (maximum is 2/1000”) off so I had to take my rotor back off and realized I had missed a bit of rust on the hub. As a final good note...this particular kit came with all the brake hardware as well.

The brake rotors were well made. The packaging and the labeling of each item was perfect. The brake pads were good. It was easy to install both products give it a five star.

I've purchased multiples of the powerstop line over the years and these are were a bit worse on the pads than I'm used to, but do perform well.the good: good braking force and only a little fade, but to most people they will feel very linear in brake performance and even when faded they brake as hard or better than the previous OEM ones . these should be a slight upgrade from OEM for most cars and has more braking force than stock. Just remember to set the pads with the heat up routine that is suggested by MFG.the bad:they will squeak a little bit when first starting out in the morning for some reason. ( definitely not the noise maker contacting the rotor) other than that they are pretty quiet.overall a good buy, but you will need to inspect the rotors when they arrive. the first set I got from amazon had been dropped and dented so badly they were scrap metal. the packaging from MFG should be much thicker for shipping.

For the price you can't beat it. Bought a complete set for our 08 Toyota Camry XLE V6. The car has always had issues with the front rotors warping. Using OEM rotors or aftermarket. Decided to take a shot on these. Kit came with everything you need. Install was trouble free. Everything fit properly. Follow the break in procedure! Car stops very well, especially from higher speeds. No noticeable brake dust build up on rims. Rotors look nice on the car. Will see how the longevity holds up.

I am completely thrilled with this Power Stop Kit. I was slightly worried when ordering because I haven't been happy with aftermarket parts and normally buy manufacturer OEM parts. However, this kit has everything to replace your brakes from the pads and rotors to new springs, clips, boots, and even high temperature brake grease. Everything fit perfectly like OEM. These brakes are super quiet, smooth, and stop better than OEM. The ONLY down side is the break-in process of making a number of aggressive stops and a number moderate stops in a short period of time without completely stopping in a neighborhood with lots of traffic.

Bought a set for a 2009 Camry XLE. Putting them on was a breeze, sort of, some of the shims had to be messed with to let them fit properly. I got the pin boots, the shims, pads and rotors replace all around, front and back, in about 4 hours. Drive great, stops great, solid product.

I'm a repeat customer, as this is the 2nd set I've purchased from this company over the last 3yrs. These were installed on a 2011 Camry and I've had them on there a few weeks so far. Installation was pretty much straight forward as usual, no issues there if you know what you're doing. I even followed the break in instructions to the T, as mentioned by manufacturer. Brakes are still really noisy now, couple hundred miles later. I can't even compare the quality of the first set I got from them 3yrs ago vs this one. It's for the same vehicle, but their quality has gone way down. Completely unacceptable, I'm almost tempted to remove the entire kit and send it back. I'll go through the hassle of doing all that because this kit is garbage and I don't want it on my wife's car. Waste of money and time. I'll probably just purchase a different kit from RockAuto and at a better price too. Save yourself a headache and your money, look elsewhere.If the seller reaches out to try and rectify the situation I'll update this review, otherwise this is what it is.

2007 lexus es350. Wifes car. Moved to a rural area in SoCal. Lots of hills. After a month, starting feeling alot of vibration in the brakes. Warped rotors from so much downhill braking. So I decided to upgrade. The price was right. Recived them in a timely matter. Pulled the wifes car in the garage. Had them installed in about an hour. Did the required break in. (Very important).Shes been driving the car a couple a months. No vibration. So much more of a solid pedal feel and stops on a dime. Excellent.