Cosmas 10 Pack 161-3ORB Oil Rubbed Bronze Cabinet Bar Handle Pull - 3" Inch (76mm) Hole Centers

Great product, better than I could have imagined, solid, weighty, good threads. Very happy with product. Good weight, nice patina/color, just like pics but better.

Doing a whole house remodel and these look and work great

Love the look of these. I had 6" installed on all cabinets in the kitchen and bathrooms. There was one odd narrow drawer that needed the small 3" size.

Love, love, love these handles!! They have a nice heavy weight to them and are a much better quality over the what the big Box Stores sell. I'm very glad I took the chance to try them out.I included a picture of the silver handles I installed 20 years ago and have hated since day one. As you can see, these oiled bronze handles are a major improvement and they are twice as heavy. Not sure why I waited 20 years to change them but I'm really happy I did. Don't think I could have found anything sooner that I like this well.Now to the only problem I had when I put them on. My dear sweet, percision minded husband gave me zero wiggle room with the holes he drilled originally 20 years ago. When I tried to install my first handle, they were just a smidge too long from center to center. I read on the box that they are 76mm and in our world we needed 75mm since that is 3". My heart sank thinking I would have to redrill with larger holes since I'm on the lazy side. Husband to the rescue: he discovered there is a set screw holding the handle to the screw stems and a 2mm hex key fit perfectly. All I had to do was break the screw loose and 1/2 a turn later, there was enough slack to install the handle on 3" handles without any problems. They installed nice and tight also, no looseness in any way.I also got the matching handles for some smaller drawers and they really complete the feel. An added bonus is no matter how nasty dirty the kitchen gets, I still have awesome handles and knobs that make me smile.

To complete the look of my new kitchen in my barndominium in Texas, I wanted pulls that had a Texan flair and of course were quality and solid. These pulls fit the bill on all three points and were priced right on Amazon! They enhanced my Home Depot basic shaker cabinets and completed the look I had envisioned! Even the guy who installed them was impressed at their weight and solidness and found them easy to install. NOTE: Depending on the depth of your drawers/cabinets, the screw included may not - I repeat - may not be long enough. I had to use 1.5” screws but that’s just because of my cabinets (see photos). Just bringing this up so you’re prepared ahead of time.

So we ordered 6 of these and will be using them as curtain ties-backs (yes, yes, I know these are cabinet knobs but the size and shape are perfect for what we wanted). In order to figure out how to mount a knob straight to a solid post, we had to see how this was put together. Obviously its pretty small so should be simple. Well, I here to say it is. See the our image of the piece taken apart for some idea.There are 4 parts, the rod, the rod holder (cabinet standoff), the set screw (little black screw) and the cabinet mounting screw (silver screw). First, we noticed that our cabinet screw only went in a 1/4"... that seemed odd. So we looked a little closer and saw the set screw. Well we took that out and voila... the rod fell out almost immediately. Looking a little closer we saw that the pin head of the set screw had missed the pre-drilled hole to sit in. There's a small dimple in our rod but it's covered by the handle collar. Reseating the set screw into the rod not only made the rod a little straighter but also allowed for the cabinet screw to go nearly all the way in (1/4" stuck out or so). So that's the rod... if your's isn't straight or seems really lose, check the set screw and it's positioning.Aside all that, we now know how we're going to mount the rod/knob to a post/wall where one can't get to the backside to use the cabinet screw. Simple solution... HANGER BOLTS They have a fine machine thread on one end and coarse wood thread on the other. Something like this  5/16'' -18 x 2'' Steel Hanger Bolts, 8 pack  Now I just need to find the right thread size and we're all set. I'll run to HomeDep0t to figure that out and and the size needed later for other peoples reference.edit:K, found the Hanger Bolt to match: 4317-E (20) - 8-32 x 2 Hanger BoltsAn Amazon Item that matches it:  8-32 x 2 Hanger Bolt (20 pieces) edit 2015-03-21:finally remembered to snap a couple photos of how we have our knobs mounted. Curtains aren't in the photos because we've got them in the wash... got a little wet during the winter months here in Washington Stateedit: 2016-05-11wanted to just add a couple of photos that show the knobs and how little they stick out compared to the surroundings...

I purchased the 10-pack for my bathroom remodel. They are very attractive, appear to be well made (mostly), and are easy to install. I would have given 5 stars but there were 2 issues: 1) the screws that came with the pulls were too short, but I had to go the the hardware store every 5 minutes anyway so it was no big deal, and 2) 2 of the 10 pulls had loose crossbars. I had to use superglue to stabilize the bar (on the back side so it wouldn't show) and I hope it holds.

I am very happy with this product

Excelente producto muy alta calidad.

muy buena calidad me encantaron!

Went well with wife's cabinet make over. Looks really good. Came in good time and good value

2 of the 15 were loose and garbage but the rest were good

Great product.