Brand: TOGU Material: 100% 1.0mm thickness Premium Grade-304 Stainless Steel Finish: Full Brushed Stainless Steel Total length: 450mm / 18 inches Cross-Section Specification: 25mm or 0.0.98inches Center-to-Center Mounting Distance: 300mm/11.81inches Attention: If you are purchasing new handles for the replacement of the old ones, please kindly measure the existing hole-to-hole Distance, the allowable tolerance is 300mm/11.81inches ¡À1mm/0.04inches. If you are not sure, please kindly consult us. Thank you! Applicable door thickness: 2 pieces of Backup 80mm Connection Spindle Screws make the 300mm/12inches Length Size works up to door thickness 55mm/2.165inches 2 pieces of Backup 80mm Connection Spindle Screws and 2 pieces of 100mm Connection Spindle Screws make the 450mm/18inches & 600mm/24inches & 900mm/36inches & 1200mm/ 48inches & 1500mm/ 60inches & 1800mm/ 71inches Length Size works up to door thickness 75mm/2.95inches If your door thickness is not in this thickness range, please kindly get in touch with us! We will try our best efforts to offer you a best solution! Steps for Installation: Drill and create two end to end holes diameter between 10mm-12mm/0.394-0.472 inches on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls. Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process.
Trustpilot
2 weeks ago
2 months ago