NoctuaNF-A14 FLX, Premium Quiet Fan, 3-Pin (140mm, Brown)

Noctua is the premier air-cooling manufacturer on the market. It won't get any better than this. I bought and installed these two years ago. They are so good at pushing and pulling air, that they rarely need any actual cleaning. I have a Cooler Master Cosmos 2 case, as well. So coupled with that, I rarely ever hit 40c on my CPU. In fact, it takes the hottest days of the year for my temp cases to get close to that. On average, with high load of multitasking and heavy gaming, my CPU temp stays around 33-38c, and in the winter about 27-33c. I've also had the fans running on max speed for a year straight (with power cycles of course), and sometimes with 48hrs+ of uptime. Still no wear and tear. I don't foresee myself ever buying another brand of cooling fans again. These things deliver results comparable with liquid cooling.That's not even the best part. These things are quieter than my desk fan! I was amazed at how quiet these fans are even on max speed setting. They're practically silent on low and medium speeds. You'll need a good case to take full advantage of these fans, but even in a terrible case, these will outperform any other fan on the market, especially for its price.

Many good things can be said about this fan. Since you can read those elsewhere, I will focus on my specific scenario.I bought this fan to replace a Cougar CF-V14HB 140 mm fan. That fan was purchased to replace the stock intake fan in my Lian Li case. The stock fan was an LED fan, so I never even considered using it.Anyway, everything I say here should be regarded with the caveat that the Cougar had less than 100 hours of use on it, and the Noctua is pretty much fresh out of the box. It's possible that the Cougar might have quieted down after a longer break-in period, since most of its noise seemed to be coming from the motor or bearing.I did a side-by-side comparison, and it was difficult for me to say which fan was louder (from distances between 0.1 to 0.5 meters). I will say that the Cougar seemed to have more motor or bearing noise, whereas the Noctua seemed to be emitting more noise from its fan blades. Also, the Cougar seemed slightly out-of-balance, when you hold it in your hand (with the power on). Both fans were run at full 12V (i.e. without any attenuator) and have similar airflow specs.While the amount of (upstream) noise was similar, I feel the character of the noise from the Noctua fan is more pleasant. It's a soft, whooshy hum, whereas the Cougar seemed to have a bit more whine and buzz to it. That sounds a bit harsh on the Cougar, which really isn't bad (especially when I got it at roughly half the price). But it was noticeable enough that I decided to take a chance and see if the Noctua fan was better. In hindsight, I'm not sorry I tried, but I don't think the improvement was worth the full price of the Noctua fan. But if I were starting over from square one, I'd buy the Noctua without a second thought.Finally, I just want to say that this fan is a little louder than I'd hoped. Since I don't know if my expectations were reasonable, I'm not going to deduct a star. Just be warned that this fan is definitely not silent, at full speed. And I bought it to run at full speed, since I also upgraded the exhaust fan and want to maintain the ratio to preserve a positive pressure configuration.

I bought this for an NZXT Source 210 case. I am using it in one of the top fan mounts. I primarily bought this fan because the advanced bearing allows mounting in any orientation with no problems. I was also interested in quiet operation and longevity. You can buy quiet fans with fluid bearings for cheaper or about the same price but honestly, superior cooling with good engineering and reliability is worth the price to me. I keep my computers until they wear out (generally) so expensive fans are not a waste of money for me. I love the cabling options. I have come to not be so fond of PWM fans and other methods of controlling fan speed. PWM doesn't always work right and it can be hard to get exactly the speed you want. With this Noctua, the low noise adapter was perfect. I cannot hear this fan over the other five fans in my case and it has brought every temperature reading I have down a few degrees. Anyway, I connected this to a molex from my PSU with the low noise adapter. It's a good thing it came with this adapter because I don't have an open fan port on my motherboard anyway. I would have had to buy a splitter anyway. In conclusion, as is it's reputation as a Noctua product, everything about this fan says quality. It feels like it's built to last. It's surprisingly heavy for a fan. The sleeving on the cables is high quality. I know I do not have to worry about this thing failing anytime soon.

Yes, these fans are fugly, my advice is to get over it and look at the performance. Noctua is a high performing fan and its whisper quiet, my rig's temps dropped by a full 11C after switching to 3 top mounted Noctua 120mm and a bottom 140mm compared to my previous fans' performance (and which were obnoxiously loud). If I crank the rpms higher I can get another 1-3C temp drop and they're still significantly quieter than my previous "performance" fans. Initially noise reduction is why I gave the Noctua a closer look, but after reading several critical reviews of their performance I decided to make the spend and see if it was worth it. Placement of fan and deciding on how you want to set your air pressure/flow is of course a important part of it all, but I was quite literally surprised at how well these performed while being so very quiet in the process.The fan came with silicon mounting pins which I decided not to use as I am more comfortable with simple machine screws, but the built in corner mounts do a great job of absorbing vibration all by themselves. It also came with 4 male/female wires to connect it to a fan controller or mobo pin, with 3 short and 1 long, I wound up using the long and 1 short to connect the fan to my mobo and it was of sufficient length to go behind the mobo plate. The wires are high quality and lock together snugly enough to where there's no worry of a loose connection, in short, these fans are worth every penny.

Replaced a fan that was vibrating. Used the original screws of the fan being replaced. This fan has a solid square shape which interferes with one of the thumbscrews for the side panel of the computer case (unlike the original fan which has a circular shape except for the areas containing the screw holes that protrude in an X shape from the circular shape). The thumbscrew still works to fasten the side panel but it can't be screwed in all the way unless I drill a hole in the new fan to accomodate the thumbscrew.

Los ventiladores no son para cualquiera, hay que sobrepasar la barrera de la estética y del precio, pero cuando lo haces te encuentras con la máxima calidad posible y los lideres indudables de la industria

Decent quality fan

I picked up 3 of these fans to upgrade the intake fans on my Fractal Design Define S2 case. They run whisper quiet, even at full speed, the build quality is excellent and I can feel the air being pulled in with my bare hands through the intake vents. Overall I am very happy. They are ugly as sin, but where I have them positioned you can't really see them so no harm there and Noctua does offer black fans as well.

Puedo decir con facilidad que no existe ningun ventilador que supere los noctua, tiene mucho flujo de aire y es bastante silencioso lo unico malo son los colores pero despues de un rato te acostumbras a ellos.Sin duda alguna mucho mejores que los Corsair que venian incluidos con el gabinete. No duden nunca en adquirir productos Noctua no se arrepentiran.