ExGizmo 80cc 2-Stroke Bicycle Gasoline Engine Motor Kit DIY Motorized Bike Single Cylinder Air-cooled

Runs great

This product looked good at first but then multiple issues came up the carburator would leak from the air filter the chain keeps coming off after many adjusements dont get this product unless you feel like fixing it 24/7

The media could not be loaded.  Brilliant everything worked perfect and my 12 years put it together in 4 hours with a little help

I bought this for my 15 year old son as a project, and my expectations that it would actually work were quite low. To my surprise it runs pretty well and is a lot of fun. It does need a bit of modification and patience however. For example.... the exhaust pipe didn't fit, and we had to bend it to stop it catching the pedals. This was quite tricky as the exhaust pipe is very strong, and needed a strong vice and a big hammer. The Petrol tank slips round the frame so had to use self tapping screws to fix the bracket to the bike frame. Initially the throttle was stuck on full power, and it took a long time to figure out that we hadn't fitted the throttle cable into the carburetor in the correct way. Fitting the sprocket to the back wheel was also tricky - because if you don't get it perfectly straight and level, the chain keeps coming off. Once all of these issues were overcome, it worked nicely and I was surprised when the engine fired up on our first proper run. Note that the instructions with the kit aren't up to scratch - make sure you watch YouTube video's, of which there are a few, for hints and tips.

The media could not be loaded.  I’m not happy at all look at the state of my engine it shouldn’t have came like this!!I want a refund or a new 1 sent out ASAP !

Can someone contact me from this company - seller. Defective not working item.

Works amazing was easy to put together just make sure you have good brakes because these engines ain't no joke other than that I love it so much just brought a race carb and airfilter for it so should be even better

The media could not be loaded.  Since putting petrol into the tank the fuel filter has been leaking when the gas is turned on so I would like a replacement and also the chain tentioner has came clean off due to the baring. I’ve had it out 2 days since I’ve had it and it’s already broken other than the leak and the tentioner it’s a good product it. But I would like replacements for these items to be sent out please.

funciona perfectamente, creia que el embrague iba mal, pero simplemente hay que tensarlo, porque va duro, pero mucho mejor que vaya duro a que vaya blando,yo creia que no embragaba bien, pero simplemente habia que hacer un poco mas de fuerza, y asi tienes mas control sobre el, y la verdad que es una gozada coger la bicimoto por el pueblo

intanto è ottimo, l'unico problema è che il filtro della benzina subito gocciolava molto, ma è stato risolto facilmente con una fascetta. è bellissimo purtroppo non si può usare in strada. se ce qualche problema aggiornerò la recensione

J'avais peur car mon premier moteur venez d'amazon et le piston a foiré en même pas un mois résultat heureusement que je n'allais pas vite car l'accident m'aurait pu être fataleMais se moteurs aucun soucis a signalé il est de très bonne qualité je ne voie aucune différence avec mon véritable moteur (ZEDA) le seul bémol viens des photos de l'annonce qui ne montre pas le moteur que vous recevrez (donc si le vendeur voie mon message il serait judicieux de mettre des photos qui correspondent au produit "voir mes photos")

Pictures make it look so easy and straight forward lol . If you are feeling brave and wish to take this task on i wish you luck lol. Any how you will need a peddle extractor for the left side hits muffler or buy another muffler that has flex tubing that runs along top of bike frame if your dont want to go that route then you have to buy peddle extenders. Make sure you check all bolts and check to make sure bucking bar and ball bearing is in ,mine was not so again had to order this. Next once it was all put together and the extra parts you need was installed it was time to do a last check over to make sure all is secure and not missing any parts. It did look so pretty all done up and finished but guess what it would not start ? So i checked compression ,all good there , proper fuel mix and was getting to carb bowl .as far as spark is concerned none? unhooked kill switch and checked the CDI ignition coil dead. Had to replace that, faulty i am guessing? Any how all checked out and i figurer i was ready to roll lmao NOT ? Still will not start and then started to check more things man this is a pain so at this point it will not start?? PS if your going to buy one make sure you buy a pull start another extra lol . Happy building.

Faltan piezas y esta usado.