Description
- Compatible with all Windows platform XP VISTA 7 8 ! Dealerlevel diagnostics system for Vauxhall cars. Similar to the main dealer Tech2unit but 1/30th of the price. It covers almost all Vauxhall cars, even new cars with CAN-BUS baseddiagnostic, such as Vectra-C, Astra-H, Zafira-B.
- Firmware Version: v1.45 Software Version: 2010Multi-Language Multi-languages: EN / DE / HU/ RO / PO / NL Supported Vehicles: Most ofOpel/Vauxhall cars between 1996-2010 and GM Based Saab 9-3/9-5 Theprogram lets you to read out and clear fault codes, shows you live data, letsyou to perform output test, and supports remote, and key programming (NOT ALLMODELS SUPPORTED).
- The program supports many control units, like Engine, Automatic Transmission,ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic ClimateControl, Body Control Unit, just to name a few examples. Since Vauxhall uses many pin in the OBD connector, the diagnostic interfaceworks as a multiplexer, and selects the appropriate pin for communication:PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- Fault codes will be shown with all available information: - Full fault code text description - Full status information (Present, Not present, Intermittent) You can print out, save, or copy the fault codes to any other application. Fromthe fault codes window, you can go directly to the measuring blocks window. Theprogram shows you measuring block information on many control module, you canchoose anything from the list on your own.
- The program is capable of showing 8 measuring block parameter simultaneously.The sample rate is depends mostly on the communication protocol. For example,older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, duringcommunication, while newer Multec, or Bosch units are faster (using KWP-2000),and the newest CAN based control units are very fast! You can also run output tests on many controllers PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Supported Models: Agila2000-2009 Antara 2009 Astra-F 1992-2002 Astra-G 1998-2010 Astra-H 2004-2010 Astra-J 2010 Calibra 1996-1999 Campo 2001-2003 Captiva 2009 Combo-C 2001-2010 Corsa-B 1994-2003 Corsa-C 2001-2010 Corsa-D 2009-2010 (Not the Fiat 1.3 CDTI) Frontera 1996-1999 (Not the non Vauxhall engine) Frontera-B 1999-2003 (Not the non Vauxhall engine) Meriva 2003-2009 (Not the Fiat 1.3 CDTI) Monterey 1997-1999 Omega-B 1994-2003 (Not the BMW engine) Sintra 1997-1999 Speedster/VX220 2001-2010 Tigra 1999-2000 Tigra-B 2005-2009 Vectra-A 1992-1995 Vectra-B 1996-2002 Vectra-C/Signum 2002-2009 Zafira 1999-2005 Zafira-B 2005-2010 GM Based SAAB 9-3 (Not the 2.3 enigine) GM Based SAAB 9-5 (Not the 2.3 enigine) *Note: MOVANOor VIVARO are not supported! * If you want to work onmodels between 2011-2012, please buy 2012 OP-COM with PIC18F458 inside
Note:
(1) For Windows 7 / 8 , please go to Device Manager to update the driver forthe interface manually from the driver folder on the CD
(2)this auction does not include a OBDII to 10pin adapter cable which isrequired for some old cars. If you also need the 10pin adapter cable, pleasevisit our ebay shop.
Installation guide:
(1) Open the CD,install the software following the instruction
(2) plug the device into USB to install USB driver (for 32bit operating systemthe driver will be installed automatically.)
***for 64bit operating system, you may need to locate the driver sourcemanually to the USB Driver folder on the CD for installation
(3) Run program, select revision A and save the config then have a InterfaceTest in the program, if you can get a success window that means the device isready for diagnostics, enjoy!
Captiva MAXX 2010You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily. With this tool, you can learn keys to immobiliser, and remote keys to the central door locking (ONLY FOR A part of models, NOT AVAILABLE FOR ALL MODELS)
You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
You can code SAB6, and SAB8 airbags with the software.
You will get：
1 x New 2010 OBD2 Diagnostic Scanner for Opel/Vauxhall/Saab
1 x USB Cable
1 x Mini Software CD (2010 Multi-Language Software + Instruction + USB Driver)
