LEADALLWAYOutboard Boat Motor Stand Carrier Cart Dolly Storage Pro Heavy Duty Multi Purposed Engine Stand

All parts in the box, holes drilled accurately. About 15 minutes to assemble. No words with the instructions but decent picture. There are 3 lengths of bolts which I didn’t figure out until the end. Finger tight first time around to make sure you have it right! Perfect storage and work stand for my Honda 2.3 hp.

The product is strong and stable. The assembly directions are essentially non-existent. The bolts are not even identified by length and point of use. You'll have to use common sense and take advantage of the product picture. My advice - assembly everything loosely, making sure bolt length is sufficient THEN tighten everything. That being said, I like the product.

I don’t think for 100 bucks you could find a better stand. I have my 30 HP on it but saids it’ll hold up to a 115 HP, and I believe it. Yes is made in China but it’s heavy duty, very easy to put together, and easy to push when fully loaded. Too bad the US can’t build this at a reasonable price. Mine came from Amazon in 3 days. It was packed well and all parts were there.

Instead of receiving a new, well-made and ready to assemble outboard motor stand, I got a shelf-worn, previously opened box containing parts that (with talent, additional tubing, a well equipped metal shop and a can of spray paint,) could be used in the fabrication of a complete, functional and new-looking outboard motor stand.Seriously: What I received (and am returning) had evidently been previously returned and/or scavenged from, and the box's contents were not confirmed before it was resealed with clear packing tape. Some of the frame's steel tubes were scratched, and they were either very old or had been wet, as they were already rusted inside. The woven strap was crumpled and soiled with dirt, grease and/or -- I don't want to guess. No parts list, instructions, customer support number, or even images of the stand were included inside or on the box.Disappointed but still undaunted, I searched YouTube and found that "Leadallway" has a channel there, featuring some modestly helpful assembly videos. I chose the video for this (15-30 hp motor) stand and, playing it in slow motion and pausing to follow it, began to assemble what I had, threading the nuts onto the screws with my fingers only. This long and careful effort revealed that one very major part was missing, others were duplicated, and others were so poorly made (...or wrong for this model) that I couldn't even begin to get them together.I thought about getting the metalworking tools out, but then came to my senses. I'd come here to buy a product, not another project.Photos:1) Just purchased and loosely assembled incomplete "Leadallway" outboard motor stand (for 15 to 30 hp motors,) showing (missing) lower crossbar & misaligning side braces. ...Pictured behind redundant parts mistakenly delivered in Leadallway box (extra handle crossbar and extra axle spacer on floor,) & in front of (worn, (& water damaged?)) Leadallway box and (new) Amazon shipping box.2) Crumpled, soiled strap and misaligning side braces -- bolt holes are multiple inches apart.3) In dry bathtub for best contrast/visibility, plastic bags which steel tube frame parts came wrapped in. Reddish "stains" are rust from inside tubes....I'd kind of like to give it more stars because it looks like it'd be very sturdy and durable if it could be fully assembled. ...But since it isn't all here, can't be put together as I received it, and the person or people who taped that already opened box closed thought... Well, just what did they think? -- That I wouldn't notice anything wrong?! ...One star. ...Very disappointing!

Outboard motor stand

I was expecting a little better from this manufacturer. Yes it is sturdy when assembled, but I had to loosen and retighten every screw at least twice because at each point of assembly, holes were not even close to lining up. Instructions are a joke to say the least. Thankful I am a mechanic and can make sense of the scribbling instructions. Screw heads are a slotted truss head design and very shallow slots so they can be very easily damaged or ruined if not careful and using good quality screwdrivers. NO mention of what screw goes where either. 3 different lengths so up to the person to figure what one goes where. Apparently over in China where this came from, they have a different left and right from ours here as the handles were marked incorrectly, so more disassembly and reassembly. Also, the cart is too upright and easily tipped over foreward without a motor on it, and even then all to easy to tip forward. Old carts used to be made so the mounting board was at least close to a transom angle so the motor would be somewhat upright. This one is straight up so it is impossible to have the motor vertical even when trimmed all the way in. I collect and restore vintage motors and have a good collection of new and old carts. This one rates only as acceptable compared to others in my opinion. I will not reorder this one for any future needs.

The media could not be loaded.  Ahoy! Captain OC Jamie here, this product is very impressive. Balances the motor well with plenty of room to wrench or store. Rolls with a sturdy and smooth easy. Have a 9.9hp on however this could handle much more. Front wheels are good soft rubber so it does note feel like a shopping cart.Only room for improvement would be better hardware, but the provided bolts are adequate. I am buying an additional one.

#1, came poorly packed in box which was nearly destroyed when it arrived. Too weak for such heavy metal parts. Box was split open and there were missing parts / fasteners. #. 2.Some of the fasteners which did manage to survive shipment were the wrong size and did not fit the holes or were too long or too short. I had to make a trip to the hardware store and buy $12.00 worth of additional bolts the correct sizes and also drill some new holes in the frame. #3. Once assembled the stand was nor stable, parts could and would slip and slide around making the stand unstable. I would prefer to have a better engineered stand with all the right parts shipped in a stronger box.

Absolutely solid and safe, recommended to buy

Good product, did the job. A little sparse on instructions, especially about bolts. Plastic caps for sharp bolt ends would have been nice when cleaning or repairing.

Took a matter of 10 minutes to put together, no missing parts, predrilled holes all lined up,and it works great for my five HP motor, l would definitely recommend this product

Very difficult to assemble, holes drilled in wrong locations so once unit is assembled the arms are not parallel with eacher other or the cart.This cart is not worth the money spent and if it wasn't so difficult to disassemble I would credit it back.

Easy to put together, dual rear wheels spread the load, two casters on the front make moving it in the garage a snap.No negatives to report and for the price? It's a no brainer!