XKH- Motorcycle Black Rear Passenger Foot Peg Compatible with Yzf R6 2006-2009 2010 2011 2012 [B00Y7CENDW]

As the other reviewer said, the fit is great; make sure you have the bolts to mount these.Also, my 2 cents here is that the shims are just a hair too thick, making assembly a little more difficult than it could be. I understand that mechanical tolerances probably aren't a huge priority given the price paid, but if I had to come up with a niggle, the shim thickness would be it. Using a shop rag to protect the finish I was able to tap the foot peg into alignment.It might make sense to skip the shim at first and use the bolt + the ball bearing + the spring to get an idea of how to assemble and keep things together when hammering, and then go back and assemble with the shim in.I've seen some other foot peg installs where folks used a dremel or die grinder to shave off some of the peg's surface that mates with the shim, but for the set I received here I didn't need to do that. Might have made it easier but I'm more of a "hammer it, wd40 it, or duct tape it" installer.

The black chips away relatively easy

Fits great, make sure you have the bolts to mount it.

I wouldn’t recommend these passenger foot pegs..1. It scratches way to easy.2. It’s a pain trying to put the peg in the arm even while using grease. You may have to grind it down a bit for it to fit.3. There’s no roll bearing inside for the peg itself. I tried using my stock roll bearing for the pegs but didn’t fit...The more you screw the bolt down to lock the pegs with the arm it becomes harder to flip in and out. That’s the reason why you need the roll bearing, without it the more tension on the screw that goes inside the peg frame and through the peg itself it makes it almost impossible to flip in and out..

They do fit, They are not put together when you get them and they was a bit!# to get the pegs on them. At least for me it was. They go on the bike with no problem though.

I didn’t get all the parts to it.

Nice fit . Only one issue foot pegs were to tight had to grind down sides to be able to mount them.

Need to be Incredible Hulk to get the pegs into the bracket. Almost impossible to put together. Spend money to buy OEM. Don’t waste money on this.