Power Stop K6373 Front and Rear Z23 Carbon Fiber Brake Pads with Drilled Slotted Brake Rotors Brake Kit For 2013 2014 2015 2016 Dodge Dart

UPDATE---It's been almost four years with these brakes, and they're only now starting to wear down. They've performed admirably, and I would recommend them to anyone.ORIGINAL---My dad and I got this kit installed two days ago on a 2013 Dodge Dart. They replaced stock brakes and rotors.After removal of the wheel and caliper (If you're reading reviews for brakes, I'm sure you know that you'll need a 14mm, 16mm, and 18mm socket for this job), the brakes and rotors went on so well that my dad repeatedly remarked on how easy they were to install -- the brakes didn't need trimmed; the rotors were easy to align, and were light due to having holes and slots milled into them, but still feel premium in construction.One thing to note, though, is that the scratchers are set up such that they won't give you much warning before your brakes are completely gone. So, be proactive with replacing these once you hear them.In use, they've felt buttery-smooth -- enough so that my girlfriend was able to color in the passenger seat while I drove through a stretch of highway with varying speed limits. They're quiet, too, aside from some noise in the first mile or so of using them.I've only had them on for a few days (and only put about 100mi on them), but they've proven better than stock parts so far. I'll try to remember to update this review in a few months for a long-term idea of how these hold up.

great fit easy install and they great stopping power. and surprisingly quite highly recommend

Great brakes love them my car stops the best it ever has

Break pads make noise on every single bump in the road. They fit in the right spot but are loose in the seats.The rotors work well and the car stops great but don't think I'll buy them again due to the noise of loose padsEdit: I have since bent the retaining clips to hold the pads in place more effectively. No noise and stop on a dime. Excellent product

Great breaks does take some break in time

I ordered these to install on a 2016 Dodge Dart with 60,000 miles on the original brakes. Original item delivered was a work table. How do you confuse brake parts with a table? After returning the table I received the correct parts. Installation was pretty straight forward, although I had to buy some new sockets for the star bolts on the front calipers. After installation I did the break in procedure as specified, and the stopping power was obviously better than stock. After a week however, I noticed the brakes were clattering over rough roads. I contacted Power Stop asking for assistance in addressing this, and was just told to check the seating of the anti-rattle clips. I pulled the wheels and calipers to check the clip positions, and they were all where they belonged. I did notice however that the clips were too wide to hold the tabs on the brake pads in place. I pulled all of the clips and bent them to tighten the contact points with the brake pads. It seem like the clips should have been bent to the correct dimensions before they were shipped. Anyway, my adjustment eliminated the rattle, so everything is good for now.

Very high quality components. Stopping ability is better than expected. No fade.I flushed the fluid at time of install. Very happy.

Easy to install on a 2013 Dart and way cheaper than the Auto stores. Squeaky when cold but no big deal.