TINMORRY PLA Filament 1.75mm, Rapid PLA 3D Printing Filament, Compatible with Most FDM 3D Printers, 1 KG 1 Spool, Black

Neen using petg and pla from this brand since hearing about it through Facebook groups, no issues, no snags and great finish quality, on par with prusas stuff that I've used

Came well package vacuum sealed and inside a cardboard box. A nice touch is the ziploc bag is provide to protect the reel from moisture if stored after opening Prints vert well, no issues with first layer sticking to printer bed. Good surface finish too. As others have said tolerance of the filament is well within the +-0.02 stated on the reel when checked with my calibrated micrometer. The black has also stayed a deep black, I’ve seen others go ever so slightly grey. I shall buy again, and try some different colours.

I extrude this at 200 deg C and 60 deg C bed temp.If your bed is clean, you should have no issues with adhesion. It produces a good finish and I've not had any problems once I got it dialled in.

Have printed with a lot of cheaper filaments and this is by far the worst filament I have ever used. Tried multiple times with multiple settings. Nothing works. When it does stick to the plate the quality it awful. Overall the quality it's terrible. Do not buy this!!

Was very skeptical about tuis filament as it is jot a brand I am used to, but woah I was so wrong 😮This filament is fantastic. Great bed adhesion, fantastic layer bonding. Overall quality is excellent! Smooth as butter 😁Printing temp 200, bed temp 60, down to 55 after 2nd layer.It is also great on price. Nearly £18, great value for filament. Definitely stand with the rest of the great brands. Definitely worth a buy.I will be buying again from this supplier if filament continues to be this good.

I rarely post reviews here, but have to say the first reel I bought (black) was because it was one of the cheapest. I am glad I did as it was well packaged, properly wound, and the prints are always smooth. I have started buying this as I run out of other colours and have not had any issues with them either. As long as they have the colours I want I will make Tinmorry my primary choice. PLA on Ender 3, pretty much everything at 200/60!

Bought a few rolls to print some dimension accurate prints, and it performed admirably. Could be a bit fiddly with adhesion, a bit of extra retractions on higher temps, but nothing unusual. Temp tower came out pretty much identical on all the temps. Of printed faster/colder gives a rather matte look as well. Absolutely no snagging, and an extra ziplock bag is pretty handy.

I mainly use Sunlu or Eryone but got this as it was on offer. I have no experience with black filament but I can say it is very glossy and smooth with a great finish. It adheres to the bed really nicely at 60o and seems to be slightly more robust than other filaments I have used. Will definately be buying this from now on. Oh it also comes with its own ziplock bag for storage after you have opened the sealed package.

Ho la stampante da qualche mese e adesso che sto imparando ad usarla stampo molte cose che mi servono in casa e sul lavoro. Utilizzo molto il colore nero, sta bene su tutto non si sporca facilmente e costa anche un po meno del colorato. Ho provato a prendere questo filo della Tinmorry in pla nero e devo dire che si stampa molto bene. Ho stampato a 200 gradi e bed a 55 su una artillery X1. Oltre ad essere arrotolato bene sulla bobina, nella scatola troviamo anche un sacchetto che riporerre la bobina al riparo dall umidità quando non viene usata ed è la prima volta che lo trovo fornito insieme. Quindi direi un ottimo prodotto con un occhio di riguardo per il cliente.. Grazie per aver letto la mia recensione, se la ritieni utile votarla. 😉

いつもブラックを使っておりますが、非常に安定しており使いやすいです。もう少し価格が下がれば、言うことはありません！

Ich habe dieses Filament zum ersten Mal getestet, es lässt sich ohne großen Aufwand mit guter Qualität drucken. Die Haftung ist bombenfest auf einem perforierten Federstahl-Druckbett, Aufwickelung könnte schlechter sein, wird gut verschweißt mit Silica Beutel geliefert.Drucker: Anycubic Kobra NeoNozzle / Bett: 210°C / 60°CPositiv:- Farbe passt- keine erkennbaren Qualitätsunterschiede innerhalb der Rolle, Druckbild immer gleich- Überhänge sind absolut kein ProblemNegativ:- trotz Augenscheinlich perfekter Wicklung hat sich das Filament 2 Mal verknotet, davon 1x während des Drucks gerissen, da ich es zu spät mitbekommen habe. Ich vermute das die Lagen zwar super sauber aber etwas zu eng auf die Rolle gewickelt sind.- Toleranz teilweise größer als angegeben: - 1. Messung im ersten Drittel der Rolle, 1,69mm, 2. Messung im 3. Drittel war okay mit 1,72mm. Ich hatte deswegen aber keine Probleme bei der Verarbeitung.Alles in allem kann man das Filament gut verarbeiten.

Se lo trovate in sconto non esitate a comprarlo è molto buono e contiene anche una busta richiudibile per conservare il filamento, consigliato

Parlo per tipo di materiale,resa estetica e trazione meccanica, ho acquistato il filamento in offerta a 16€ e mi ha veramente sorpreso sia a livello estetico che come resistenza,stiamo sempre parlando di PLA quindi non ci si aspetta la resistenza di un ABS o PETG. Sarà stata la bobina fortunata, perchè di solito non è ben visto come marchio ma proverò ad acquistarla di nuovo,in offerta,e in caso di risultati negativi rivedrò la recensione, per il momento sono 5 stelle, consigliatissimo.Temp:195-55 Ender3 piatto in vetro