EasyPour Epoxy Resin Kit: 1 Gallon: 1:1 Ratio - High Gloss Crystal Clear Resin & Hardener, 2 Mixing Cups, Silicone Spatula, Plastic Spreader for Wood Tabletops, Countertops, Casting, Art & Crafts

The EPE EasyPour Epoxy kit arrived on schedule and worked perfectly. I’ve used various self leveling epoxy products over the years to provide a clear, hard and easy to clean surface. In this case I was refinishing several 36" diameter high top tables for a local establishment. The final product met all the wishes of the establishment’s owner as well as my own expectations. A couple notes that may help new users.First, bubbles. Yes you can get bubbles in the epoxy after you’ve poured the product and it’s leveling. Remember that bubbles can form when the resin is poured over any porous surface. This includes wood, concrete and a lot more. To mitigate the problem the best option is to seal the surface first. Options for sealing wood, my projects, include use of a good oil-based polyurethane. A water-based product may work as well but I’ve used oil-based sealers as I am sealing over an oil based stain. Alternatively, you can also mix a smaller batch of the epoxy resin, pour it on the project surface and drag it out to seal the surface. Whatever sealing technique you use just make sure that the surface is well sealed. For polyurethane I generally use a minimum of 2 coats and have applied up to 4 coats if I know the wood is particularly porous. Removal of any bubbles that may now form in the final pour is easy, just add a little heat from a heat gun or hair dryer.Second, temperature. The EPE EasyPour Epoxy specifies at minimum temperature of 75̊F. When checking the temperature I’ve found that it’s best to check the temperature of the item to be epoxied as well as the air temperature. If you’ve had the project item stored in a different location at a lower temperature allow the item to come to a stable temperature of 75̊F before starting the pour. This helps ensure the best final product.The EPE EasyPour Epoxy on-line instructions are reasonable. The biggest deficiency I found was related to computing the volume of epoxy you’ll need for a project. In my cases, I’m working with flat surface tables, some relatively simple math will get you the appropriate volume. As a note, I always use metric measurements for the calculation of epoxy volumes as it’s overall a little easier to convert the surface area/volume for mL instead of ounces. Also, when I compute the required volume I generally add an additional 25 to 30% to cover the fact you can’t get all the epoxy out of the mixing container and there will inevitably be some material that will run over the side of the project surface and be lost. 1. Calculate Surface Area Circle: π r2, 3.14 x radius squared Rectangle: L x W, length x width 2. Calculate Project Volume Surface area x depth 3. An example: 36 inch diameter table top with an epoxy depth of 1/16" or 0.15 cm 36" diameter top = 90 cm diameter = 45 cm radius Pi, 3.14, times 45 squared, times depth; 3.14 x 2025 x 0.15 cm = 955 cubic cm, approximately. Add 25% for extra and you’ll need to mix about 625 mL of resin and 625 mL of hardener.

I was happy with this product until the last order it was completly sealed in the package with plastic this order it was not sealed with plastic so it could be tampered with and I do not like this. I had good resin in the past tampered with deep pour and deep pour does not work well pour over projects and no UV.

Great product. Needs to be 78 degrees F to cure.

Lasts for a while, able to make many smaller things or coaster

I have ordered this product multiple times. It is easy to work with and I have not had any problems with it.

The consistency of this epoxy is so messy and clumpy. I have tried quite a few brands of epoxy and this one is nothing like any i have ever used. I originally did an exchange because i thought it might have been a bad bottle but after receiving the next it was the same. So i returned both. Still waiting on my refund. Was hoping this was gonna be the great since all the reviews were good. But not everyone likes the same tea.

I thought I'd give this a shot since it costs less that what I usually use and wanted to try it. All I can say is...you get what you pay for! I have had to redo a project TWICE because of the amount of bubbles the mix produces even after it has set for a while and looks clear. It's super thick after mixing so bubbles don't get much of a chance to escape. You MUST degas the mix before pouring! If you don't have a vacuum pump, don't bother with this. You MUST use a vacuum pump to degas this. I've been making epoxy projects for years, my fault for trying to save a buck.

Don't know how it hardens or performs as my materials are still curing. However, even if it's great I can't recommend this product due to the horrible odor and chemicals it put in the air. My house smelled like chemicals for HOURS even with ventilation!! I got a headache from it and had a hard time sleeping. If NO VOC is important to you I would not buy this.

I loved the product just make sure you pour enough Epoxy to do the job. I had to do it twice. On this project lol.

The media could not be loaded.  I got this because the price was right and I needed something that can be for big and small projects. Extra mixing cups and a silicone spatula/spreader is a bonus. I was quite pleased to see that there wasn't much bubbles at all after mixing, that's making sure resin and hardener are at the right temperature beforehand. Cures in the time it's supposed to, no issues at all. I didn't smell any harsh odors, just a small amount but that's normal. I also was trying out a new mold and I love how it turned out. Overall, this resin is nice to work with. The price is right for a 1L kit with the bonus cups and tools. I will definitely recommend this.