80% VLT Nano Ceramic Car Front Window Film 99% Anti UV Heat Insulation Sun Blocking Solar Window Tint for Car Windshield Rear Side Window, Light Blue, 20Inch X 10Feet

Brand "SW" 80% ceramic tint 20"x10' . Very light and almost not able to see window is tinted. My stock windows are very slightly baby blue colored so this addition isnt easy to see. I did only the drivers side window. Installation was ok, but this was my second attempt, and its not perfect. If you want perfect go see the pro installer. This 2nd attempt is really nice however. Use lots of water. The old tint removed easily by just peeling it away from the glass, but the tint was in place only about 2 months. Follow the instructions, but a lot is going on when installing this stuff, so for a non-pro they should not expect pro results. Good temp reduction and i'll know soon about uv reduction (i have uv cards ready for test).

Easy enough to install. I amA mechanical type person, so super easy. However it was installed on a bedroom window that faces the morning sun. Incredible heat coming through the glass. I purchased this in hopes to cut that heat down. I maybe had a 15-20 percent decrease in heat. This stuff is pretty much worthless. Don’t waste your money here.

I bought this for my driver and passenger windows. it was a major PITA to install but it made a HUGE difference. I would get so hot on my drive home 40+ minutes of direct sunlight in the south. I can hardly feel the sun on me at all with this installed. I also notice my car sitting in my driveway doesn't get nearly as hot inside as it used to. Going to be buying more to do the back windows. I Found using A LOT of water made it easier. I also couldn't get out all the bubbles, but they baked out within a couple days of my car sitting in the sun.

Tough to use on curved glass, like any auto glass. Not sure its really ceramic tint. No material from company. On a positive note it is optically clear. Time will tell the take for this stuff. Using it to get some heat rejection on factory privacy glass since it has zero heat rejection.

I did a quick test of this 80% VLT (46% TSER claimed) film next to a piece of 35% VLT (43% TSER claimed) by temporarily adhering both to my windshield and parking in sun. I measured the temperature of my black dashboard after 15 mins and 2 hours in the sun.This 80% film reduced the dashboard temperature by approximately 10 degrees. The 35% film reduced it by approximately 20 degrees. Supposedly they have about the same TSER value, so I would have expected both films to have similar results. However, this film only had half the heat reduction of the darker film.Keep in mind, the area without any film was at 155 degrees after two hours. The 80% and 35% were at 146 and 135 respectively. So, this will help a little, but it's not going to make your vehicle feel cool if you have to park in the sun.I decided to use this anyway because it does provide some benefit, just not as much as I hoped. It would be interesting to see how this compares to something like 3M crystalline if I could find a sample to test with.

This tint does exactly what I want it to, and that is: it blocks a ton of heat without looking aftermarket.On old vehicles with big windows, I strongly dislike the look of heavily tinted glass, but the big windows tend to let so much heat in, you bake in the sun.This 80% tint blocks the heat from the sun while looking factory. The jury was out on wether or not it worked until I got stuck in traffic in the desert. The sun was shining right on my face through the window and barely felt warm, but as soon as I rolled the window down I felt the full force of what was being blocked by the tint. It was at least a 70% reduction in heat. For that I will call it a total success. 1 10ft roll is technically enough to do one truck (3 windows)

Product caked nicely packaged. High quality film, very easy to install. Was able to complete the install without bubbles and gave me the performance I wanted.

Install could have gone better. I watched a lot of videos but it’s best to get a feel for it if you’re doing it yourself. The blue hint of tint looked nice. Although, it clashed with my rear window tint which it much darker - user error. I drove around for 4 days with this on my driver and passenger side and I could still feel the strong heat of the sun on my skin. I commute about 85 miles daily in the Southern CA sun and couldn’t tell a difference between non-tint and tinted sun exposure. To me it felt the same. Removal was difficult at first so if you still decide to purchase this and then regret it later…you’ll need a heat gun to remove. Start from an edge or score it down the middle. Make sure you score it enough to go through both layers, tint and adhesive layers. Hope this helps!