KuatRack Dock | Sturdy Versatile Easy to Mount Rack Station for 2" & 1.25" Hitch - Up to 115 LBS Weight Capacity | Hardware Included, Orange

Keeps my bike rack off of the ground and it’s very easy to use. It’s well made and very sturdy. Thank you.

This is why I love Kuat products. They work hard to make them work as they should and look great...but then got the extra mile to ensure they round out the experience with accessories like this storage mount. It works perfectly, keeps my pretty hitch rack off the ground and out of the way, and frankly looks so cool in the back of my garage. Highly recommend if you have a Kuat hitch rack and a wall to mount this to.

You really feel you’re getting value. Comes in a well designed box with everything you need and compliments the bike rack

I needed to find a way to store the Kuat bike rack that I purchased and low and behold they make a dock that mounts onto the wall to store it. Saves a lot of space and it works great. I mounted it on the wall in front of our bikes and just high enough to let the tires clear below it. I was going to store the bikes on the rack on the wall but the directions say not to as the max weight is about 100lbs. The Kuat rack and the two bikes are about that or more so not taking chances just put the bike rack onto it and it is goo to go. does not wiggle or move once the tightener is turned it is a stable as it is on the Volvo xc90. Looks good and works …..buy it if you have their racks.

I pined for a Kuat NV 2.0 bike rack for a long time. Once, I finally bought one, I didn't anticipate that it would be somewhat of a cumbersome item to have around. When its in the garage, there's no good way to keep it out of the way and it doesn't sit flat on any of its surfaces. Plus, its a beautiful bike rack and you'd hate to have it on the concrete where the finish might get scratched up. So, I had mine precariously propped on discarded pieces of foam when not in use. The rack was always kind of cluttering the garage and I was worried that the kids might tip it over.This rack dock is the obvious solution. The installation literally takes 2 minutes and the process is almost idiotproof. You only need a stud sensor and a drill. Kuat provides the drill bit. The rack is secure, looks good. I installed mine about a foot off the ground, so I no longer need to bend down to pick up the rack from the ground. I'm glad I bought this. I had previously looked into wall mount hitch docks from other companies and this one seemed to be made to higher standards.You should be aware that the weight limit for the dock is something like 100 pounds. You cannot put your rack up on the wall and then store your bikes on the rack when it is docked to the wall.

Such a simple concept , but so great to have a quick easy place to keep a bike rack. They are awkward and usually all over the garage and always in the way. Now I just back in and take it from the rack and plug it right in. Totally out of the way now and easy to access. Only sits about a foot from the wall so it doesn’t even take up much usable space in the garage. Great idea. Great product. A place for everything and everything has a place. My OCD thanks you Kuat.

I'm so happy to have this product. It was a bit expensive for a box of metal but it will be worth it in the long run! I ordered this just after christmas and it arrived as expected. Installed the mount approximately 2' off my garage floor just above the foundation wall in that part of my garage. It was very easy to install into a stud that was behind some peg board where I wanted to install the dock. The instructions said there was no need to predrill the holes by I might recommend it. My Dewalt 20v cordless drill struggled to get the screws all the way in and be tight. I had to hand tighten the bottom bolt which I was afraid would break but it held up! My Kuat Rack is now out of the way and looks great hanging on the wall!

I purchased the Kuat Rack Dock to store my Sherpa 2.0 hitch mounted rack. It is a very well made product and worth the price. It was easy to install and keeps my new rack off the garage floor and out of the way. Kuat provides easy to follow directions and there are several videos available online. The most important thing is to make sure to locate a wooden 2" x 4" or larger wall stud to which to fasten the Rack Dock. It will not work with metal studs, concrete walls or block, or drywall anchors. The Rack Dock accommodates racks for either a 2-inch and 1.25 inch hitch receiver. An adapter is used for the 1.25-inch rack.

This product is the perfect companion to the Kuat 2.0 rack.It is easy to install and keeps the rack off the floor and out of the way.It is also aesthetically appealing if you can believe that!Highly recommend!

Made my Kuat rack easy to store and double as bike storage.

This wall mount is great. A simple design, easy to mount, easy to use and really well made. No bad welding or misaligned holes. It is worth the money in quality and in functionality. I love it and would recommend it to anyone.By the way, I’m using this mount to store my bike carrier for the winter. It is Kuat Nomad 2I would like to add that these are simply the best looking (and functioning) bike racks on the market. In my opinion, of course.

I received the product 1 day earlier than expected. It looks and feel high quality. It is worth the price.I had some questions regarding the finish of the product and Rack Attack got back to on the same day. They resolved any issues I had. It is one of the best customer service i experienced.Thank you, Rack Attack!

Perfect solution for neatly storing your bike rack. Good quality, comes with adapter for 1 1/2" hitch too.