Neato Botvac Connected Laser Lidar Drive Belt O Ring Replacement Buna N Belts Plus Spare Side Brush Compatible D3 D4 D5 D6 D7

Long term test to be had yet, but the fit was good and it works on my Botvac Connected or newer D series bots with the smaller lidar motor pulley, of which the lidar motors can be problematic after use. My lidar motor failed at 840 hours and the belt was cracking, but still functional.It included a silicone or OEM style side brush belt, but I have terrible luck with these breaking. The brushes have short and stiff bristles, which causes the brush to get caught up on carpet and uneven flooring. When this happens, the belt will naturally slip on the motor pulley. Overtime, this can cause the belt to burn up and break. I fault the vacuum manufacturers side brush design, more so than the belt suppliers for this.

Takes like five minutes to perform the replacement procedure. You’ll need a longer t10 bit to get at the screws to take off the top of the chassis.

Product is quality and fit perfectly. Fixed my old robot right up!

My 5 years old Neato stop working because of worn/stiff Rubber band to the laver lidar. I ordered a new from Handyman dad. It took 10 minutter to repair. Now everythings is ok. Thanks a Lot for Selling these , in Denmark hard to find rubberbands.

This one does not fit my Neato D5 Lidar right. This O ring has a little larger dynamiter than the original one and does not set in the groove all the way. This causes it the move out of place and as I spin it by hand can see it riding up rubbing on the plastic shield that covers the lidar motor/wheel. I won't bother returning it just cut my loses. Sorry didn't take any pics before putting the old one back on.

Purchased this to replace the belts in my Botvac Connected. Only the side brush had failed, but figured it is just preventative maintenance to replace both at once. Worked like a dream! Here’s to another 5 years of life for my little robot! 😆Update: have to purchase another belt as the first one broke within the first month of use.

My husband and I have been trying to resolve an issue with our Neato (it has stopped picking up debris). So, after watching Youtube, I decided that this was the part that I needed to fix it. This part arrived on time and was easy to place on the system, but doesn't appear to have resolved the problem. But back to the drawing board to determine what is wrong with my little Neato.

Great replacement for original Lidar drive belt on a Neato D5. Easy installation. Much more substantial, expect it to last.

The belt is too thick and did not fit completely inside the drive pulley on my "neato botvac connected". It still spun but had too much resistance to reach full speed. It may fit better on the newer connected series (D3 and later) but not the original. Belt was also stiffer than original.

Just received this order today, 5 months after it was ordered. Couldn't even tell you if it would of fit properly since we through the vacuum out.