VViViDSmoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive (60" x 60")

Bought these to rewrap my headlights. I had previously wrapped them 10years ago for style and to protect the plastic, needless to say the old stuff was baked on and a nightmare. (Pro tip use a steamer tool to remove the vinyl and then mild adhesive remover. Polish the lights to remove any haze, DO NOT USE ALCOHOL TO CLEAN THE PLASTIC LENS LIKE THE INSTRUCTIONS SAY!!!! Application was pretty straightforward and I found the dry application much easier then wet, take your time and don’t rush it. It takes about an hour to wrap an intricate light good luck.

The media could not be loaded.  So I just bought some to TryI Made a headlight template (13 Outback) w paper…Laid it outCut it to size little over and slapped it onUsed razor blade to trimHadn’t gotten wet underneathThat all being said ….Had I done it carefully not in a rush and used a hair dryer it would be perfect professional looking I’m sure. I love itMy fast way is just fineA Few wrinkles but the idea was to stop the fade out in the upper portion of the lightsLooks great w some wrinkles and? time will tell if it stops the hazingIt’s supposed to be iv proof ?I Like the big roll easy to cut and fit to size versatileI went w two pieces per light for easier application less wrinkle but overall;3M ….it doesn’t obscure my turn signals at all (I didn’t cover the actual head light bulb area just the upper plastic)….looks greatProb would cut down on light output slightly? but it’s 20/80? So not blackout stuff-let’s in out 80% lightSome people think It looks purple?I can get that it almost maybe could but mine doesn’t it’s light smoke/ light black? Ez peasy cut to sizeI did dry application after a cleaning and no issuesTake ur time use a dryer to smooth wrinkles and it’s actually so nice I wanted to do my whole headlights and my fogs x4But again I don’t want any dim to my lights(Prob b minor but thats me)I’d buy it again took all of 20 minutes for both lights in the dark no reelInstructions first just tried it liked it kept itGood buy it’s really versatile and great look for sureI may eventually try to remove and do it right but? It looks fine as is and hopefully serves the purpose of stopping the fade and hazeHighly recommend

The product is great A lot of people complained here about creases and wrinkles they probably didn't use a heat gun. Got it done although I do have some experience. However I paid for 60 inch wrap did not get that both those headlights or no more than 20 inches long and I ran out of rap. So absolutely not on the size aside from that everything else was very very good

Easy installation, make sure surface is really clean

Update:This is my second time buying the same film. Easy install. I used it on my corner lights which has OEM bulges. Just heat, stretch and press. I’m not a professional installer but it looks great. No creases or bubbles.Use on my 2004 tundra headlights and taillights. They looks great!! Light smoke gloss. Mainly got it to cover cracks and blemishes on original lights, and it did just that.For installation, heat and stretch, heat and stretch. Most bad reviews seems like improper installation. Be patient or get someone else to install it.

The film is not easy to work with at all and will not do any type of curve, constantly creases and heat gun only stretches the film making it very flimsy and even harder to work with. The film has a pebble pattern which is very visible up close. I tried to install on a 2024 nissan frontiers taillights and the film would not go around the contours no matter what I tried. It would just crease and create air pockets which would not come out. If your lights have anything but a simple curve DO NOT BUY!

I was a bit skeptical when I read some of the reviews saying that it was not very user friendly to install. Nah, they are all right. This film can be a real b!tch. It can be overheated easily, it will leave glue lines everywhere, and sometimes it will separate from the adhesive when repositioning. It is also difficult to conform around raised objects. Lastly, it has a weird scale like pattern in it that might be the air release channels but they are pretty visible and don't go away. Can't tell from a few feet away, but any closer and you'll notice. Despite the steep learning curve, I am happy with the overall results on my truck. The light smoke seemed a little dark in my garage under the lights while installing, but it in the sun the next day or looks perfect. Not too dark, not too light. Hopefully the vinyl holds up well because I'm not looking forward to doing this again!

Great product

muy bueno el material pero si sugiero que utilicen pistola de calor y mucha paciencia. el material es de calidad y su aplicación es relativamente fácil.

Excellent produit pas trop teinté,s’installe assez bien

Fácil de manipular, muy bonita vista

Good quality and not too dark. Buttt doing sharp corners its sketchy. You need to heat just enough if you don't you will have wrinkles and bubbles. To ensure a good sticky film, after everything is in place and you are done, heat the area to activate the glue.

Impossible to work around curved lights, apply any heat and it would just make holes. Ended up in the bin, much better to use tints that need water to work with.