TAVR Universal Table Top TV Stand Base TV Legs for Most 22 32 37 40 42 47 50 55 65 LCD LED Plasma Flat Screen TVs, Height Adjustable Leg TV Replacement Stand, Holds up to 88 lbs, Max VESA 800x500 mm

This product worked well enough for my new 32 inch tv situation but would be better described as "center based TV feet" and should completely avoid using the word "stand". These are just feet on rails that screw into the mounting holes in the back of your TV.Also it is important to know that the feet 13-3/4 inches long and about 8-1/4 inches at the widest point.So MINIMALLY, you need a table/stand/furniture top that is 14 inches (front-to-back) x 9 inches wide (left-to-right), or if the surface is round you will need a 14 inch round top table/stand. I would suggestFYI, my old little rolling tv furniture stand is 14-1/2 inches x 23-1/2 inches and is holding the tv + these feet well with as small of an furniture footprint as possible for holding up a 32 inch TV.To summarize the above dimension mumbo jumbo, the feet quite long in length for a 32 inch TV.This is ok in general, because the product is made and claims to support up to a 55 inch TV (personally I would attempt these feet for such a big tv but haven't tried so have no real world input on how they work with anything larger than 32 inch).Assembly of the legs was pretty easy and they provide the tools needed. Leg assembly took like 5-10 minutes of easy slow paced work.The directions were easy enough to follow... for people who are able to follow directions. If you don't do well with directions then a youtube video will show you how easy it is.Fastening to the TV was also easy for my 32 inch TV with a flat back.In short, screw went through washer then through rail and into the TV screw hole. Tighten it down, done!Again the directions cover a number of different types of TV's and their backsides (flat, curved, etc.). If you can follow directions you simply follow the directions that match your TV's backside shape and if needed any extra fastening components they provide (plastic rings, plastic spacer things, etc.).If you have trouble with directions... best I can say is you will spend more time trying to find a video for this product that matches your TV backing than just looking at the directions and figuring it out. You can probably get by just looking at the pictures that match your situation without having to read too many words lol.Also I did not use the screws provided in the box with this product. My TV had screws in the back that I just reused. Why? Well the screws in the TV are guaranteed to fit without being so long that they stab through into the screen or electronics. Simple as that. It's a 32 inch TV so even if only half the screw made it through these leg rails and into the TV holes that would be plenty to be securely fastened.I DID followed the directions for everything else and used the silver rectangular "washer" type piece that was provided.This piece acts as a fancy rectangular washer that ensures the head of the screw will not go through the hole in the leg rail. So when used, everything is tight and secure the screw is screwed all the way into the back of the TV.Pretty standard behavior of screws and washers and fastening things together, but it's just an odd rectangular washer with 3 different size holes so it will work for all kinds of TV screw sizes.So why did I even need these TV legs to begin with?I bought a 32 inch Insignia F20 Smart Fire TV to replace an old 32 inch TV that went out.The feet on my new 32 inch TV were on the left and right corners of the TV which were a hair too wide to reliably sit on my old 14-1/2 inch x 23-1/2 inch piece of furniture (an old rolling tv stand).The TV that died had a base/legs that were in the center of the TV so this was never a problem. The new TV, nope the feet were just a little too wide.These TAVR feet on rails did the trick for my 32 inch TV. Nothing fancy. Sturdy enough for a 32 inch TV. They are getting the job done but are not something I would call heavy duty or hardcore. So for a much bigger or more important TV I would go a different route.For a 32 inch tv or something that just needs to get the job done, then for less than the $20 I spent, I would use these every time :)

This item came on time fit to my device. Little bit wiggle couldn’t tight enough but works fine. Easy to assemble. Great item.

Product works well as a workaround in case your TV didn't come with legs. I bought my used TV from someone and they gave me wrong legs which didn't work for my TV. I searched and found this product which basically works with any TV size. The base goes into the mount side of the TV and then you attach the legs. The installation is not the easiest. You need to flip over the TV on the ground or on a table for you to install this. Plus one of the screws didn't fit well. Also no screw driver is provided keep in mind. If it works for you then it's good.

I recently purchased the TAVR Universal Table Top TV Stand Base/Legs, and I must say, it has completely transformed my home entertainment experience. After hours of research and comparing various TV stands on Amazon, I decided to take the plunge with this product, and I couldn't be happier with my decision. This TV stand has exceeded all my expectations, and I'm thrilled to share my positive experience with you.First and foremost, installation was an absolute breeze. Even for someone like me, who isn't exactly a DIY expert, the instructions were straightforward and easy to follow. It came with all the necessary hardware, and I had my TV securely mounted within minutes. No need for professional installation or wall mounting, which can be both costly and time-consuming.The stability and sturdiness of this TV stand are remarkable. I was initially concerned that it might wobble or feel flimsy, but those worries were completely unfounded. My 55-inch TV sits confidently atop this stand, and I no longer have to worry about the precariousness of wall mounts. Plus, it can accommodate larger TVs as well, which is a great feature for future upgrades.One of the standout features of the TAVR TV stand is its compatibility with a wide range of TV sizes and brands. The adjustable height and compatibility with VESA mounting patterns make it versatile and adaptable to virtually any television. So, whether you have a Samsung, LG, Sony, or any other brand, this stand has got you covered.Additionally, the cable management system is a game-changer. It keeps all my cables organized and hidden from view, giving my entertainment setup a clean and clutter-free look. No more unsightly wires hanging down or tangled messes behind my TV.The tempered glass base not only adds an aesthetic touch but also provides a stable platform for my TV. It's a nice departure from the generic, plastic bases that you often find with other TV stands. Plus, it's easy to clean and maintain.Furthermore, the swivel feature is fantastic. I can adjust the angle of my TV to ensure the perfect viewing experience from any part of the room. Whether I'm watching a movie from the couch or cooking in the kitchen while catching up on the news, I can easily adjust the TV's orientation for optimal viewing.To top it all off, the customer service provided by TAVR is outstanding. They were responsive to my pre-purchase questions and even followed up after I received the product to ensure everything was to my satisfaction. That level of care and attention to customers is truly rare and greatly appreciated.In conclusion, the TAVR Universal Table Top TV Stand Base/Legs has made a significant positive impact on my home entertainment setup. It combines ease of installation, stability, versatility, cable management, and aesthetics all in one package. If you're in the market for a TV stand that delivers on all fronts, I wholeheartedly recommend this product. It has not only enhanced my viewing experience but also added a touch of sophistication to my living room. Don't hesitate to make the investment – you won't be disappointed!

It comes with plenty of hardware, easy to understand instructions. looks like a sturdy design, ALL METAL, no plastic, the base is solid in appearance. It does the job, can be used on all my TV's. (Sony, Vizio, Samsung).

Not impressed, made TV so tall that it covers my wall photos. Will look into returning and trying out a different type so as TV is lower to cabinet. Currently dealing with family death issue. Will return item shortly.

The directions were tricky to read at first, but eventually, I figured them out.Once I did, the rest of the process was easy and installing the TV stands was a breeze. I especially like the fact that they're made of metal, and come with enough nuts, bolts and screws to accommodate aoony sized TV. I never have to worry about them breaking as I might have to were they made of plasticThere will be leftover parts and hardware, but this is by design, and not a cause for alarm.