Performance ToolW88981 Anti-Fatigue Grip Mat Roll (LG) (30 Square Feet) Grey

I purchased this product in order to use for a cosplay at the recommendation of many sites and tutorials.I have almost nearly used up the entire roll, so let me give you some of my experiences:It cuts easy. You don't even need a heated blade to cut this foam unless you are going for detailed precision. I used a regular old folding knife to size it out into various squares and rectangles so I could further refine them for the pieces I needed. Simple. Be mindful, though, that it is rolled and may be a bit difficult to hold still as you cut. I would recommend rolling it out completely and flattening it with weights in order to make precision cuts.It also burns/melts easily. Don't hold your heat sources to it for more than a second or two or you risk melting away at the foam and leaving ugly indents. On the topic of heat, though, it is very easy to shape using a heat gun. Make sure to use the mid-range heat setting and do a simple quick sweep over the flat side of the foam - you will notice the difference. The color will become slightly darker as the foam reacts to the heat and starts to contract and seal. I normally do one pass across each piece, shape it a bit, do another pass as it cools, shape some more, rinse and repeat. Be careful not to hold the heat gun too close or for too long or else the foam will begin to bubble and become rough. If you burn it, it will turn an ugly white-ish color.Hot Glue: This foam is absolutely fantastic for hot glue. Hot glue bonds and hardens quickly with this foam. Before this, I was used to holding pieces of 3/8 foam together for 5 to 10 minutes at a time until the glue had set but the foam from this mat takes half that time. Be careful not to burn yourself on the glue, though, as it seems to also run pretty easily at bad angles. I've already suffered three separate hot glue burns and they aren't fun, lol.Paint and Plasti-Dip: Plasti-Dip and rustoleum spray paint works extremely well on this foam. Follow the recommended steps of 3 layers of plasti-dip over an hour and the same for spray paint.As far as using it for its intended purpose... I did create a pair of shoes for my cosplay and I used this foam for my insoles. The foam is very comfortable to walk on and definitely feels like it will live up to its name.Highly recommended.

I bought this foam anti fatigue mat to sit in front of my CNC mill at work. It was to replace a much more expensive one that had become worn and full of coolant, chips etc. This mat is great for protecting my feet from the cold concrete and when it wears out, its not so expensive I cannot afford to replace it. Very happy with the product.

Unse them on the roof of my Rolls to protect from the hood while engine is rebuilt.Also on the entire table top of my work bench.

Bought two to use in a home gym. They arrived separately and have slightly different colors and corners (one round one more squared off). As far as function they work great they took about a week to completely lay flat after unrolling them and putting some weights to hold the edges down. They did stink for that same week but the smell fades. For the price I think they are a very good value and I would buy them again.

I have used these mats before and they are surprisingly tough and resistant to foot traffic. I linked 4 together to create a workout space and I'm very satisfied.

I use this when I crawl under the car to do repairs and maintenance.It’s a soft surface that protects my body and limbs from a rough garage floor. It’s not resistant to transmission fluid, so put cardboard under the drain pan.

very good material but a bit fragile, arrived packed in a huge box but still had a deep 1sqft abrasion scuff like it got stuck on a conveyor somewhere on it's way to final shipping - even though it's light, too big to return economically. it was also a bit stinky - leaving it out in the sun for a couple days aired it out enough to bring indoors and also enough time to remove the curl from being rolled up so tight. works well as a anti-fatigue mat but would have liked all of it arriving usable. cuts well leaving a nice edge and hasn't appeared to take a permanent compression set from several weeks of standing on it like some inexpensive fatigue mats.

This stuff works wonders. I initially used it to make some cheap clone trooper armor. It is just thick enough to maintain some durability, but it's thinner than the bulky square mats that are too hard to cut and heat form. I have now bought it a couple of times for a variety of projects. It's also WAY more for the price than alternatives. Great product!PS: I will soon upload pictures of the armor so you can see what one can do with it!

Have used this product to make a front mat for our Dodge Caravan a few times. Last about 3 years before the driver's right heel wears thru. Covers the complete area. Suggest making a paper template and cutting little bigger and trimming to fit perfect later.

The matting was purchased for a skid to raise my washer and dryer off the basement floor. I needed something that was soft but not mussy. This is perfect for my application. It reduces the noise. The wash machine doesn t bounce like it did on the cement floor. It also provides for a soft step to reach up to the upper shelves. The price was very good. For my application I am very satisfied.

I bought this for my workshop where I have to stand on concrete for long periods of time when machining. I found the mat slides around a lot and in fact is less comfortable than the 2' x 3' mat I had before. After a month its starting to get depressions ( I weigh 162 lbs) and it is very hard to clean as small pieces of metal get embedded into the soft material. Probably OK for non shop applications but not sturdy enough for me.

No muy buena calidad

Great mat, keep equipment safe and floor safe. Compared to the small square mats, this roll is better if you have to move your equipment you are not stock in cracks... it's a great piece.