Kraftex Copper Tape [1/4" x108ft, 2PK] – Copper Foil Tape for Stained Glass, DIY Crafts, Guitar Shielding, Slug Control & Faraday Projects

The media could not be loaded. It has adhesive on one side of the tape, and bare copper is exposed when you roll it up on a bolt shaft.The adhesive is thin enough that the thickness of the tape is similar to thin clear office tape.The bare copper has low static friction as shown in the video snippet.The thinness allows me to adjust the number of layers for a perfect bushing fitting.

Very good product.

I was hesitant to order this given some of the reviews that said the adhesive is NOT conductive. Willing to try it anyway because those reviews appeared to be copy/paste reviews for other copper foil tape sellers. Seems to be something not quite on the up and up there. Anyway, as soon as I received the tape i grabbed a piece of scrap paper to see if this would work. I am going to introduce a group of kids to paper circuits. I cut a pice off the roll about 6" long, then ripped the pice in half to get 2 3" long pieces. I stuck one piece down to the scrap paper and layed the other lightly crossing over the first piece. I did not press the second piece down any harder than I had to. I wanted to make the worst physical contact between the 2 possible. I then measured the continuity between the 2 with a Fluke DVM. The 2 pieces were electrically connected. I have no doubt this tape will work well for our paper circuits project.

Copper is a bit thin but the foil works well and the adhesion is excellent. The price is a bargain.

Used this copper foil with stained glass and it was perfect. I have tried many different copper foils and this one was one of the best. The cost was great ! Before purchasing I thought at that price it probably would not be that great but I was wrong. I will definitely purchase this copper foil again !

I used this to make snail barriers for my garden plants. Bought a roll of 8" wide galvanized sheeting, cut that down the middle to make 2 4" strips, and formed them into large circles to surround my tomato plants (pressing bottom edge into the soil). On each circle, I added a line of the copper foil about 1" below the upper edge, and another foil line about 1/4" below that one, so a snail crawling across those would encounter the edges of both. Checking for a voltage differential (like "tasting" a 9V battery), across the zinc/copper edges, gave a slight tingle which presumably would be noticed by a snail crossing those rows. And (as expected), stronger than doing the same thing using aluminum as a foundation. The snails didn't nibble my tomato plants, but I cannot be certain this was the reason. I'm happy with it, might test more thoroughly another year.

What a great value and price for these 2 huge rolls of copper foil tape. We just starting a stained-glass class and needed this to do our projects. We didn't want to invest a lot of money, so we were looking for quality and value. This tape definitely fit the bill. I couldn't be happier.

Would not recommend!Tears easily, not true to size, not7/32

As a hobby I build scenic slot car layouts, I used to use preformed plastic track such as Scalextric or Carrera.For the last year or so I've been routing the slot that guides the car and this double sided self adhesive copper tape is brilliant!It's so easy to apply and has excellent conductivity, best of all it is very reasonably priced and very durable.

Parfait pour vitrail Tiffany

Very good stuff, its adhere very well, I use it on many application for my 18650 battery DIY project.So far I'm pushing 9 amps on this foil tape 1 layer high and 3 wide and it work just fine small heat but just as expected for the current draw. This is a nice alternative to soldering wires. In some instance I also solder some terminal on the end of the foil and it create perfect joint.

Ho usato questi nastri di rame per comporre una vetrata con tecnica tiffany . Aderisce bene al vetro e si può saldare a stagno facilmente . Avrei apprezzato avere la parte adesiva di color nero da usare con vetri trasparenti .

Habe damit eine Uhr repariert. An einer temperaturempfindlichen Stelle konnte ich nicht löten und Silberleitlack klebt ja kaum. Also habe ich dieses Band ausprobiert und bin angenehm überrascht.Ich habe versucht, den Widerstand der Klebefläche mit einem Multimeter auszumessen, aber das ist natürlich schwierig, weil es auf den Anpressdruck der Messspitzen ankommt und natürlich auch darauf, wie groß die Messspitzen sind -- bei einer breiten Messfläche ist der Widerstand logischerweise geringer als bei einer spitzen Messnadel. Naja, also wenn ich die Messkabel beide auf der Klebeseite anbringe (d.h. der Widerstand fällt zweimal an, wenn wir mal für das Kupfer näherungsweise 0 Ω/mm annehmen) und beide eine Auflagefläche von (sehr! sehr grob) geschätzt 1mmx3mm haben, dann schwankt das Messinstrument wild zwischen 0,2Ω und 0,6Ω. Aber wie gesagt, verlasst Euch bitte nicht auf diesen Wert: Ich konnte die Auflagefläche nicht messen und das Multimeter hat ständig schwankende Werte angezeigt. Wer einen geringeren Widerstand braucht, sollte halt die Kontaktfläche möglichst groß wählen. Und es sollte jedem klar sein, dass man lieber Lötzinn oder gleich Silberleitlack nimmt, wenn man einen wirklich geringen Widerstand benötigt. Zur Reparatur eines Anlasserkabels taugt das Zeug natürlich nichts! ;-)Der Kleber klebt einigermaßen, vielleicht nicht ganz so gut wie handelsüblicher Tesa, aber brauchbar.Ich bin von dem Produkt begeistert.