POWERBRIDGESolutions ONE-PRO-12 Single in-Wall Cable Management for Wall-Mounted TVs, 12' Romex Cable - White

This makes the installation of that accessory outlet next to the TV on the wall a relatively easy to install option. Not for the absolute novice, but with some common sense and patience, almost anyone could install this outlet.Best Buy told me that it was against code to do this...which is wrong and I'm not certain what code they are talking about. But, this is why you don't ask an electronics store salesman information about electrical extensions.This is really nothing more than a sophisticated extension cord that is hard wired to the existing outlet. Everything you need, except for the cutting tools and screwdrivers is in the box.And, like I said, with patience and care, anyone can do it.Three words of advice.1.) Use a stud finder and confirm that you are not trying to put the box at a stud location. Most studs are next to the bottom outlet. Just go to one side of the outlet.2.) Confirm there are no air vents or possible pipes between the bottom outlet and the new outlet near the TV. Although it is unusual, I have hit a repositioned air vent that someone moved during a remodel.3.) Make certain you turn off the power to the outlet before hooking it up. Hot wiring is not a good idea.

This product is pretty cool. It works just as it says. The quality and simplicity really really surprised me. It’s a very well made product. The thing I liked the most was that the cover plate and box are all together. So only one step once you get the hole cut and the wires hooked up. The hardest part for me was getting the cover on the back that protects the connections. I used this kit to install a 50 inch tv on a swivel mount above a gas fire place. The nearest out was about 15 feet away and on an exterior wall. So I was able to just go threw the chase and exit it out on the side. Worked pretty damn slick. I would buy this kit all day and again and again. The instructions are on the product it’s self. When researching this product I didn’t see a lot of pictures on installing the kit so I decided to add probably way to many pictures so anyone looking can see how it works and how easy it can be. I bought the double outlet kit even though I didn’t really need it, but if I’m going threw the trouble of doing this then why not. Hope this review helps

This kit was a lifesaver. I was dreading mounting my projector to the ceiling because I would either have to run cables along the walls or hire and electrician to install an outlet on the ceiling, but even then I’d have to know exactly where I needed it. I was so glad I found this kit that allows you to easily set up an outlet and use power from another outlet. Once I cut the hole in the ceiling and wall I had this installed in no more than 30 minutes.

Works like it should and was easy to install

Easy Installation. Great quality. The precut romex is perfect for standard TV installations.I have installed about a dozen of these and haven’t had any issues on any of them. The only complaint I have is with the little screws they attach the cover on the back of each of the receptacles. You have to get the cover aligned perfectly to get the tiny screws to bite and tighten the cover over the electrical connections.

This product was easy to install, comes with plenty of wire, and decent instructions. This allows me to hide the cabling to my tv without violating electrical codes.

Works great - power, HDMI, and Cat 7 are hidden and tidy. My favorite feature of this system is that it allows you to insert whatever surge protector you want between your home's power and your TV/Soundbar (and easily replace the surge protector if it fries). The only negative is that if you already have a coil of Romex (or are having an electrician do the install) there is no need to buy an extra 24 feet of cable - buy another PowerBridge product.

Overall a good product. It is not a major issue but connecting the romex to each receptacle is a bit wonky. If you are good with your hands and have done electrical work it's not really an issue, but expect to spend several minutes on each receptacle to get the wires (3) securely terminated and the romex locked down in place per the installation instructions. In my case I had to use a 4" makita angle grinder with a diamond blade to remove metal from the TV wall bracket to accomodate the size of the box. As for cutting holes in the drywall the templates are a reasonably study card board. I used thumbtacks to hold it in place, check level, then trace the line. A $5 drywall saw makes the cuts very easy. The self locking mechanism worked very well on turning the set screws and secured the receptacles nicely against the wall and provided a very nice professional look. I'd definitely suggest you test the romex connections before buttoning it up to the wall just be sure you have a solid 120V connection. The upper receptacle does have an LED that turns on when power is present so that is a nice touch. One huge benefit of this product is that you can surge protect your TV (as opposed to direct wiring a 120V).

This was easy to install and does the job perfectly

Everyone should buy this if they need to conceal power wires for their TV and want to avoid opening up their drywall.

Best way to hide all your wires, great!!