Question 1

Did you have to bring the instrument in for initial adjustments (set the bridge, etc) or did you just play it out of the box?

Accepted Answer

I just read this review that perfectly answers all questions. It was done by J. Tant last September 10, 2015This is an instrument that I purchased to replace a Mendini MV300 for my oldest. The Mendini really required a lot of love to get it in shape to play, and though we got two years out of it, the instrument really started holding him back. Frankly, if I had it to do all over again (even not knowing if he'd like the violin or not...) I'd have gone with this rig.If you're here, it's probably either because the school year has started and it's time to find an instrument for your son or daughter, or perhaps you're looking to learn the violin yourself. I found buying to be more attractive than renting for various reasons. But we aren't here to talk about instrument economics. We're here to talk about the Cremona SV-175, which in my mind is an ideal beginner or novice level instrument. Further, with enough love, this instrument will likely carry the student through the intermediate level. It's really quite good.First though, is the obligatory word of caution: this is NOT a professional-level instrument. If you approach the instrument on those terms, you will be disappointed. It's not fair to judge by those criteria, particularly since Cremona is not selling this as a masterwork. No, this is a student violin, well made but nonetheless intended for students. It will not get in the way of the student trying to learn, nor will it encourage bad habits.Now typically, I shy away from buying complete all-in-one, accessory-laden packages. In the music world, while price doesn't always equal quality, there is a point where that doesn't really hold true. If you're buying a ginormous outfit at about the same price as a violin + bow from another maker, then you have fewer dollars going into the actual violin...and it will show. You want your money to go to instrument quality, which means good tonewoods like solid spruce and maple, ebony fittings like the pegs and fingerboard, and good craftsmanship and setup. The Cremona offers you that, at a pretty good price point.I had absolutely no problems receiving this via mail. The instrument was well-nestled in its case and packed/padded enough to prevent damage. Moreover, it looked as though someone actually did setup on this instrument (more on setup in a minute)...the bridge fits, the pegs fit, the soundpost was in place...so really, all I needed to do was tune it up, rosin the bow, and I was in business. As these were new strings (D'Addario Preludes), certainly they required a few days of constant tuning until they settled down, but settle down they did and the results are fantastic. Again, in this context, this is a very good instrument, especially after some time of regular playing to get it to open up. The tone is marvelous and certainly belies the pedigree of the instrument. It sounds great.However, this isn't to say you have nothing to do here. When receiving this or any other violin in this manner, PLEASE spend some time looking at the setup and take it to a professional luthier when you get a chance. It's a small investment but will pay dividends down the road. In particular, consider:-The peg box. If pegs are either slipping or are overly hard to turn (and I mean really hard) then either the pegs or the peg box holes are the wrong size/shape. The pegs should be conical and the ends should be flush with the peg box hole on the opposite side. If not, they may need to be reshaped. A lutheir can help with this.-The soundpost. This should NOT be glued into place, instead wedged inside the instrument. It should also be in a very particular place...if it's misplaced, the violin will sound flat or muted. Soundpost placement requires some specialized tools and knowledge, best left to a luthier.-The bridge. If you're handy with wood, you can probably do this yourself. Mainly you want the bridge to be standing straight up and perpendicular to the top of the violin. If it's leaning to or fro then that tells you it's in the wrong spot (it should be even with the little notches in the F holes) and the strings are too tight or too loose against the bridge. In addition, the feet need to be flush with the violin top with 100% contact, and that means they need to be cut so as to accommodate the curvature of the top. It may take a little fussing, but a properly-placed bridge makes a huge difference. it more efficiently transmits the vibrations of the strings to the body of the instrument.-The strings. I like the Prelude strings these come with, finding them to have a nice bright tone. They are steel core, so they will be lacking a certain warmth. So that said, I typically gravitate toward synthetic core strings, like Dominants (although D'Addario has the Pro-Arte line that are nylon core which I like very much as well). Strings are not a trivial purchase, so resist the urge to scrimp here...I think they are the component that has the single biggest impact on the overall sound of the instrument. Again, note and note well that new strings always require a breaking in period and will stretch over the course of days before settling down. You'll need to retune very regularly until they do.That isn't to say that there aren't *some* compromises here. The bow is functional and actually pretty good for a starter outfit, but it's not something that's going to last for the long haul. The case, on the other hand, is simply fantastic...it's sturdy with a nice big compartment inside to hold accessories like extra strings, rosin, a tuner, etc.So to conclude (and I'm sorry this review is stretching on so long): I found this to be a simply fantastic instrument for the student, quite probably one of the best offered. And I say that knowing full well that it's made in China - but it's made with care and attention and craftsmanship, so that pedigree doesn't bother me one bit. This isn't a hastily-made, mass produced Violin Shaped Object. Varnish is appropriately applied and the instrument overall does not have any chips, cracks, loose joints, etc. The tone and playability are right on, so much so that this will encourage the student to learn and learn properly. It's simply a very good violin.

Question 2

Where this violin made in?

Accepted Answer

The violin is made in China by a reputable 45-year old company Saga Musical Instruments in San Francisco. For over 35 years, Cremona violins have proven to be the best choice for students.

Question 3

What's inside the box? Does this come with a case?

Accepted Answer

Yes. Comes with a heavy foam padded case and a bow. Jay DreherPlayBetterBluegrass.com

Question 4

Hola. Quería comprar este violín pero antes quiero escribir a Cremona para asegurarme la garantía. Estoy buscando mail de contacto y no encuentro.

Accepted Answer

Thanks for your interest.  Please feel free to reach out to us at info@sagamusic.com!

Item Weight	476 g
Product Dimensions	59.69 x 20.96 x 9.53 cm; 476.27 g
Item model number	SV-175
Back Material	Maple
Body Material	Maple
Color Name	Natural
Fretboard Material	Ebony
Item Styling	Fitted
String Material	Perlon cores aluminum wrap
Top Material	Spruce
Neck Material Type	Maple
Number of Strings	4
Material Type	Wood
Size	4/4

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

Cremona SV-175 Premier Student Violin Outfit - 4/4 Size

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions