Musiclily SSS 11 Hole Strat Electric Guitar Pickguard and BackPlate Set for Fender US/Mexico Made Standard Stratocaster Modern Style Guitar Parts,4Ply Black Pearl

All the screw holes were dead on. Fully shielded. At first when I ordered it, I wasn't sure if I would use it on my American Stratocaster, but I was impressed 👍

Very nice it fit my strat player series perfect and it's beautiful 10 out 10

Exactly what ordered,great product.

Easy way to change the look of a Squier SE Strat. The pickguard is very well made, looks like OEM and fits great after trimming.During to install I replaced the anorexic Squier bridge to a high-mass MiM Tremolo bridge at the same time and discovered the guard would not lay flat. It should have fit but it did not. I'm not sure, and didn't care enough to check, if it was the result of the bridge swap or the guard being out of spec but I had to shave 1-2 MM so it would lie flat. It was very minor and just part of the fun of swapping guitar parts. I still rate it 5 stars because of the quality and overall result.

I only ordered 1 pick guard and back piece. I have got 3 now. Only ordered 1

Bought to put on a cheap Chinese made Squier Strat. Overall pretty good fit but a lot of the screw holes were missing the countersink so the screws didn't fit as they're supposed to. Also was missing the holes that the volume and tone knob pots fit/secure into. It was all a pretty easy fix with a drill and drill bits, but wasn't expecting to have to finish the factory work myself. The second picture shows the holes I had to drill or modify. Overall works well enough - cheap pick guard for a cheap guitar!

Not made for Made In Japan Strat. One hole is off all others fit. But still looks good. Should have read the description but still really good.

This pick guard matched up perfectly with my player series Stratocaster. All hole sizes and positions were exactly correct. The white pearl that I bought was whiter than my knobs and pickup covers, but I still think it looks great. If I bought another one I might try the parchment pearl though.

At first when I was installing this pickguard I was thinking this is really good for the money and continued. I decided to take the film off before I fitted the knobs etc. It fit really well. I was noticing some marks and a tarnishing on the face. Nothing major again for the money so I continued. Once I was finished I thought I would give it a wipe to polish it up. But it wouldn't polish but kept leaving more tarnishing and generally could not get a clean finish and just got worse the more I polished. (this is the black pickguard) I also notice what looked like some tiny piece of aluminium foil on the surface so tried to pick it off but it wouldn't budge the more I tried to move it the worse it got. It was a scarring on the surface, a little hole. But more puzzling is the black surface is white underneath so now its left a damaged mark that is seen because its white under the black surface but the surface of black is at least 1mm thick! Where I have tried to rub it clean it just gets worse so really disappointed. I might have to put the original back on and throw it in the bin.UPDATE! CHANGED TO 5 STARS. After a day or so I noticed a tiny bit of a fray of plastic at the edge of the pickguard. I started picking it thinking I would get it to come off. As I picked the more it peeled away until I realised it was the actual plastic protection of the pickguard. Once fully peeled it revealed a shiny new pickguard! Problem solved! The problem was I had already peeled of the plastic film when I fitted the pickguard. The finish was so flat and without bubbles or loose edges that I assumed that was the finished surface so it had two layers of film covering for protection. It fit perfectly on my MIM Fender. I highly recommend this product. It now looks great. For the money definitely 5*.

Nicely presented complete with screws and a couple of branded plectrums which was a nice touch. The plate isn't dark black, more a sort of dark charcoal, but that's pretty much as it appears in the images and actually adds a nice little contrast with the guitar's finish. I had to drill a couple of holes in the guitar and three on the plate itself next to each potentiometer hole as my pots have little bits which need to poke through next to each pot base, not sure how common that is. I ordered dark dials too and I'm very pleased with the result, it looks dark, mysterious and menacing!

Fit my Squire ok, with very minor adjustments on 1 screw, All else lined up. Back plate was a bit bigger, but lined up with holes leaving more of a gap on near the tremolo system but enough space to squse the strings through when changing them without taking off/ Didnt want to re drill incase I want to change back over again. best of both worlds so All Hunky Dory.Good quality pickgaurd and backplate-double plastic protector film on mines. Also comes with good Shielding on the back of pickgaurd.Thanks!

Colour: TortoiseshellThis is great quality, the cuts are clean and consistent with a smooth edge. The back has aluminium foil for grounding and the pickups and hardware all fit without issues.I installed it on a Squier which used to have another aftermarket pickguard so I already had a few more holes, than from factory. However, none except one lined up so I had to fill them and drill new ones. I'm not taking a star off for this as it wasn't specifically advertised for Squiers.However something I wish was improved is that while the holes that mount the pickguard to the body are all countersunk, the pickup months are not. Aside from aesthetics, this caused an issue with the volume knob where I couldn't fully turn it as it got stuck on the screw. I uploaded an image of the screw after I countersunk it. Not a huge thing but it really wouldn't take much to do at the factory.Overall really happy as I'm in love with how the guitar looks now.

I ordered this aged pearl pickguard and backplate for a special Fender Strat build. My flamed sunburst body had not been drilled so the pre-made holes in the pickguard were my perfect guide for the screws. I intentionally didn't fit this until after the neck and (Wilkinson) Trem bridge were in place and all that was required for a snug bespoke fit was just a little bit of filing and sanding to get the shape around the Trem just right. This pickguard is superbly made, beautifully bevelled and came complete with 2 (yes 2!!!) cellophane protective layers on both the pickguard AND the backplate. I think that this is as good as anything Fender can supply but at less than half the price. I was aiming for a finished Strat appearance close to Fender's recent 'Magnificent 7' Flame Sunburst Elite model. Having bought genuine Fender aged white knobs and pup covers etc. I think the finished article is beautiful and now I have a totally magic Strat. I'd recommend Musiclily's product to everyone without reservation.