Hunter59244 Dempsey Ceiling Fan 44 inches Fresh White

I've had this fan up for over six years (from 2017), and it's still really awesome. I had a Hampton Bay fan up before this one, but the pull chain mechanism stopped working after two years (par for the course for Home Depot brands). Before I settled on this Hunter fan, I looked at 43 other models:2 Craftmade,8 Emerson,2 Hardware House,18 other Hunter,6 Litex,2 Minka-Aire,3 Monte Carlo, and2 Westinghouse;as well as a bunch of Hampton Bay and Harbor Breeze (Lowe's brand) fans.I compared the fans' diameters, heights from the ceiling, airflow/cubic feet per minute, number of blades, Amazon ratings, price, and light type and remote (if applicable).Admittedly, this fan is only a 44"-diameter fan and pushes 3,157 CFM--far less air than its rivals (which pushed an average of 4,692 CFM with an average 49" diameter blades). The only slower fans were the Hunter Low Profile III (#23866), Low Profile III Plus (#53075), and Low Profile IV (#51059). The highest CFM were the Emerson Midway (#CF955WW) at 6,085 CFM, the Emerson Sea Breeze (#CF654WW) at 6,492 CFM, and the Minka-Aire Ultra Max (#F588-SP-WH) which puts out an insane 7,077 CFM (and gets nothing but five stars on Amazon but doesn't have a light kit). HOWEVER, that said, THIS FAN still moves plenty of air in my ~130 sq. ft. bedroom. And when I need a slight breeze, it delivers. Sometimes I wish it could be even lower.This fan sits 12.4 inches from the ceiling to the bottom of the light. The tops of the blades are about 7" from the ceiling at their base (5.5" under my medallion) and 8" at their periphery. This is average for the other models I looked at: a generally-even spread from 7" from the ceiling. The Hunter Low Profile III (#23866) and the Emerson Snugger (#CF804WW / CF805WW) were the lowest-profile, and the Hunter Astoria (#53059) and Beacon Hill (#53081) were highest-profile.This fan won out over the others mostly because it has an included light kit with *dimmable LEDs* (on a standard Edison base, not a candelabra base) and a nice three-speed REMOTE—I didn't want to worry about compatible light kits/remotes after the fact. It's just so convenient to have the speeds I want at the push of a button (not a pullstring!), and to be able to dim the lights with the remote. However, with the LED lights I've installed, there's a slight high-pitched whining noise when the lights aren't at full brightness. (It's the only way I know they're at full brightness.)The fan is perfectly balanced too. Installation was easy enough—even with a ceiling medallion. I had to carve the backside of the medallion to fit around the top canopy and sandwich it around the fan as it was being assembled and hung. This required bending the 90° metal resting hooks down a little with pliers--the elbows still angled at a 90° but pointing 45° down toward the floor then curving backup toward the ceiling to make a V). Then I slid the fan+medallion onto the top canopy horizontally and secured the screws while a second man held up the fan.OK, so this fan is great … BUT it gets a star off because:*The instructions don't tell you to secure the fan directly to a fan-rated electrical box. This fan has a metal plate with rubber feet that rest on the ceiling, and the instructions imply you can secure the plate to the ceiling and the canopy to the plate alone. But I know better, and Hunter really should have specified how to use a fan box and/or a brace for first-timers.*The balancing kit included also has poor directions. There's not really a need for a balancing kit with 99.9% of installations, I reckon, since the fan has those rubber feet to avoid jiggle. But the instructions don't explain that there is a balancing kit or what it does. They don't tell you that the balancing kit is for light wobble, not blade wobble. And they don't explain thoroughly the many places to try the clip in the balancing kit or that the weighted stickers go above the blade (not its underside). A couple more sentences would go a long way for first-time D-I-Yers.*Some of the holes for the fan blade screws were poorly drilled--too much paint or too dull a bit at the factory or something. I nearly rounded out some screws securing the fan blades. Luckily they included an extra screw, which helped; and I used another screw I had (same width and threading but longer) to widen the pilot hole first. But that could be disastrous for other customers.*The included LED bulbs are 800 lumens and 3,000K color temperate, which is a very blue light. The bulbs aren't very bright, and while the blueish light is great, it made other room in the house looks like a red-orange hell by comparison. Different bulbs fixed the problem, but I didn't want to have to hunt for bulbs to fix something I just bought.*The fan includes a notice that Polywell Manufacturing (Zhongshan Co.) made the ceiling blades with medium-density fiberboard (MDF), which complies to phase 2 of § 93120 ATCM Emissions. Researching what this means, I found info that MDF uses a type of formaldehyde that's a known carcinogen for nasopharyngeal cancers, and there was an Airborne Toxic Control Measure (ATCM) to reduce it. MDF is common, but not ideal. I'm not a ceiling fan manufacturer, so I don't know what else could be used.*The Safe Exit feature dims the lights gradually over 30 seconds and turns them off, which would be really cool when getting into bed or turning out the light when I'm done reading, etc. Except both bulbs flash their full brightness off and on three times first, which wakes me up when I'm trying to get to sleep. Why not just have the remote LED flash? The remote LED is pretty bright too, incidentally. I have two dot stickers over it.*The switch to reverse the fan's direction is under the glass cover. I like to have the fan blow air down onto me sometimes and suck air up to distribute it throughout the room better at other times. But I don't want to get a stool or chair and remove the glass several times a day for this. So I just leave it blowing downward.

Purchased this fan back in 2018. I’ve uninstalled and reinstalled it four times and it’s still running great! Bought a second one last month and unfortunately one of the pieces was missing and another was broken. I contacted Hunter Douglas directly and they made everything right. Very pleased with their customer service.

I wanted to give this 3 1/2 stars, so I gave it 4. I had this professionally installed. Installation was easy according to the installer. The Electrician was only here just less than an hour. It was easy for him because the center of the room there was an existing recessed down light, so he didn't have to provide power to the fan. Fan is relatively quiet. My opinion the remote control is cheap and does not provide a button for Reverse. In fact the Reverse button is mounted Under the light lens. So you would have to get a ladder and remove the light lens to use the Reverse button. Why they did this is Beyond me. Also Hunter doesn't provide a wall bracket for the Remote control another minus in my opinion. Another Minus is that Hunter's picture makes the metal, brushed nickel much more Shinier than what it actually looks like, see photo. Also the HUNTER LOGO is Much Uglier than the Scripted Hunter Logo shown in their photos. Other than that it runs smoothly and quietly. Seems Hunter is cutting corners with quality.

The reason I buy Hunter is because they out last their ten year warranty. The one fan I had a problem with, Hunter sent me a replacement. This one is smaller 42" but the output on high is well enough to cool our large bedroom. The only thing I don't like is that this fan is not reversible.

Es bello y funciona bien

The media could not be loaded. So on max setting this makes humming noise that earbuds can't block out. It's sooooo loud.I called customer support as it is brand new and immediately they tried everything in their power to tell me that they can't honor the warranty.Like it was their main goal was to get out of helping me.So I made clear to them that everything was wired to one standard, non dimming switch and that I also have a nearby floor lamp on a separate switch.I think they misunderstood me because I can't imagine anyone being this purposefully dense but they started on repeat telling me warranty is voided over and over because I'm only allowed to have one switch in the room. I tried explaining that everything was on one switch but they took me having a floor lamp on a switch as a reason to void a warranty? And they criticized me saying 'this is why an instruction book is in the box, you have to follow it and you didn't, it says clearly only one switch'First of all, no, no it didn't say anything about only being allowed to have one switch in a bedroom, I double checked too because this was so outlandish to say to me. I even checked the website and everything we did was according to the instructions too. Even watched all the YouTube videos and took it down 4 times to check and make sure everything was perfect while we troubleshooted.Customer support was useless, they would not get off this power trip of telling me warranty was voided over and over and talked to me like I was a child for 'not following instructions about the light switch'. It felt like it was not in good faith and their end goal was to just not honor a warranty no matter what. It was really uncomfortable and felt insulting.Anyways, maybe my experience might help someone because now I'm out this money as it's just not worth suing over obviously.

Exactly as advertised