PIT66 Lockable Truck Bed Storage Toolbox Compatible With 2002-2018 Dodge Ram 1500 2500 3500, Box Swing Case, Drawer Left Driver Side 2 Pcs

Instructions:1) Product comes with spare pieces. You will need two nuts and six self tapping screws from each accessory pouch. These are both 10mm.2) Assemble bracket by attaching two pieces with two 10 mm nuts. Lock tight if desired.3) Assemble box onto bracket. Close and fully latch.4) Tighten preassembled 10 mm nuts holding latch.5) Align bracket and attach with six 10 mm self tapping screws. There is plenty of room for adjustment. A couple inches from the bottom of the bed will clear most covers. Square bracket with bed of truck.6) Assemble box onto bracket.7) Optionally bed line bracket and hardware for additional durability.Pros:Fits under a bed cover.Two boxes make for additional organization.Large enough for tools, rescue equipment, tow equipment.Fit and finish is acceptable.Cons:Attaches via screws in thin sheet metal.Plastic boxes not as large as typical bed boxes.No where near load rating of a diamond plate box nor durability.Overall I am pleased. They hold my shackles, jumper cables, tow strap, and tools well enough. Very nice looking setup. Much easier to utilize than the box in the bed. Even more so on a heavy duty truck.

These arrived individually packaged. All the necessary hardware came with and even had some spare parts, very nice. They don't include instructions or visual instructions, not nice. I have a black PVC bed liner so that presented some additional challenges. I could not get the plate to line up flush as the bed liner had curves where the metal was flat. I grabbed my dremel and cut the bed liner where I thought I needed to access. The 1st side was a questimate and luckily it came out good. The 2nd side was much easier as I just copied what I did on the 1st side. Don't cut the metal, take your time and pull the bed liner away as you cut. We'll I think the results were very good. I have a 3 leaf hard tonneau cover and the storage bins fit with room to spare. Be sure your latches clear or you'll need to get some shorter latches. I had to switch out the middle with the rear to clear the boxes. If recommend this product. The install wasn't too complicated and it can be done with 1 person. I used a ratched, drill, and 2 pieces of 1 in thick pieces of wood to raise the boxes off the bed deck. Good luck

I like these boxes. They take up mostly unused space in the bed and leave the main bed open.I have a longed, and they didn't have brackets for a long bed. The seller was willing to return the boxes, but I decided to extend the brackets. Pretty easy, the only modifications to the original brackets were to add 2 more holes for support bolts.The boxes don't carry as much as a cross or chest box, but since my truck mainly pulls a trailer no big deal.If pulling a gooseneck or 5th wheel, a 90 degree plug may be needed. I found a 90 degree extension on Amazon that works just fine.I had one captive stud for the catch sieze with the factory paint, and come loose. Fairly simple fix, just cut it the stud out, drill and insert a bolt to support the catch.Since TEK style screws are used to mount this, I would suggest some silicone in the holes to prevent corrosion.Note: one of the few things I've bought that actually comes with extra hardware. Very nice if something goes wrong or gets dropped/lost.

This product is constructed strong but should have a weight limit what u can put in it.locking mechanism is week and dose not always catch.

No problem going through a car wash. But Nebraska humidity soaks right through. Everything is rusty and musty

This is an amazing buy. Very easy to put on. The only problem was left side wouldn't latch... easy fix though I took a Dremel and sanded down the plastic. It fits perfect now.

It would be nice if they were keyed the same. They also didn't have directions, but were easy enough to figure out

Directions would be nice so you know measurements to mount. Otherwise it’s mock-up work. Requires bracket modification for 2012 Ram 2500 long bed.