🚗 Charge on the Go: Power your adventures with ease!
The PNGKNYOCN12V DC Car Charger is a robust 4.9FT power supply cable designed to connect your devices to your car's cigarette lighter. With a 10A built-in fuse for safety and an LED indicator for operational status, this cable is perfect for powering cameras, refrigerators, and other electronics while on the move. Compatible with DC 5.5mm x 2.5mm connections, it’s your go-to solution for mobile power needs.
J**Z
THE 90 ° ANGLE PLEASE.
HELLO I NEED 1 WITH 90 ° DEGREES ANGLE THE ONE YOU SENT FITS BUT DON'T WORK BECAUSE HAVE TO BE A 90° ANGLE PLEASE HELP ME WITH THE RIGHT ONE OR I NEED TO RE TURN THE ONE YOU SENT ME THANKS FOR UR TIME.
K**R
Works But Fragile
The first one broke after not much use. To be fair I did buy another of the same one.
L**S
Works well
I tried this to find out if it would work with my T-Mobile trash can. To my delight, it did. I'm very happy to have internet service at home even when the power is out. I can just run this out the window and leave the modem on top of the car for hours with minimal power drain
A**R
One Glaring flaw....the spring
The product seems to be well built however a particular flaw makes the product unreliable. There is a spring in the end of the unit. This is typical of all car chargers. However, the tension on this spring is too much( the spring is too rigid). When I plug the charger into the device, in my case a EcoFlo River 2, the tension from the spring pushes the charger away from the end (back) of the port. This causes an unreliable connection and I get intermittent power losses when there is any pressure at all placed on the charger or the charger wire. This makes the product unreliable due to intermittent power losses. The spring on the charger should not have enough tension to push the charger out of the plug once inserted but this one does. I highly recommend choosing another charger until the manufacturer replaces the spring with one that will not push the charger away from the back of the plug causing intermittent disconnects.
H**B
Spring rate of the spring behind fuse too high.
The spring rate of the spring behind the fuse is too high and ejects the 12V connector out of the socket this cable is plugged into. I have seen many of other these Chinese plugs that are made with too much force of the spring behind the fuse or plunger suffer this flaw. This design needs work to be reliable. If you have parts and general know how of the mechanics you can modify these cables to work, but why can't the manufacturer fix their problem in the first place. Shop around and buy another or build your own. These cables are too unreliable
D**R
Good quality
Good quality
D**R
Received 5.5 x 2.1mm plug
Looks ok but wrong plug it's 5.5mm x 2.1mm not 5.5 x 2.5.
G**O
Worked well
Works well, used to power a meter from my vehicle.
C**A
Connection fit.
It works but connection is sloppy had to use a crimp tool to firm up connection.
Trustpilot
1 month ago
1 week ago