DIY-MotoShield Pro Premium Nano Ceramic Tint (75% VLT) 30” in x 5’ ft Roll | Professional Window Film for Auto, Reduce Infrared Heat & Block UV by 99%

I bought this 75% VLT UV blocking film for my van side windows. The tint is quite minimal and will not interfere with night vision in the side-view mirrors (critical). My windows are "full frame", so installation was a bit tricky. I cut paper templates, then first-cut the film 3/8" outside the boundaries of the template. It worked except the vertical length was actually exact. Do over would be 3/8" on the sides and 3/4" top and bottom; that way there's some extra to trim off the top edge to get a perfect fit at the top of the glass. Otherwise, do what the videos show: Lots and Lots of spraying of soapy water; then squeegee like a mad man! ;-).In the end, my installations look professional and really are much cooler and more comfortable in the hot Arizona sun!

I used this film to tint East and West facing windows on my coffee shop. I was skeptical that this would be as significant of a difference, but just doing a basic test with 2 windows side-by-side you can feel a significant reduction in heat. Not sure if it lives up to the rated "99%" IR rejection claimed, but significant enough for me to leave a positive review. If you are after heat-rejection, I don't think a more expensive film warrants the price when considering the performance of this film.The tint cured to be clear, with a distinct blue-ish hue. I wish the film was less blue, but once all the windows are tinted, the blue-ish hue does not stand out as much. The adhesive did not grab as easily as I would have liked. Was a little tricky to get it to tack up with my slip solution. And the backing was a little tricky to remove. But minor con's for an overall good product. Did not have to shrink any windows, so can't comment on that.I also tried their 50% which has a pleasing charcoal tint, with a slight brownish hue but much more pleasing. 50% IMO is perfect if you want a slight reduction in brightness and harsh glare and is what I will continue to use.

Very happy with quality of the tint. Easy to work with. Easy to shrink. No discoloration.

I never used the product because I ordered too light of a shade. Definitely has a blue hue to it.

I had this professionally installed by a local tint shop, and after they put it on he made a comment that this wasn't the rated for the heat blocking that it is advertised for. I took my car and backed it out of the shop and sure enough it didn't feel any different. You still felt a tremendous amount of heat pouring in through the window. Decided to give it a chance before changing. I have had it for close to a month now and it still is hot. Set up another appointment to get this junk pulled off and some legitimate ceramic tint put on. Do not recommend

Good film but it's BLUE. The add never mentioned that or I would have given a higher rating.

Easy to install if you know how to install tint

I had a professional install this kn my vehicle and he was amazed with how thick it was. It definitely removed the heat coming into the vehicle from the sun compared to the previous tints. No need to put a cloth on the leather seats.

Honestly, the film is mediocre at best. It wrinkles easily and is difficult to work with. I purchased this one thinking it will be a big upgrade compared to the film sold at Canadian tires. However, the film is just as bad, but costs a lot more.The look from the outside isn't too bad but from the inside the film isn't as clear as expensive films. So, would I purchase this one again? No!