VEVOR Slip Clutch, 1 3/8" PTO Slip Clutch, 6 Spline Ends PTO Friction Clutch, Carburized Steel Tractor Slip Clutch, Adjustable Rotary Cutter Slip Clutch, Black PTO Slip Clutch Spline for PTO Shaft

Added to my 6ft Tractor Supply Countyline rotary shredder and it worked great. The best thing was the price, can’t beat it!

After many shear pins on the driveshaft to my bushhog, I decided to try installing this unit. To date, I have not had one shear pin breakage. Recommend this item for all heavy duty equipment operations. It will save you time and money.

The product whorls great and now I quite breaking the sheer pints due to the force before when I would turn on the PatO. The only issue I had was the box was not in great shape with no packing in it and there was a bur on the shaft that I had to file down to side it on the shaft.

The first one I ordered never got here- stated it was damaged in shipping(!). Must have been the box because this thing couldn't be damaged if dropped from a three-story building. But Amazon was very helpful assisting me to reorder. I was glad I ordered it on Amazon instead of elsewhere as they have always been great with missing or damaged shipments. I have it installed on my 5' rotary mower, but cannot use it until the current weather does not favor wildland fires. I will be using it mostly to clear small brush. But I did a test run and it rotates smooth and true with no problem. A couple of tips: - If you are installing it on an implement with a plastic guard around your current, 'un-clutched' coupling be aware that you will need to order or fabricate a new guard. I had to purchase a universal guard to replace the original 8" guard. I was able to get it a our local farm supply. It was a universal 8-10-12" guard that I had to cut down to the 10" section. Check, as the one I got only had one access hatch! I had to cut a 1.25" hole in the opposite side to be able to use two ratchet wrenches to tighten the bolt on the implement end of the clutch. I bought a rubber plug to cover the hole after installation. - The accurate adjustment of the springs to allow the clutch to slip is not easy. measuring the length of the springs to the rated lengths is difficult. They should have given the measurement of the spring length to the top of the washer under the nut instead of just spring length. To deal with that I set them close to the specs for my tractor and from there loosened them about 1/4 turn. Additionally, I used a sheer bolt instead of the supplied bolt.. just in case.- Finally, be aware that it will shorten the distance from the implement to the tractor's PTO output shaft. Make sure you measure the overlap of the two parts of the PTO shaft before putting the implement to work!

Bought for brush cutter, was shearing bolts left and right. Use this and have had no more problems. 55hp tractor with 6 foot brush hog.

There was no instructions on how to use it do I adjust it before putting it on or how to adjust it or what Gap do I use there was no paper in the Box whatsoever on what to do

What a wonderful device! I've had the snowblower destroy the tractor transmission twice before on this gravel road, but with this slip clutch, I went through the whole winter and didn't even shear the shear pin!

Ordered this and installed it on my KingKutter brush mower pto shaft. It was a tight fit getting it installed due to the length of the pto shaft, but i was successful without shortening the pto shaft. The diameters of both the shaft and bore were spot on with no issues and no slop when assembled. The factory setting was set for 45 hp according to the photo attached to the ad. The spring compression i measured at 18.5mm. I chose to leave it set for 45hp. The tractor is rated at 35 pto hp. It took about a week to get it from when i ordered it.This has totally resolved the problem i had with breaking shear bolts. Prior to installing this i broke 4 shear bolts in 3 hours of mowing. I love this and wanted to give a good review. I took a chance with a product that had no reviews and was not disappointed.

I just received my VEVOR Slip Clutch and it appears to be as described. - BUT where are the extra slip clutch disks that other customers say should be included. Some customers state they received them and some of us seem to be minus them. I probably will never need replacements because most of rocks have been removed from hunt camp property and was just sick of replacing shear bolts. Jury is now out to see if it fits which it prob will - just super pissed that it didn't arrive with everything!!!Well its fits quite well but haven't started it up. Still trying to contact Vevor but if you didn't order it directly from them "good luck". Its still 400 bucks cheaper than buying something here!!!