DNA Motoring HL-OH-CS03-4P-SM-AM Smoke Lens Amber Headlights Compatible with 2003-2006 Chevy Silverado/Avalanche

Packaged really well, direct fit everything lined up just fine on my 2004 cateye. Have a very good look to them

I had problems with another set of Headlights I bought from DNA where the mounting tabs on your product easily broke and moisture getting into them, wasn't sealed correctly and these lights look really nice but another tab broke on these as well not as strong as you are advertising!I'm not going to be buying a third time with you... lesson learned! Oh and I failed to mention on the other lights where the locking pin goes through, the holes was not big enough for the pin to slide through! Cheaply made products and charging to much!

Fit perfectly and looks good

Amazon specials, I didn’t expect OEM .Not the highest quality. Bulbs fit loose on drivers side , passenger side I could barely turn them. Passenger side had a broken trim ring for high beam twist right out of the box . A few issues I had to work out with alignment tabs as well.Drivers side I had to trim the tab for the alignment pin to slide in. Wouldn’t line up. Took 1/8” off the back side to make it work.Overall , I’m happy just because it looks so stellar . Considerably lighter than stock . Do not feel as sturdy .

They were packed well and look insanely awesome and make the truck look new. Old school people know that "repops" are not OEM so alot of reviews are from princesses who expect that. These are the cheapest ones out there and are 99.9% perfect. The only issue was the marker lights popped in just fine but I could tell they would pop out due to the weak clip. No big deal... I ran a thick bead of high strength adhesive along the clip seam, other people zip tied them. Worth the effort and everything else was impressive. Another review said you have to remove the grill to replace the marker lights but that is incorrect. Remove the headlight first and you have plenty of access to remove the marker light. Complete replacement of all four is literally 5 min. I painted my faded grill also and did not even need to adjust the headlight beams. Pictures are worth a thousand words so here is my before and after.

The media could not be loaded.  UPDATE #2: 14 months and these are horrible. The entire lens surface is crazed. I am running standard bulbs, nothing that should be causing a heat issue.UPDATE: 11 months with these lights and I am disappointed. The lenses are breaking down and have some sort of glazing occurring (see picture). What started out as a good looking product, with some minor fitment problems, has become a waste of money.I installed the "smoke" version of these headlights in my 2004 Avalanche. The lens tint is perfect, just dark enough to give it a little attitude but doesn't diminish your headlight efficiency. They fit into place well but need a little tweaking.The upper assemblies have no issues.The lower assemblies have 2 issues:1. The forward turn signal light does not fit tightly like the others. I can see how these would fall out. I remidies this by running a strip of vinyl tape around the seal to help lock it in place and prevent moisture.2. The mounting clip for the outer edge does not lock securely. Using the pin that hold the upper assembly, I spread the plastic clip open while it was in place to help it expand better. This improved the fit and should be fine. I fill probably figure out placing some foam/rubber into that spot to make sure it stays spread and locked.A final note on moisture. It seems that the most common problem people have on the '03-'06 Chevy' s is moisture getting into the bottom left assembly (driver side). If you have this problem, it is most likely the small marker light that is allowing water in. Mine had obvious moisture around its seal. I recommend either running some good vinyl tape or even silicon around all of the sockets.

Good product with quality, appearance, and as described. Would buy again.

I ordered these headlights and while I was very excited to install them, simple and took all of 15 minutes to swap out. Pros: Easy to install, initial quality was as expected and seemed higher quality than most aftermarket kits I've seen.Cons: The Headlight "projector/reflector" is incredibly uneven after post adjustment. The sealant was applied poorly which left lots of residue on my vehicle and hands. The parking light assemblies do not stay in place for $h1t. I had a replacement sent due to: 1) the fact the drivers side lights would pop out and dangle in transit and 2) the reflectors inside the passenger side parking lights was flaking off and looked like crap. Worst part is the replacement was not much better. Now the opposite side parking light assembly pops out in transit at times, and the projector for the headlights are still very poor and adjustments do not make much improvement.

Facil instalación, recomendables

Great headlights for the price!! I’ve had no issues with these, they fit great and look so much better than stock. Low beam light is a little distorted but I’m sure you could fix that with some adjustment. Definitely would recommend!UPDATE:Been a couple months now, and so far I’ve had 2 minor problems for me, might be bigger for some others. The drivers turn signal light started to get moisture inside, and the clip broke on it. I rigged it back up and hasn’t moved since, but the moisture is kinda annoying. Besides that it’s holding up great. 3rd and 4th photos are after a couple months!

Fit good and look good in a 2004 chevy 1500

Buena calidad , envío rápido