AUPET Water Bottle Bag Carrier,24oz/32oz Insulated Neoprene bottle Sling Holder Case Pouch Cover for 1000ML/750ML Bottles with Shoulder Strap for Girls Boys Adults

UPDATE:So, I wrote the review left below a few months ago and drove on with my life. I AM leaving the original review for reference though but, I do have to say that it has indeed changed drastically.See, given that the item in question was only $11, I didn't think much of it falling apart on me or my original review. I bought it, it broke, I moved on.Until I get an email from the manufacturer.According to the email, not only were they refunding my money after having seen my review BUT (and this is with no snark whatsoever the good part), they had made improvements on the design and wanted to send me one of the new models to see what I thought.Okay, 1) Wow. Just wow right there.I mean it too because, who in the heck really bothers with that kind of thing over an $11 bag? It's not like they weren't still at 4 stars and, as mentioned in the original review below, I really didn't bother to try to get a refund.So, I said: Okay because, frankly, that kind of conscientiousness deserves at least a few minutes to see what they did.Sure enough, a few emails back and forth and the refund came through with lightening speed and they emailed me to make sure. I mean they were all over this thing. Again, $11 bag but they were on top of it like it was some custom designer piece.Of course, by this point I was actually getting a little nervous on their behalf but, there was no way that I could find fault with their attention to detail. Regardless of all of this however, I was actually even more resolute in my decision to give an honest and thorough critic on the new design because, imho, that kind of thing requires nothing less than full honesty. Anything less would be an insult to the person asking the question.So the bag came in and I pulled out the magnification glasses that I use for sewing and took a look.Thankfully, for everyone involved, it is indeed better.The problem with the strap seam that I mentioned in my original review has indeed been fixed. The part where it is sewn to the sleeve itself has now been fully doubled over and even feels like from the corners that I can touch that some form of unraveling adhesive has been applied.Heck, the double over is even off center towards the bottom so that the weight of the bottle will distribute across the seam better and, on top of that, it appears that they actually french rolled the seams where the straps are sewn to each other (they've been folded twice to prevent unraveling and iirc it was originally just folded once).Also, while I can't remember whether or not the strap was sewn to the sleeve with an X inside the box seam pattern originally, it has been now in order to further stabilize it.So, I am tickled pink because, this is just a level of detail that.... wow. And, all of this fuss over an $11 bottle bag.So, they were curious to know what I think and this is what I think:I see absolutely NO reason why this bag shouldn't hold for a very long time to come and I am beyond impressed with the conscientiousness and attention to detail of the manufacturer.I mean, yes, it was smart of them to track down a critic with specific complaints to see if they had been addressed properly in the new design. BUT I have also seen a good number of high priced luxury items where the manufacturer would never have bothered to even change that design much less get it checked out by someone who didn't like the original one. Particularly when there were still a bunch of glowing reviews still up.So, yes, it's a water bottle bag. It's an $11 water bottle bag at that. But, I am impressed. You did good guys. Thank you. You definitely definitely went above and beyond imho and, the new design is great.ORIGINAL REVIEW (only left for reference- see UPDATE above)So, I order this thing. It comes in and seems to look fine. Next morning, I fill up my water bottle, put it into the sling and put the sling over my shoulder. On the way to the car, the strap gives out.Obviously not too thrilled about this because it's juuuust cheap enough to make it not worth my time and money to send back, I inspect the thing to see if it was just a case of a bad unit or if it really was just badly made. Come to find out that the straps, which are made of a material that's prone to unraveling are sewn with NO seam allowance. This means that the fabric will indeed do just what it had done for me- unravel past the seam causing the strap to fall off. Since the other side is doing the same thing the verdict was clear:Badly made.Shame too because if they had just sewn the ends of those straps a little further up the whole thing would have been fine but both sides were identical so there's just no way that this could have been a case of just one bad seam slipping past quality control. Nope. This is a $10 lesson in why that fraction of an inch is so important when it comes to sewing anything.Which makes zero sense as to why this decision was approved all the way through production really because it's not even saving the company any money due to the fact that there was plenty of room to put those seams further up and therefore make it sturdy but, oh well. Live and learn.Since it IS too cheap to return, at this point, I'd recommend for anyone who has already gotten one of these to do themselves a favor and toss in a quick stop seam just below the metal rings on either side before using it and just get something else next time.(For that second seam, since you can't get this thing through a machine without a struggle due to the placement and probably have to do it by hand, I'd recommend something sturdy like button hole thread, embroidery floss or fishing line. Just go straight through everything from the outside of the strap to the interior of the casing. Yes, it will wear out eventually as the bottle rubs against it on the inside of the case itself but at least it'll hopefully keep the thing going long enough to get your money's worth and/or find a better replacement.)

I misread the advertisement. I thought that one bottle would fit both the small and the larger sized bottles. This is not true.There are two sizes of carrier. The smaller one (750) works very well to insulate the bottle. The strap is sturdy and best worn around the waist. I did not find the strap long enough to comfortably wear over my shoulder.The larger bottle carries is the best choice for me! I have an insulated (double wall) steel bottle. The larger career fits perfectly! Also the strap is long enough on that model that I can carry the bottle holder over my shoulder easily. I really like this size. It will also hold the smaller bottles.The design is very lovely. Both size bottle carriers hand nicely if you want to put them on a hook or tree branch. They also prevent your steel bottles from damage if you should drop one. Use the "Select" button to choose your size. I missed that the first time shopping!!

The 750ml size was perfect for me. I was looking for a bottle carrier that would fit regular plastic bottles. I've attached some photos so others who are concerned about sizing can see - the 16.9oz / 500ml Oi Ocha fits with plenty of room to spare. It also fits my 0.48L Zojirushi coffee tumbler perfectly. I don't see any issues with the stitching that some others have mentioned and there is no odor unless I press my nose to the fabric (smells very faintly of neoprene).

So happy to recieve my 750ml bottle holder today! It's height is actually 8.75", which is perfect for my 12" tall 24oz HydroFlask (see photos). It also fit my 750ml Contigo water bottle perfectly. Will update if I run into any issues.

I Purchased both the 750ml & 1000ml versions. They are both well constructed and fully stitched around the bottom seam.I got the 1000ml solid blue carrier hoping it would stretch to hold an  Eternal Naturally Alkaline Spring Water, 1.5L  bottle and it turned out to be able to stretch just enough to fit perfectly. The Eternal bottle has an unusual hourglass shape that is partially flattened along one vertical side so the bottle's bottom diameter does not average much more than 3.4 inches. The carrier's un-stretched diameter is almost 3.2 inches.Incorrect size stated for 1000ml carrier:The website states the 1000ml carrier has a "diameter" of 5.11 inches. The actual measured diameter is almost 3.2 inches. 5.11 inches is obviously a nonsense value for a "diameter" and is probably really the flattened width of the 1000ml carrier. A geometry calculation using 5.11 inches as the width of a flattened circle results in a calculated diameter of a little more than 3.25 inches, which is close to my measured diameter of almost 3.20 inches.Incorrect photo for 750ml solid grey carrier:The solid grey 750ml carrier has matching gray stitching rather than the blue stitching shown in the website photo. The grey stitching makes it look much better and discretely matches any clothes!

Lovely holder for my daughters chill water bottle. Fits like a glove and is good quality. The strap is extendable and her or I can wear it comfortably on our shoulder when walking back from school. Lovely girly design. Haven’t washed it but can’t see a problem with washing as nice thick fabric.

I always carry a water bottle with me and wanted some bag to make it easier.. after searching a lot, found this one.. this is the best looking one I found so far. Quality is good neoprene, handle is average.. got it in good condition.. fits all my bottles (have tried upto 1ltr).. comfortable to wear.. have to see if it lasts.. but it's great so far!Please vote if helpful and have a wonderful day! 😊

A decent product. Perfectly fits 300 ml of milton steel flask. Also fits well 160 ml milton flask with small cup.

Does what it is supposed to do. As shown in pictures and descriptions.

It is good