PLA Plus(PLA+) 3D Printer Filament,Higher Toughness PLA Pro Printing Filament 1.75mm 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm,Black

Filament runs and prints fantastic, I've ran 1.5 rolls and had great results. Half way through the second roll I had a weird issue where the Filament was so brittle it would break and jam my extruder and cause my prints to fail. I think it was just a bad roll. I returned the roll as defective and got a new roll. The new roll has been fantastic so far, just like the first half of the defective roll. This filament has great layer adhesion at 215c and overall leaves a consistent finish. I've had minimal warpage at 60c even on big parts. The tray was printed with 0.6 mm nozzle and was the first half of the bad roll. The print was 16 hours and had zero issues other than that tiny pull up on the corner.

I bought this for a project for a friend, slightly wary as I'd never heard of the brand. While the end result is not quite as nice as the picture they advertise with, it is still quite vivid and of outstanding quality. I'd give it 4.5 Stars if Amazon would let me.

It looks pretty neat after it's done and definitely can do some cool stuff. I foolishly got it for lithograph frames which it doesn't work well for, it more highlights the imperfections of 3d printing than the picture when held in front of light.I mainly rated it down as it reccoments 195-230 as the print temp on the spool as that is way too hot. At that heat it will stick nastily on the first layer. Wasn't until I pushed it down to 185 that I got good adhesion and quality. It definitely works and works very well at that temp. However reconsider if you think this might make a lithograph have a bit more flair.Printer used: Ender 3 Pro

Looks really good don't expect 100% clear if you have a few walls but you can still see through

Always happy with this product, very few failed prints

Grabbed it cuz it was cheaper than esun but it’s way too brittle, maybe it’s the three rolls I received,(2 black one white -all pla+ supposedly)Hooked it up, Started a 2 day print; came back 12 hours later to see the fillament snapped off and stopped feeding. Goin to try again but am nervous about it snapping once again.. my spools are way tooooo dry.Update*:Replacement is fine, first batch couldn’t get a good print to save my life

i've been very happy with this, will be my go-to PLA now

Love this clear filament. I have printed a couple of things I needed as transparent and this filament has been really useful. I use 210 degree nozzle, 70degree bed temperature and the adhesion is good. Its clear filament with the same hardness properties of other colored filaments so perfect for clear project boxes or vases.

The media could not be loaded.  El filamento es excelente y viene muy bien empacado al vacio con su desecante y 2 regalos una regla plastica y una plataforma de impresion adherible una vez impreso tiene un acabado sedoso y brillante muy intenso ,se imprime como el PLA normal y viene con una superficie tipo buildtak de muy buena calidad que ocupe para imprimirlo, estaba esceptico de si la plataforma serviria o no por que viene como producto adicional ,pero vaya sorpresa tiene tan buena adherencia que quitar las impresiones cuesta trabajo ,es un extra que no he visto que tenga otra marca en Mexico ,solo por ese extra y el filamento puedo decir que es el mejor trato que vas a encontrar en Amazon Mexico hasta hoy , regresando al filamento como es PLA+ pense que seria dificil de imprimir y todo lo contrario el perfil es el mismo del PLA normal use 215* en la primera capa y 210* en las demas 65*en la plataforma de impresion en una Ender 3 , como mencione antes y se ve en las imagenes la calidad se nota ,y ademas la dureza del material hace que sea muy dificil de romper hice pruebas y no pude ni doblarlo con la mano, para romperlo se necesitan herramientas y mucha fuerza asi que tambien cumple con ser 5 veces mas duro que el PLA normal .En conclusion seguramente voy a ordenar mas en el futuro cuando se me acabe este rollo este es uno de los pocos productos que vale cada centavo .The filament's quality is excelent, it comes very well packaged and vacum sealed with a desiccant bag and 2 extra gifts an adhesive buildplate and a plastic ruler, once printed its finish is very glossy and shinny,it prints like normal PLA and comes with a buildtak like sticker that i used to print it ,I have to be honest I was skeptic about it working because it was an extra,but boy was I wrong,the prints stick so well its kind of difficult to remove them wich is a good thing,the surace is an extra no other brand in Mexico offers just for that and the filament I can surelly state that this is the best deal youll get in Amazon Mexico untill today,back to the filament it being PLA + made me think it would be hard to print,but au contraire printing profile is the same of normal PLA I used 215* for the first layer and 210* for the rest 65* on the plate I printed it on an Ender 3, as I mentioned before and as you can see in the photos quality is noticeable ,the hardness of the material makes it very difficult to break I did some testing and could not break it by hand for that youll need tools and have to apply a fair amount of force so it delivers on being 5 times stronger than normal PLA.In conclussion I will definitely be ordering morebin the future once I finish this roll,this is one of the products that is worth every penny.

Pros: Viene muy bien enrollado y a la larga parece no tener problemas de tangling. Incluye un mantel de impresión y el carrete tal cual tiene detalles útiles como las marcas de peso/metraje y varios hoyos para guardar el filamentoCons: El rollo me llegó sin estar empaquetado al vacío lo que me hace preocuparme por problemas de humedad. En la primera impresión tuve problemas de stringing y el benchy quedó muy frágil (probablemente relacionado con la humedad)