Laminate Flooring Tools, NAACOO Vinyl Flooring Tools, LVP Installation Kit, Tapping Block with Handle, 2 in 1 Spacers, Heavy Duty Pull Bar, Reinforced Double-Faced Mallet.

All tools are great quality, and works perfectly. If any of these parts break or bend while using them then you are not using it right or something else is wrong.

Very well made .It helped me install my vinyl plank floor

My wife got some lvp. Horrible to install the stuff. She decided on a trim size that allowed me to use the thicker spacing size. The spacers can sometimes pop out if bumped but did their job. Naturally the wife changed her mind and bought a thinner trim size after I installed our largest room. After a few muttered swear words and deciding that there is a special place in hell for such trickery I switched to the smaller gap size provided on the spacers. The tools were awesome and took a beating from not only the mallet, but my near constant string of curse words directed at the flooring I was "locking" into place. The black pull bar did cause some scuffing due to the padding underneath it being askew. I used another pull bar I had from a previous job. Adding stick on felt pads would have solved the problem however. The mallet was great. It outlasted my wooden one and the small striking surface made it much easier to use. This set could be improved with a measuring tool. Given that I have a few boxes of this flooring left I can eventually line the wife's coffin with the lvp planks. I will use be using these tools.

Needed to install 1800 sqft of vinyl click flooring in my home. Kit includes everything I needed. Tools are sturdy. Hammer ends can be replaced if needed. Tools did not damage even one plank of this high quality/expensive flooring, although I damaged (I'm an electrician, not a flooring installer) a few but tools were not at fault. Plenty of spacers and offer dual 1/2" or 3/4" wall/object distancing. Very nice set. Highly recommended. Worth every penny!

Oh boy, gather 'round, my fellow DIY enthusiasts! I recently embarked on a journey to install laminate flooring in my home, armed with the NAACOO Laminate Flooring Tools kit. Let me tell you, it was a hilarious adventure that deserves a review!First up, we have the "Double-Faced Mallet." Now, I don't know about you, but I've had my fair share of mallet mishaps in the past. This bad boy, though, is like the Thor's hammer of laminate flooring! The handle is so well fused to the head that I suspect it might be made of Vibranium. I can confirm - not a single issue with the head falling off or the handle bending. Say goodbye to "accidental" holes in your walls!Next, we have the "Heavy Pull Bar." Forget the flimsy pull bars of yesteryears, this one's got the quenching treatment! It's made from premium steel that's apparently better than A3 steel. I don't know who A3 is, but he's got nothing on this pull bar! Plus, it's thicker than the average pull bar, and it comes with soft pads. My floor has never felt so loved and scratch-free.Now, let's talk about the "2 in 1 Flooring Spacers." These are like the superheroes of spacers, with two sizes to choose from. And the best part? They don't tip over and get stuck like those flimsy spacers in other kits. These spacers are so stable; you'd think they were auditioning for Cirque du Soleil.The "Solid Tapping Block with Handle" is next on our comedy tour. Made from unyielding NYLON, this block is the Chuck Norris of tapping blocks. It's sturdy, durable, and at approximately 7 x 2-3/4 x 3/4 inches, it's the perfect size to handle. You can control the direction and prevent hurting your hand while tapping away your flooring woes.But wait, there's more! The NAACOO kit is different from the others, and it's not just a marketing gimmick. With this kit, you'll be 30% more efficient in your laminate flooring endeavors. It's like having the secret sauce of DIY in your hands. You'll be installing your flooring so conveniently and easily that you'll wonder if you're a professional flooring magician.So, my friends, if you want to turn your DIY flooring project into a comedy show filled with triumphant moments, get yourself the NAACOO Laminate Flooring Tools kit. It's a symphony of DIY frustration prevention, and it might just turn you into the Bob Ross of home improvement. Happy flooring! 🛠️🤣

Was working on remodeling a 114sqft room into an office. Tore up carpet to place in wood look vinyl flooring and needed these tools to install the click together flooring.Everything arrived quickly and it all looked good. Got to work right away with the installing.The spacers were great, no issues with the whatsoever. Was able to put them in place, tap flooring into place, then wiggle them out with no issue.The tapping block was good. It lined up nicely, tapped smoothly and the handle didn't loosen or give any issue. The material of the block is semi-soft, as I began to see it chipping and cutting away slightly by the end of my job. Has a nice lip for the widest part of it and a narrow edge, which made it easy to ensure proper tapping all around the flooring.The metal grip bar was perfect. Has pads to not scratch the flooring. Was able to fit in the space around edges, and gripped the flooring without issue to provide a tight seal. Didn't have any issues with it bending or warping throughout the job.The hammer was frustrating! This was my biggest gripe about the set. I was working with these tools fairly gently and not even a quarter of the way into the project, the hammer head popped off... It appears to be glued in rather cheap, so throughout the job, I had to slap the hammer head back into place after every other row of vinyl flooring. Other than the head falling off, the hammer did it's job without damaging anything.Overall, the box set is great for the cost of it. It's inexpensive, quick to arrive, and gets the job done for small tasks. If you're planning to do a larger space or expect to use it for multiple projects, then I would suggest looking for something a bit higher end. If you just need a small project done at minimal cost, then this will get it done.

I installed 800+ square feet LVP , spanning an entire floor and flowing across two rooms and a hallway, and many closets. Hammer, puller, and spacer are indispensable. Highly recommended.

Did a grood job on flooring . I dont think any could be better.

Well made set of tools to lay click style flooring.

It's worked OK for the first room of hybrid flooring but I'll upgrade the tapping block before I go further. The spacers are a good design. The hammer is too small and the pull bar is just adequate. I probably wouldn't buy this kit again if I had more than a single room to do. It works, but it isn't great.

best investment

I like these shims. Versatile

The tapping block is too small for wider and longer Laminate floors. It would have been better is it is at least 6-8 inches longer.