EGV [2+2 Pack] Compatible for Google Pixel 6 PRO 6.71-inch, Flexible TPU Screen Protector and Glass Camera Lens Protector [Not for Pixel 6] Case Friendly [Support Fingerprint Reader] Transparent

I love the ease with which this screen protector goes on. It is not very sturdy and I literally tore it within the first week of having it on my phone. It is not very compatible with taking your phone in and out of your pocket.

Update Dec. 31, 2022 - A couple of months ago, the lower left corner came loose and dirt got under the screen protector, sticking to the protector. This made it impossible to clean the protector and have it stay flat. Over time, it got worse, making it difficult to use direction arrows that appeared in the lower left corner. So, I had to remove the original screen and install the second one in the box. The screen protector (another brand) on my old phone I retired last summer is still in good condition after five years on the phone. For this reason, I have reduced my rating from 5 stars to 4 stars.I’m a firm believer in cases and screen protectors even though I’ve never seriously dropped a phone in a way that could damage it. So, I’ve applied many protectors, often with a lot of trial and error and occasional bubbles and dust specks remaining.But this was the easiest and best installation I’ve ever done. The tools and directions are excellent. But be sure to watch the video. It really helps. I watched it twice. I would recommend one change. Insert the guide piece into the USB-C slot first, then clean the screen. It’s a tight fit and I smudged the screen, making me have to clean the screen a second time. Also, the guide tabs are designed to align the protector. It does, but I saw a slight misalignment. So, just look closely to ensure the protector is straight on the screen. In other words, don’t get in a hurry. After that the process went well. No bubbles or specks and a perfectly aligned screen. Just run your finger along the edges to push the protector down on the curved edge of the screen if you have the Pixel 6 Pro as I do.I have had no problems with the fingerprint reader or using the touchscreen in any way. Because the Pixel phones don’t have dedicated Home and Back “buttons” I do a lot of swiping with my finger. Because the protector is not a matte or “smudge proof” cover, finger prints will show up. But it’s not bad. I’ve saved the second protector and the tools, but I’m not sure I’ll ever need them.Overall, this is an excellent screen protector and a smooth installation.

The installation kit it comes with work perfect for them, and these have lasted long for me, usually the other gel ones end up with nics, but these have held up well.

After watching the installation video it was simple to install. I installed in my bathroom after taking a long hot shower, supposedly steam keeps the dust down. I do have a couple of tiny bubbles at the top and the bottom but I think they might work out in a day or two. I had originally installed a $50 screen protector and the edges kept lifting so I returned it. Personally I don't even know how necessary screen protectors are considering what the screens are made of now but I figured for $10 for a 2 pack why not. Even if the edges don't stick for $5 each who cares. I only gave it 4 stars for now since it's only been a half hour, I'm waiting to see how it holds up.Also - no problems with the fingerprint or the touch screen.Update - I've had it on for over 24 hours and one issue I have found is that my case makes the edges lift. It could just be my case but I suspect it would be the case with other cases too, but maybe not all. I used small pieces of tape in each corner to help hold it down, the tape isn't visible with the case on. It's not the perfect solution but seems to be working for now.

These were by far the easiest screen protectors I have ever put on a phone. They went on perfectly on the first try. There were no annoying air bubbles to smooth out. The company really made this dummy-proof to put on your phone. The installation video was also very helpful.

A little bit of heat makes the plastic bubble, which deforms it. Which leaves impressions and makes it easy to tear. Same as most of the cheap screen covers. And if you didn't know, pixel's tend to run hot.On the plus side, installation was a breeze

Installation is super easy following the video provided. I love the way it hugs the curved screen of the Pixel Pro. A nice feel when swiping, and cleans up easy. I developed a tear in one corner after a few months which wound up coming loose eventually. I installed the replacement (2 are included in the kit) and notified the seller. They promptly ordered a replacement set to be delivered by Amazon with no hassle. I hope to not need them, but really appreciate a company that stands behind their products.

The quality of the product is good and they provide great online installation instructions. No bubbles, no lifting or peeling, no fingerprint reader issues and, unlike some of the competition, the protectors look decent on the phone. I would definitely purchase these again.

The point of having a screen protector, such as this, is not for glass drop protection. It's to prevent micro-scratches whenever you keep your phone inside your pockets or bags.Installation video is very simple, you just have to follow it. I made a mistake as I didn't install it properly, so sometimes my phone case would hit on the side of the screen protector and cause it to open up. But it's basically my fault, I bet if I took the patience to install it properly, this issue wouldn't exist at all.The fingerprint reader is not an issue at all, Pixel 6 phones has settings that can increase sensitivity with the fingerprint reader. Why spend extravagantly on something "UV light heated screen protector" when something like this does the same job? Save your money and just buy it.Oh and by the way, if it's not obvious, the material isn't glass. It's some sort of plastic, that's why they can say it "self-heals." Like I said, the point of having a screen protector is to avoid micro-scratches.

After months of looking for some sort of screen protector, I almost gave up. I was annoyed that all the glass screen covers had a weird outline for the fingerprint sensor and oven didn't fit the Pixel 6 pro because of the bevel edges.I just wanted a screen protector, not to necessarily protect the screen from cracking, but to prevent scratches. This product came with 2 protectors and was sooooo easy to install. Would recommend this if you need an alternative to glass protector.

I was super reluctant to buy this. Since they've come out I've only bought the gorilla Glass ones. Or whatever glass is the standard. I trust them more because they take the blow and pretty much guarantee your phone screen won't shatter.Well, welcome to 2021-22 where every damn phone has to have curved edges. This makes me so mad. So I either get a $30 curved edges glass cover that I literally have to glue to my screen, or opt for a gel one like this.I can't say for certain this would ever protect my screen from fall damage but it's definitely good for scratches and small bumps.I have zero problems with the fingerprint stuff on default settings.The camera cover is a nice touch. Realize that a camera flash will reflect light onto ANY glass and not give you accurate photo light. So even though his one has a black layer to circumvent that light bleed, it won't eliminate it 100% but it's definitely better than my partner's phone which has a clear glass cover.Overall this is the cover to get imo. I'm sure there are great ones out there but for the price and the black layered camera cover, you can't go wrong.

Bon qualité. Facile à installer