LIVLOVV2 Bike Cadence and Speed Sensor - Bluetooth 5.0 ANT+ Wireless Cadence Monitor & IP67 Waterproof RPM Cycling Sensor Compatible with Wahoo Zwift Strava Peloton Garmin Bike Computers

Cadence and speed sensor cannot work with the wahoo app. You can only use one of the sensor. both should work with bike computer.

Works with old tack

Works great but have spent a fortune replacing battery’s every few weeks, every time I go to use it the battery’s are dead again!

My cycling computer starts to complain about "Speed sensor battery low" a day after changing the battery in the speed sensor, before I even start to cycle.

A bike speed sensor is very useful if you ride in places where you can lose signal so you can still track the speed and determine the distance of your trip based on the bike's wheel circumference.This speed sensor tracks your cycling speed in real-time. Its RPM cadence and speed sensor are widely compatible with most iOS and Android fitness applications such as Zwift, TrainerRoad, Rouvy, Cyclemeter, Openrider, Tacx, RideWithGPS, Peleton and more. The size of the device is approximately 38.5 x 38 x 12mm and only weighs 10.5 grams so it can be easily installed on your bike.The device is waterproof, sweatproof and dustproof. Its signal strength is up to 20 feet and it is equipped with a replaceable button battery that lasts up to 500 hours. To replace the battery, you can use a coin to unscrew and replace it. Just simple as that.It has no magnets but it is wireless that can be easily attached to your bike's crank arm or wheel hub through the included rubber-elastic rings and double-sided tape.I received a cadence and a speed sensor and I used them immediately right after I got them. The result is accurate since I also turned on my GPS to see if the sensors really track my distance in real-time. The installation and set-up process of these small devices is very easy. The overall build of the products are also impressive. I am excited to use these two again after winter!At £28.99, I must say that these two are a great price for the accuracy and quality.

These sensors do exactly what it says on the tin (so far at least). They connect easily, I haven't noticed any dropping of the connection to my GPS, and they seem accurate....but BEWARE!! After only about three weeks of use on the bike, the rubber O-rings that are used to secure them had completely perished and if I hadn't noticed I would definitely have lost one, if not both of them.Buy a load of O-rings and check them before every ride.

Excellent quality bike cadence and speed sensor, highly compatible with multiple fitness tracking apps and devices via Bluetooth, I like that they match and look so modern and streamlined in design.They are very easy to attach to different parts of your bike with ease and are a magnetless design , very accurate with excellent battery life and performance, they are small and lightweight in design and I like that the warranty and after care seems really good too.These are great to monitor your fitness levels , speed, stamina, endurance, they are a great way to keep an accurate account of your overall performance whichever platform or account you use these should be easy to use in conjunction with your apps and devices because they are very compatible and easy to use and set up.I like to go on regular bike rides and like to keep an eye on my data, it just adds to the overall experience of the ride ,to see where you are improving and keeping a close eye on your stats.My fitness levels are low at the moment due to poor health so I'm looking forward to keeping track of my fitness with these next year and onwards, they are well made , seem robust and durable, I like how easy they are to attach too and the battery life seems really good , handy to have extra battery too.

These speed cadence sensors are super easy to put on and set up. They come with rubber straps to attach to your hub and the cadence sensor attaches to your crank arm. They are powered by button cell batteries and these will last you a good while. I have these connected to my Garmin. They connect via Bluetooth or Ant+ so if you have zwift these would be great for that to connect to your computer. They are very lightweight and unobtrusive. Perhaps not as streamline as the official Garmin ones but seem to do the same job at a much lower price. They seem pretty accurate so far and they have been in all sorts of weather conditions.I can recommend them if your after some speed cadence sensors.

Seems to work correctly.

I did not need to get both speed and cadence. I got the speed attached to the pedal crank and I use it with Cyclemeter. The trick is to go into the app and figure out the tire diameter. I played around with tire diameters until I got a perfect simulation of my outdoor ride. Absolutely love it!

Non avevo mai installato dei sensori bluetooth e come prima esperienza è andata molto bene le batterie stanno facendo il loro dovere.

Productos muy fácil de conectar a una app de ciclismo y funciona muy bien ambos sensores.Muy recomendablesEdito: las gomas de sujeción son una porquería.... En una salida he perdido el sensor de cadencia, asado con dos gomas de las que trae el propio producto, y ya esta semana estando la bicicleta aparcada en el garaje se ha caído el sensor de velocidad del buje delantero porque la goma se ha roto....Muy malas las gomas de sujeción una lástima para un buen producto

Die Sensoren wurden primär gekauft, um mit "Elite My E-Training" am Rad auf einem Rollentrainer eingesetzt zu werden. Das hat problemlos geklappt. Danach wurde auch noch probehalber die Registrierung unter "Samsung Health" durchgeführt, wobei die Sensoren dabei als "Wahoo ..." angemeldet werden müssen, da die Auswahlliste der App nur wenige, ausgewählte Geräte zur Anbindung anbietet. Außerdem stehen die Sensoren in dieser App nur für "Radfahren" zur Verfügung, nicht aber zur Nutzung mit "Heimtrainer" (aber das ist eine der Schwächen der App).Unbedingt zu beachten ist, dass:- die Sensoren bei Bluetooth nur Versionen >= 5 unterstützen (das ältere Geräte, die verbreitet nur Version 4.x unterstützen, können nicht "gepaired" werden; der Versuch z.B. mit einem Galaxy Tab S2 schlug fehl)- es einer geeigneten App zur Nutzung bedarf, ein simples Pairing, wie man es von anderen Geräten (Headsets, etc.) kennt, so dass die Sensoren danach in der allgemeinen Liste der Bluetooth Geräte erscheinen, ist nicht vorgesehen.