Amazon BasicsHard Camera Case, Small, Black, Solid, 12"L x 11"W x 6"H

Others have written (positively) about the general features of this case and I concur with those conclusions. But I wanted to leave this review for a specific use - holding a set of the Rokinon/Samyang Cine-AF lenses launched in 2023. This case is as close to perfect as you can get for this purpose - and at a really great price.I ordered this case the same day I ordered my new set of Rokinon Cine-AF lenses. I had been looking for a hard case that would fit the set well (not too big, but still enough padding.) The measurements on the product description indicated this would fit the bill. The lenses and the case arrived the same day and after (carefully) pulling the pick-foam from the right spots, it became clear the case was exactly what I needed. The fit is snug, but snug is safe. There's even room for a fifth lens when the 20mm comes out.The latches are tight, but I suspect they'll loosen up some over time.

Excellent case. Super sturdy. Wish Amazon sold photo equipment inserts that fit. Will get through another manufacturer. Hinges & locks are great. Wheels seem sturdy and well made. Foam inserts are pluck and fit. Quick delivery

... I thought it would suck, but that was not the case ...... 😏 ...... I haven't challenged the case for durability, but it does seem solid and sturdy ...

These things always get me. For some reason they always seem smaller when you actually get them in hand. I bought two of these. The medium and the smaller one. The build quality is great from what I can tell. I don’t think you’d be able to tell the difference between a named brand one vs these. These can do the job. There was pluck-able foam which made for easy installation of your tools or gear, I just wish it had been just a tad bit stiffer. But If you’re looking for something to protect your gear and not as expensive as the high dollar one. I recommend these. Plus I like that there is not 1,000 sizes.

I wanted a case for an Auber PID, (an external thermostat) for my smoker. I had been storing it outside, unprotected, in an outdoor kitchen area. I wanted to make sure it was protected from the weather, moisture, dirt and dust. I thought about getting a Pelican Case from Amazon, but the size was just off and the next size up was too pricey.After researching it on Amazon, I found that Amazon Basics had a very similar case that was just the right size. When I received it, I was surprised and very pleased at how easy it was to pick away the pre-cut foam to get a custom fit. There is also a second piece of foam if it is necessary, which in my case, it wasn't.I can't compare this case to a Pelican because I've never owned one. I realize they are considered the Mercedes of this category, but if your needs are more basic, as were mine, this is an ideal way to protect small electronics with a hard plastic case that shuts super tight in order to keep out the elements.I think this case is a great value and a very well designed product. I wouldn’t hesitate to buy it again!

I bought this for my paranormal equipment. I even received it a day early. So perfect, that I ordered another one! Luckily it comes with 2 foam inserts (as well as a fixed piece on the top and bottom), as I screwed up on the first one and had to redo it. Sturdy, well made case. I would definitely recommend them!

Really good stout case, not the easiest foam to modify but just make sure your blade is sharp and you shouldn't have any trouble making spaces for your items.Foam waffle weave glued to the lid and comes in two layers of pick foam on this model each about 2.5" thick plus there is a solid layer of foam under these about 1" so there is a lot of padding available.Very secure once you close the latches and lock them down, should protect things well.All that being said just like any of these small cases/safes even if pad locked or securely closed, if you want to open them and don't care about the case, a small 3lb sledge will probably crack any of them open without too much effort.Just be aware of what purpose it is serving. Was bought to organize and protect some electronics.Great all around case and highly recommend it.

If you have ever had a Pelican Case, you know how secure a box can be. Positive latching and tight fits make you believe that you could drop one of these multiple times, or even submerge it, and never have an issue. While I have never tried putting it under water, cases like this are great for traveling and toting. The amazon case, is seemingly made with the same specifications in mind. All the features of a Pelican Case are present at a lower cost.For this current case, I was able to configure the foam to hold a Sony a6500 with a 24-105 lens attached, along with the 70-300 zoom to the side. There is still room for extra batteries and a short strap. While this does not replace my soft case, it is great for putting in luggage for a bit extra protection or in the back seat of a car while traveling. Great and durable protection, just the right size for what I normally need with me.

I've always been impressed by Amazon Basics, and this product is no exception. If you're hesitant about purchasing it, prepare to be pleasantly surprised by its spaciousness and sturdiness. Previously, I needed two bags to carry my cameras, but now, I can fit them all in this single case (see the picture). Its sense of security provides me with peace of mind. The addition of wheels is an invaluable feature, especially as I create content in various locations. I managed to snag it at a discounted price, paying only half of its original cost. However, even at full price, it's a worthwhile investment for safeguarding your precious equipment.

bonito y resistente

Produit conforme à mes attentes.

Surprisingly good hard case at a fraction of the cost of a Pelican or HPRC. It's well made and very strong with two layers of pluckable foam, a lower layer of fitted foam and egg box foam in the lid. The foam plucks easily (I used matchsticks to mark the corners prior to plucking) but is strong enough not to separate in use. The two pluckable layers make it easy to vary the depth for various items, such as the XLR adapter and handle in the photo which only need the top layer plucked.I normally buy branded cases for camera equipment but thought I'd give this one a go for my new GH7 rig as it required a fairly large case which was going to cost the price of another lens! I'm not disappointed, however we'll see how it performs in commercial use over the next few months.The only slightly negative observation is the case latches are very stiff, more so for closing than opening. I would have preferred the latches on the bottom section with a two stage operation, rather than on the lid in a single operation. Hopefully they will ease off over time, and better stiff than loose.The two handles are a nice touch, and the pull-along handle extends via a spring loaded mechanism by pinching two latches recessed into the case base. Fully retracted it acts as a handle on the top of the case, with no chance of it pulling out in use. The wheels are good quality and fitted using a nut and bolt with a spring clip to prevent them coming off, a fairly premium feature. They are also pretty quiet when pulling the case, unlike some.Overall I would recommend this case to protect expensive equipment, it may be Amazon Basics but there's not much basic about it!

Für den Preis gute Qualität. Geht zwar besser, dann wirds aber sehr viel teurer...