DuraSteel304 Stainless Steel Utility Sink - 24 Inch Restaurant Prep Sink with Faucet - Dual CEC & NSF Certified Freestanding Wash Station for Kitchen, Laundry, Garage

The sink is well made and sturdy.The faucet they offer is a piece of junk,especially if you're mounting it to the sink with their install kit. I wouldn't use it unless there's a floor drain right under it, you'll need it to catch the leaks. Best to just buy the sink and get the faucet elsewhere. There's many better options that are also at a better price.Edit:After a bit of use, one criticism of the sink. Even when properly leveled, the poor grading of the pattern at the sink bottom prevents all the water from draining. So there's always a little water left in the sink.

This sink was just what I was looking for for a 17 1/2" space between the garage wall and washing machine in my garage. My old concrete sink had cracked, I think from being forced into the space because the smallest standard sink I could find was 18". This sink is 15" although the rim and back add another 3". My plumbers cut off the back level with the sink top and it fits perfectly with a little room to spare. We had to put it in sideways but the existing faucet extended over the sink, so although I did replace it because of a leaking mixing valve, the existing plumbing was fine. I did not really pay attention to them putting in the drain pipe, but I do not think it was an issue hooking up a plastic pipe to the exiting iron(?) pipe. The sink is nice and deep so overflows from washer outlet hose should not be an issue. The legs just fit in the bottom and their are plastic inserts for the bottom which you can adjust to make the legs level with the floor (and which also add height to the sink. This sink should last a life time.

For a utility sink it looks pretty good. The legs are secured well enough and the sink is stable enough for a laundry room. Some have commented that the faucet seems cheap and I have to disagree with that. It's made from solid chrome plated brass and has a simple commercial design. The biggest problem I ran into was how to mount the faucet to the sink. I believe the manufacturer didn't provide a mounting kit because there are a number of ways to hook-up a faucet. After spending hours looking at plumbing parts I found a kit for sale online at 'ATS Supply' out of Maryland. It comes with everything to mount the faucet, supply water using 3/8" flexible sink line compression fittings, and still be able to flush the sink to the wall.

Love this sink, it’s deep and fits nicely in our small laundry room. Glad my husband talked me into getting it after I wanted our old much larger one removed. I found I use it more often than I thought. Great buy!

I'd LOVE to give this one a 5 star on quality of the steel and look. It's just what I've wanted! You can soak clothes and have a washer drain into it and no more overflow and still have room to work in it. But the legs came bent and the bevel in the bottom of the sink does not allow proper drainage so residue sits in the bottom. It needs more of a bevel for a sink this size. Otherwise, love it. Poor packaging- which would be easy to remedy having read other reviews.Update- Pure Garbage and the lowest grade of stainless you can buy. It rusted around the drain it two years. It's a mess. In fact saw rust in just weeks after purchase. Pay for a better grade of steel and save yourself the replacement cost in just two years.Purchased January 2017 and now the entire area by the drain is rusted. Piece of junk!Edit- two years later this thing develops rust! What the heck? Stainless rusts? Dimensions wrong and that is a problem since I'm short and can't reach to clean the window behind it even with a three step ladder. Rusted almost immediately.

Looked forever for a stainless laundry sink that will accommodate wall mount faucet. This is so small and short. Unfortunately my plumber install and now will have to find something else as it is about 6" shorter than where my existing wall mount faucets are, couldn't even use the holes in the sink and it looks ridiculous

Just gotta give this a five'er. Seller must read these reviews, because the sink was VERY well packed, with little plastic bumpers on all 3 sides. This is going in my cellar, & I wanted all stainless, including the legs, and I wanted braced legs. This unit did not disappoint. Fit & finish were a-ok & the unit is stable when assembled. The nice ss set screws are a nice touch. As other's have also stated, the shipping box is unbelievably flimsy.....it came all taped up from shipping from China, however, the contents arrived undamaged.

Perfect! Excellent bang for your buck considering you get the faucet with it. You do need to buy some additional parts. Been using mine since 2017- i use P21s polishing soap to keep it clean and water beading on the inside - also to prevent any rust that may occur due to any impurity’s in the stainless steel (there always will be at this price point).Great customer service and easy to get a hold of.

Made my laundry room looks very nice and modern. It was well wrapped and packaged when it arrived. Exactly like in the picture, stainless body and it comes with a faucet that is of good quality. The stand comes with adjustments to level the sink in case the floor is not even like mine. Installation is straight forward - no issue encountered.

Beautiful sink... I love it! It is my new laundry sink and just shines. Easy to clean.

This is a well made and attractive sink. We chose to replace the supplied faucet set with a MaxSen commercial faucet set but that was just our choice. The problem is that the low grade sink drain stopper leaves the rubber stopper stuck in the drain when you lift to remove it. Chrome tray and pole slip right through. Shame this irritating oversight blemishes my opinion.

The media could not be loaded. I received this sink new on March 9th 2022 and installed it in my new home on April 11th 2022. The sink remained in the original shipping package until it was installed. When we turned on the water we noticed a small leak on the bottom left inside corner weld, see attached video. I contacted the seller and their response was “the sink didn’t appear to be cleaned periodically and the buildup on the surface will become acidic and corrosive to the stainless steel coating”! This is a brand new sink that leaked right out of the box.

I would say this is great value for money given the quality of the sink although the faucet is a little basic and does not look as if it will sustain the wear and tear that the sink will undoubtedly receive over the years. .Also there were no instructions included nor was the screw driver (inclusions). I am therefore not sure if I have all the pieces and I cannot say if the faucet is any good as I will have to try and install it without the instructions and only at that time find out if any part is missing!