Round Solid Wood Furniture Legs Sofa Replacement Legs Perfect for Mid-Century Modern/Great IKEA hack for Sofa, Couch, Bed, Coffee Table (4 Inches,Set of 4, Original Wood Color)

These are affordable, sturdy legs but the color of the ones I received weren't even close to walnut. The color is more that fruitwood color. Also check that you can swap out - the plates they provide are too large for the area available on my sofa.

I refinish dressers as a hobby, and I have purchased these legs at least 5 times. They are a nice color, sturdy, and easy to install. One of my favorites!

I bought these to give my IKEA toyshelves a little functional facelift. I have a robot vacuum and try to choose furniture with legs so that the vacuum can get underneath all of them. But this toy cubby worked too well for my needs, I couldn’t replace it. I bought a couple of sets of these legs in walnut and added them in an afternoon. Such an easy way to make this shelf more functional and look better too.I did have to provide some of my own screws, since the ones the legs came with were too long and would have punctured through the bottom. I also needed 6 legs instead of 4 to keep the shelf from slumping, but that’s not the legs’ fault. Finally, be sure to drill pilot holes in both the legs themselves and the furniture.As others have said, I was gentle when flipping the piece back over. I would never lever the shelf on these legs to flip it, but standing as it is, it’s very sturdy and stable.

Beautiful, solid, just what I needed. The cabinet I'm adding them to just got named "Lieutenant DAN!"sadly, missing the pads for the bottom, got an extra bag of screws. if you got my pads and are missing screws, hmu.

They are difficult to install but well worth it for the look. These have a deeper angle than most similar ones sold on Amazon which is beautiful.You will want to power drill to install them and possible an extra set of hands or a vice.The legs are solid hardwood as advertised so they are very very strong. But, the short screws used to connect the plate to the legs are not ideal and don’t seem to be long enough. If you used the provide shorter screws to connect the plate to the legs, be extra careful when flipping the furniture back over. The legs legs will tear from the plate and screws if weight is applied to them sideways (for instance, using the legs as a mechanical fulcrum when flipping). However, this shouldn’t disuade you from purchasing them or other that have a similar attachment design. They are very strong when they are in the correct orientation.They also come with felt sticky pads for the bottoms of each leg to avoid floor scratches which is a nice addition. Do not remove them after initially installing, the wood will strip and they will fall off when you try to put the back on, so I don’t recommend this style if you move a lot. Also, if moving the furniture into a truck or something of the sorts, do not use the legs as handles. Very important as that will make the connection between the plate and legs weak and likely cause the short screws to come out of the wood.

I was very impressed with installing two sets of these tonight. I can't speak to long term durability but I can tell you they look spectacular and they were easy to install. I put these on a 5 year old sofa+loveseat from Scandinavian Designs and they totally revitalized the set from meh to WOW! I do have some advice though.You definitely will want an extension/long reach phillips (#2) or you'll destroy the legs with your cordless screwdriver. If you're a DIYer, you prolly already have one. If not, go get one. (This is what I have/like: IRWIN Drill Extension Bit Holder, Quick Change, 12-inch (4935705)). I set my clutch at 8 to keep from stripping the legs as they seemed to start to give way at 12. (Of course your clutch will/may be different but you can compare to IKEA only managing a 4 before tearing loose for me.)The instructions are really terrible but you can sort it out. Definitely you should note that the plate is not drilled to aim the legs out of corners right at 45*. You have to pick whether they go ~20* out or forward. I would highly advise that you mount all of the legs to the plates first, noting the angles very carefully and then labeling them for the corner. Then, attachment of the leg-plate assembly to the furniture is really straightforward. For as well made as these are, it seems like a no-brainer to send decent instructions and stamp the plates. They could pay for the extra effort with all of the zip lock back and extra screws they send. :-)(I'll update this review if at any time in the future I encounter durability issues.)

They were delivered without and flaws. Very sturdy and easy to install. Just make sure when you mount them that they are all going in the correct direction.. lol

Replaced traditional 4" legs on a too short modern black sideboard with these beautiful 6" pecan toned angled legs.Also added brass glides (Amazon) to the bottoms and wow!Took 15 minutes to turn a contemporary piece into a MCM work of art for little cash or labor.

Great furniture legs - good mid century colour and very hard wood. Good price.

N/A

The legs came in on time and they fit perfectly to my coffee table.