Invision TV Wall Bracket Mount for 24-43 Inch Screens, VESA 100x100mm to 200x200mm, Ultra Slim Tilts Swivels & Extends for LED LCD Plasma Flat and Curved Screens, Max Weight Capacity 27.2kg (HDTV-M)

Fantastic piece of kit, but installation aids could be improved.CONs. OK, let's get the negatives out of the way first, then I can tell you what a fabulous piece of kit this is.1. Good range of bolts, but the ones needed for my LG 42-inch weren't there. So I used those supplied with the tv which seem a tiny bit short. Fingers crossed.2. I think a paper mounting-template would greatly help, to mark the holes in the wall that need drilling. Without it you need another person to hold the rather heavy bracket so you could mark the wall accurately.3. Cable and fixture covers were very neat, but the latter tends to snap out when you swing the arm out. It just needs a tiny bit more of a lip, or lugs, to enable the fixture cover to stay in place.3. Wall fixing screws and plugs are quite hard to secure. Instructions are good, but to tighten up to firmly secure the hexagonal bolt head was tough work, because (a) half the thickness of the bolt head is obstructed by the raise lip surrounding the hole. Solution, a couple of washers would give you full leverage on the bolt head. I didn't bother, but doggedly tightened up because the bolt/screw was too deep in the wall by this time. So I think it's a good tip to use washers. Also another tip: smear the length of the screw/bolt with a bit of vaseline to lubricate the screwing! Photo 1 shows how the raised lips around the bolt heads were scratched in order to drive the bolts fully home. The photo also shows how a thicker lip around the rim of the cover would stop it from coming loose every time you swing the tv.PROs. Wow, where do I start.?1. Very strong bracket (40kg support)! My 42inch weighs 20kg, so I'm confident it will stay up (hope the LG bolts hold on the tv fixing plate!2. Looks and feels strong , and the covers are a lovely touch. I'd be proud to have this in a hotel or conference room. (Photo 2). Incidentally each cable cover does have pronounced lips, which firmly secure them to the arm.3. Very reasonable price!! Only a couple of quid more than a China-made bracket you can get from some shops, which can only support up to 20kg (and look scrappy and store-roomish!!) The Invision one looks professional and hospitable (not that you can see it unless in a hotel room).4. Overall, great quality, looks fabulous when installed, and for the price, you can't go wrong!Hope this review is helpful to customers as well as the manufacturer.

Really impressed with this TV mount, a solid and well designed piece of kit for a great price. The bracket is compact so takes up very little wall space and when fitted allows adjustment of the TV in a number of different planes / positions which is great if you wish to manoeuvre the telly to a particular viewing position.In terms of installation, this is fairly straight forward. The mount comes with a set of 4 off M10 x 80mm bolts c/w with rawl plugs which require the wall to be pre-drilled. Before doing this I measured up where the TV was to be positioned in order to locate the centre point which I then aligned to the centre of the collapsed bracket. As noted elsewhere the bracket is quite heavy so an extra pair of hands is helpful to hold the thing in place whilst marking the hole positions for drilling. The holes need to be drilled a minimum of 80mm deep with a 10mm masonry drill bit which is not easy when your drilling into brick/stone so a good drill is a necessity (ideally am SDS type which makes the job easier). Once drilled and wall plugs inserted the mount can be positioned and the bolts screwed into the wall. A word of caution : I attempted to screw the bolts using a hand held electric screwdriver but this didn't have sufficient torque to screw all the bolts all the way in (stopped turning about a 1/4 of the way in!). The mount comes with a fiddly little spanner which IMO is not suited to the job, a much better tool to use is a ratchet and socket which makes the job much easier and quicker, certainly better than using a spanner.After screwing the mount to the wall, I initially feared I might have a problem as it was slightly out of alignment as indicated by a spirit level. My initial panic was relieved, however, as the design of the mount allows the TV to be rotated to correct for any horizontal / vertical misalignment of the fixed mount - great design feature! Attaching the TV to the mount is fiddly (again better with two pair of hands) but do-able and the end product is great. All told a happy customer!To summarise:Pro's1. Solid and well designed (particularly the ability to rotate TV to correct for any potential vertical / misalignment of the bracket screwed to the wall).2. Compact design allows for TV to be viewed comfortably from a number of different viewing positions or simply flush against the wall.Cons1. Not suited for mounting to raised plasterboard, bolts need to be screwed full 80mm depth to provide full load capability.2. Quite heavy - recommend a second person to hold when marking holes and attaching TV.2. Requires additional tools - masonry 'hammer' drill and ratchet and socket set.

L'installation était facile et simple, sur un mur en placoplâtre mais avec 5 chevilles pour placoplâtre très résistants (chacun supportant théoriquement jusqu'à 20 kg ...) pour tenir un écran de PC de 82 cm.Tout va bien et fonctionne bien. Les axes principaux sont un peu difficiles à déplacer. Je me demande s'ils deviendront un peu plus faciles à utiliser (probablement l'écran n'est pas assez lourd)Peut-être un point mineur qui pourra être perfectionné dans une future version. Nous utilisons l'écran incliné à son inclinaison maximale de 15°. Lorsqu'on le replace au mur, il reste incliné et ne reste pas à 0°. Je n'ai pas réussi à serrer juste comme il faut pour pouvoir bouger sans qu'il bouge tout seul.Service client top. Ils ont répondu à ma question super rapidement. De plus, ils garantissent 25 ans...

The media could not be loaded.  Lo compramos porque necesitábamos orientar la televisión hacia varios lados.Gracias al soporte, la televisión (en mi caso, de 32 pulgadas) gira más de 90 grados.Es muy fácil el montaje, trae tornillos para cualquier tipo de televisor.Los materiales son de buena calidad, lo llevo utilizando durante un año y no he tenido ningún problema.

Auch dreimal so teure Produkte sind nicht besser. Die sehr solide Wandhalterung besticht durch ihre schnörkellose und durchdachte Zweckmäßigkeit. 4 Bauteile tragen das Ganze: die schmale Wandplatte mit diversen Bohrungen für verschiedene Montagearten, davon ausgehend der mit zwei starken Bolzenschrauben in kunststoffgefütterten Stahlbuchsen geführte schwenkbare Doppelarm, der ebenfalls voll schwenkbare Einzelarm, und die daran mit kippbarer Halterung befestigte Halteplatte für den TV mit Bohrungen in Vesa-Norm 20x20 cm. Drei Kunststoff-Blenden sind auf die Auslegerarme aufgesteckt und verdecken dann alle Kabel. Eine vierte, geteilte Abdeckung bedeckt die Wandplatte mit dem Gelenk aus den beiden Bolzenschrauben.Die Wandplatte kann mit drei Schrauben senkrecht oder vier Schrauben an den Ecken befestigt werden, dafür liegen vier ordentliche 10-er Dübel und vier Schrauben mit Sechskantkopf bei, allerdings keine Unterlegscheiben, die ich ergänzt habe. Die Ausleger können um 180° gewendet werden, wenn man die beiden Bolzenschrauben herausdreht. Das kann sinnvoll sein, da die Wandplatte nicht mittig hinter dem Fernseher sitzt, sondern einseitig versetzt ist, wenn man diesen Versatz auf der anderen Seite haben will.Genial ist, dass die Montageplatte für den TV abgenommen werden kann. Sie sitzt auf einem "Aufhängehaken" und ist mit zwei Schrauben gesichert. 4 kräftige Schrauben halten den TV. Es sind genügend Schrauben unterschiedlicher Länge und Dicke dabei, allerdings auch hier keine Unterlegscheiben, die ich ebenfalls ergänzt habe. So hängt man einfach den montierten Fernseher samt Platte in den Haken ein und sichert das Ganze; das kann auch eine Person allein.Der Fernseher kann auch um 10° nach vorn oder 2° nach hinten gekippt werden. Dazu werden an den vier Schlossschrauben die Muttern gelockert. Ein einfacher Schraubenschlüssel für alle Maße liegt bei. Ich werde diese Muttern aber durch Flügelmuttern ersetzen, dann spart man sich hier das Werkzeug und kann die Neigung leichter verändern.Ein TV bis max. 100 cm Bildschirmdiagonale kann an der Halterung beiderseits bis maximal 180° geschwenkt werden, breitere entsprechend weniger. Auch ohne Extrafettung quietscht nichts.Insgesamt ein geniales Gerät zum Supersparpreis, das seine guten Wertungen verdient.

5-stars all the way. This mount is heavy -- which is a good thing. It is very strong and heavy duty. Having owned less expensive mounts, where I was always concerned about how long the mount would actually hold the TV, I have no concerns on this one. It feels extremely solid. It has a full range of horizontal motion. Fully extended from the wall, it appears to be about 19". When folded flat on itself, the TV bracket is centered about 5" to the right of where the mount is attached to the wall. You can clearly see the offset in the pictures provided by the manufacturer. While I'm sure with a little work, you could make it offset 5" to the left of the wall anchors, it is designed to have the TV to the right of the wall anchors.The mount is well-designed. The VESA bracket can be removed from the mount, connected to the TV, and when re-attaching to the mount, there is a slot and tab connection so you can hang the TV (temporarily) to the mount and then affix without having to hold the TV while trying to tighten the connectors.All connection points require a wrench (included, you might want to tape the wrench to the mount when finished so you always know where it is). Package includes 4 mounting bolts, 4 masonry anchors, 4 1/2" spacers and 4 3/4" spacers (spacers are used if required on TVs that have recessed VESA mounts), and assorted screw sizes for mounting the bracket to the TV.Everything is metal with the exception of the "cable management" pieces. They are black plastic that fits over the black metal frame to hold the cables. The plastic parts are light-weight and flexible, but should serve their purpose well.I have not actually mounted my TV on this mount yet because of the size of holes required to connect to the wall. I will be moving soon and don't want to leave 3 holes in the wood wall.My only regret is not buying more of these. Like others, I got it on sale and was absolutely amazed by the quality. I'd love to have a couple of these for my monitors on my desk (pull them out when using the computer and push them back when working on other things. At the current price, this mount is still an incredibly good deal. I've paid more for mounts that were far inferior in build quality and functionality.I like the mount so much, not only did I pull it out of the box just to review it (after receiving the email asking me to review it), but I'm sitting here playing with it.As with any item I buy, there are some improvements that could be made (whether anyone else would see them as improvements is debatable).Improvements I would like:1. The wrench should be black instead of chrome so that it can be attached to the mount without being obvious. Of course, the wrench could be taped inside the cable management cover and that would also resolve the issue.2. Wing nuts in place of the nuts. The standard nuts can certainly be tightened more firmly than wing nuts. This would negate item #1.3. All mounting hardware is chrome instead of black. None of it should be visible once the tv is mounted anyway. If it is, a dab of black paint will solve that.Those are really some nit-picky improvements, so I hope that explains how much I really like the product. This is truly the best purchase I've made in a long time.

Ho pagato questo articolo 32.99 euro, dopo averne visti altri simili nei negozi a prezzo due o più volte superiori.Mi ha convinto all'acquisto la numerosità degli acquirenti precedenti e le tante loro utili risposte che hanno risolto alcuni miei dubbi, un vero valore di supporto prevendita.Ho acquistato il prodotto per montare a parete un LCD 32 pollici, confidando che essendo dimensionato anche per televisori più grandi avrei goduto di una robustezza più che adeguata; posso dire che il prodotto ha confermato pienamente le mie speranze.Il prodotto è completo di tutto quanto mecessario a montarlo su travi di legno o muri pieni; dovendolo montare su un muro di forati (N.B. con un televisore che pesa solo 6kg) ho preferito comprare ed usare dei tasselli specifici invece di quelli forniti nella confezione.Ho voluto un prodotto così articolato per poter accedere comodamente ai connettori del televisore in caso dovessi cambiare dei cablaggi.L'installazione richiede una certa precisione, ma piccoli errori di verticalità in fase di montaggio della staffa possono poi essere compensati con una regolazione disponibile sulla piastra a cui si attacca il televisore.Il montaggio e facile ed adeguatamente illustrato nelle istruzioni, segnalo solo che vi servirà l'aiuto di un'altra persona nel momento in cui dovrete "agganciare" il televisore alla staffa dopo avergli connesso l'apposita piastra.Molto utili e ben fatti i passacavi, dotazione spesso assente su modelli di ben altro prezzo; un tocco di raffinatezza viene anche dalla copertura in plastica della staffa attaccata al muro.Se proprio gli volete trovare un difetto si può dire che alcune lavorazioni di saldatura non sono finite benissimo ma si tratta di particolari che restano nascosti alla vista dal televisore, sono parzialmente mimetizzati dal colore scuro e quindi visibili solo a distanza ravvicinata in fase di montaggio della piastra; tutto il resto appare ben lavorato con tagli e piegature precise e ben verniciato, nessuna bava o asperità pericolosa, onestamente a questo prezzo non si può chiedere di più a livello di finitura.Gli snodi sono piuttosto frenati, presumibilmente per avere un freno adeguato anche con televisori di una certa massa, non ho provato a verificare se è possibile renderli più fluidi agendo sulle viti alle loro estremità; le istruzioni non illustrano tale possibilità, per ora aspetterò qualche settimana per vedere se si "smollano" un po con l'uso, poi valuterò l'eventuale necessità di regolazioni.Sono molto soddisfatto di questo articolo e ne raccomando l'acquisto, solo chi vuole il massimo della finitura anche in parti che normalmente non si vedono potrebbe avere ragione di guardare altrove mettendo in conto una spesa molto superiore.